Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex CEF618F-C green single insulated cord end ferrules for 6 mm² flexible stranded conductors with an 18 mm barrel length, supplied in a pack of 100 for professional electrical conductor termination.
£4.49
The Partex CEF618F-C is a single insulated cord end ferrule designed for terminating flexible stranded electrical conductors in industrial control panels, electrical distribution equipment and automation systems. Featuring a 6 mm² nominal conductor size, 18 mm barrel length and green insulated collar, this ferrule provides a practical solution for preparing conductors for compatible electrical terminal connections.
As part of the Partex insulated cord end ferrule range, the CEF618F-C helps keep individual conductor strands together during termination. Its metal barrel is designed to be crimped onto a correctly prepared conductor, while the insulated collar provides a defined conductor entry point and a neat transition between the cable insulation and the terminated end.
Supplied in a convenient pack of 100 ferrules, the CEF618F-C is suitable for electrical contractors, control-panel builders, machinery manufacturers and industrial maintenance engineers requiring consistent cable preparation and reliable conductor termination in professional electrical installations.
Flexible stranded conductors are widely used in industrial control panels, motor control equipment and automation systems. When these conductors are connected to suitable electrical terminals, a correctly selected cord end ferrule helps maintain the conductor strands together, providing a defined termination profile and reducing the likelihood of stray strands during installation.
The Partex CEF618F-C is designed for 6 mm² single-conductor termination and features an 18 mm barrel. The conductor is stripped to the appropriate length, inserted into the ferrule and secured using a suitable ferrule crimping tool. The green insulated collar provides a convenient transition at the conductor entry, while the crimped barrel is inserted into a compatible electrical terminal.
Correct ferrule selection is essential for dependable electrical connections. The receiving terminal must accept the finished ferrule dimensions and barrel length, while the conductor type, stripping length, crimp profile and terminal tightening requirements must be checked against the relevant manufacturers' instructions. A single cord end ferrule should not be used to terminate two conductors unless that arrangement is specifically approved.
Tick the specs you need, then view products that match.
| Supply Format | Pack of 100 | |
|---|---|---|
| Device Type | Single Insulated Ferrule | |
| Conductor Size | 6 mm² | |
| Colour Code | French colour code | |
| Insulation Type | Insulated | |
| Pin Length (mm) | 18 mm | |
| Colour | Green | |
| Manufacturer | Partex | |
| Product range | Insulated Cord End Ferrules | |
| Manufacturer part number | CEF618F-C | |
| Product type | Single insulated cord end ferrule | |
| Ferrule configuration | Single conductor | |
| Nominal conductor cross-section | 6 mm² | |
| Barrel length | 18 mm | |
| Insulation colour | Green | |
| Termination method | Crimp | |
| Conductor application | Compatible flexible stranded electrical conductors | |
| Pack quantity | 100 pieces | |
| Typical application | Electrical conductor preparation and terminal block wiring | |
| HS Code | 85369010 |
The Partex CEF618F-C is a green single insulated cord end ferrule used to terminate compatible 6 mm² flexible stranded conductors before connection to suitable terminal blocks and electrical equipment. It helps contain individual conductor strands and provides a defined crimped termination.
The CEF618F-C is specified for a 6 mm² nominal conductor cross-section and features an 18 mm barrel length. The receiving electrical terminal must be compatible with the finished ferrule dimensions and barrel length.
Each pack contains 100 green insulated cord end ferrules, providing a practical quantity for control-panel assembly, electrical equipment manufacturing, cable preparation and industrial maintenance.
The green insulated collar provides a defined conductor entry point and helps create a neat transition between the cable insulation and the ferrule barrel. Ferrule colour conventions can vary, so the specified 6 mm² conductor size should be used to confirm product selection.
The 6 mm² flexible conductor is stripped to the appropriate length, inserted fully into the ferrule and secured using a compatible ferrule crimping tool. The completed crimp should be inspected before insertion into a suitable terminal block or electrical connection point, following the equipment manufacturer's installation instructions.
Partex electrical identification and termination products support professional cable preparation, industrial automation and control-panel manufacturing. The CEF618F-C green insulated cord end ferrule combines a 6 mm² conductor size, 18 mm barrel length and convenient 100-piece packaging to support electricians, machinery manufacturers and industrial maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.