Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex CEF35025F-C is a red single insulated cord end ferrule designed for crimp termination of 35 mm² stranded electrical conductors, featuring a 25 mm barrel and supplied in packs of 100.
£15.10
The Partex CEF35025F-C is a red single insulated cord end ferrule designed for terminating 35 mm² stranded electrical conductors. Featuring a 25 mm metal barrel, this ferrule provides a practical solution for preparing larger flexible cable ends before connection to compatible electrical terminals in industrial control panels, power distribution equipment and machinery installations.
The ferrule combines a tubular metal crimp barrel with a red insulating collar, helping to contain individual conductor strands and produce a neat, consistent cable termination. Its single-conductor configuration is intended for terminating one appropriately sized flexible electrical conductor, while the extended barrel length accommodates applications requiring a suitable 25 mm insertion section.
Supplied in a convenient pack of 100 pieces, the Partex CEF35025F-C is suitable for industrial electricians, electrical panel manufacturers, automation engineers and maintenance professionals working with larger conductor sizes. Its solderless crimp design supports efficient electrical assembly when installed using appropriate crimping equipment.
Larger flexible electrical conductors contain multiple individual wire strands that must remain together during termination. The Partex CEF35025F-C provides a tubular metal barrel designed to surround the prepared end of a 35 mm² conductor. When compressed using suitable ferrule crimping equipment, the barrel helps consolidate the conductor strands into a consistent termination for insertion into a compatible electrical terminal.
The 25 mm barrel length is particularly important when selecting ferrules for electrical terminals with specific insertion-depth requirements. For correct installation, the conductor should be stripped to the appropriate length, fully inserted into the ferrule and crimped using equipment suitable for 35 mm² insulated cord end ferrules. The completed crimp should be inspected, and the receiving terminal manufacturer's requirements for conductor size, ferrule compatibility, insertion depth and tightening torque must be followed.
Tick the specs you need, then view products that match.
| Colour Code | French colour code | |
|---|---|---|
| Supply Format | Pack of 100 | |
| Device Type | Single Insulated Ferrule | |
| Conductor Size | 35 mm² | |
| Insulation Type | Insulated | |
| Pin Length (mm) | 25 mm | |
| Colour | Red | |
| Manufacturer | Partex | |
| Model | CEF35025F-C | |
| Product type | Single insulated cord end ferrule | |
| Ferrule configuration | Single conductor | |
| Nominal conductor cross-section | 35 mm² | |
| Metal barrel length | 25 mm | |
| Insulation colour | Red | |
| Connection method | Crimp termination | |
| Intended conductor type | Stranded electrical conductor | |
| Installation method | Compatible ferrule crimping tool | |
| Pack quantity | 100 pieces | |
| Product category | Insulated Cord End Ferrules | |
| HS Code | 85369010 |
The Partex CEF35025F-C is a red insulated cord end ferrule designed to terminate individual 35 mm² stranded electrical conductors before connection to compatible electrical terminals.
The CEF35025F-C is designed for a nominal conductor cross-section of 35 mm².
The ferrule features a 25 mm metal barrel. The receiving electrical terminal must accommodate this barrel length and the finished crimp dimensions.
The CEF35025F-C features a red insulating collar for convenient identification during electrical installation and cable preparation.
The Partex CEF35025F-C is supplied in a pack of 100 pieces, making it suitable for electrical assembly, panel manufacturing and industrial maintenance requirements.
Both ferrules are designed for 35 mm² conductors. The CEF35025F-C has a 25 mm barrel, red insulating collar and pack quantity of 100, while the CEF35016G-K has a 16 mm barrel, beige insulating collar and pack quantity of 1,000. The appropriate model should be selected according to the receiving terminal's requirements.
No. The CEF35025F-C is a single-conductor ferrule intended for one appropriately sized conductor. Where two conductors must share a connection, a suitable twin ferrule or another approved termination arrangement should be selected according to the terminal manufacturer's instructions.
Use a ferrule crimping tool and crimping profile suitable for 35 mm² insulated cord end ferrules. The completed crimp must also be compatible with the receiving electrical terminal.
No. The CEF35025F-C is intended for solderless crimp termination using appropriate ferrule crimping equipment.
Yes. The CEF35025F-C can be used in electrical distribution and control panel assemblies where the receiving terminal is suitable for a 35 mm² conductor terminated with a 25 mm ferrule barrel.
The 25 mm barrel length determines the length of the metal ferrule section available for insertion into a terminal. The correct barrel length must be selected according to the receiving terminal's insertion-depth and connection requirements.
Partex cord end ferrules provide practical solutions for professional electrical wiring and industrial cable termination. The Partex CEF35025F-C red insulated 35 mm² ferrule combines a 25 mm barrel, single-conductor construction and a convenient pack quantity of 100, making it a useful component for industrial electricians, electrical panel manufacturers, automation engineers and maintenance professionals working with larger flexible conductors.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.