Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex CEF2518F-K is a grey single insulated cord end ferrule designed for crimp termination of 2.5 mm² stranded electrical conductors, featuring an 18 mm barrel and supplied in packs of 1000.
£18.27
The Partex CEF2518F-K is a grey single insulated cord end ferrule designed for terminating 2.5 mm² stranded electrical conductors. Featuring an 18 mm metal barrel, this ferrule provides a practical solution for preparing flexible cable ends before insertion into compatible electrical terminals in industrial control panels, distribution cabinets and electrical equipment.
The ferrule combines a tubular metal crimp barrel with a grey insulating collar, helping to keep individual conductor strands together during termination. Its single-conductor construction supports neat, consistent cable preparation, while the extended barrel length makes it suitable for applications requiring an appropriately sized terminal insertion section.
Supplied in a bulk pack of 1,000 pieces, the Partex CEF2518F-K is particularly useful for electrical panel manufacturers, automation engineers, electrical contractors and industrial maintenance teams carrying out repetitive wiring operations. Its insulated design and solderless crimp connection method support efficient, professional electrical assembly.
Flexible stranded electrical conductors contain multiple individual wire strands that can separate when inserted directly into electrical terminals. The Partex CEF2518F-K provides a tubular metal barrel that surrounds the prepared conductor end. When compressed using a suitable ferrule crimping tool, the barrel helps consolidate the strands into a uniform termination for insertion into a compatible electrical connection.
The 18 mm barrel length is an important consideration when selecting a ferrule for electrical terminals with particular insertion-depth requirements. For correct installation, the conductor should be stripped to the appropriate length, inserted fully into the ferrule and crimped using tooling suitable for 2.5 mm² insulated cord end ferrules. The completed termination should be inspected, and the receiving terminal must accommodate the barrel length and finished crimp dimensions.
Tick the specs you need, then view products that match.
| Supply Format | Pack of 1000 | |
|---|---|---|
| Device Type | Single Insulated Ferrule | |
| Conductor Size | 2.5 mm² | |
| Colour Code | French colour code | |
| Insulation Type | Insulated | |
| Pin Length (mm) | 18 mm | |
| Colour | Grey | |
| Manufacturer | Partex | |
| Model | CEF2518F-K | |
| Product type | Single insulated cord end ferrule | |
| Ferrule configuration | Single conductor | |
| Nominal conductor cross-section | 2.5 mm² | |
| Metal barrel length | 18 mm | |
| Insulation colour | Grey | |
| Connection method | Crimp termination | |
| Intended conductor type | Stranded electrical conductor | |
| Installation method | Compatible ferrule crimping tool | |
| Pack quantity | 1,000 pieces | |
| Product category | Insulated Cord End Ferrules | |
| HS Code | 85369010 |
The Partex CEF2518F-K is a grey insulated cord end ferrule designed to terminate individual 2.5 mm² stranded electrical conductors before connection to compatible electrical terminals.
The CEF2518F-K is designed for a nominal conductor cross-section of 2.5 mm².
The ferrule has an 18 mm metal barrel. The receiving electrical terminal must accommodate this insertion length and the finished crimp dimensions.
The CEF2518F-K features a grey insulating collar for convenient identification during electrical installation and cable preparation.
The Partex CEF2518F-K is supplied in a pack of 1,000 pieces, making it suitable for repetitive electrical assembly, control panel manufacturing and maintenance work.
No. The CEF2518F-K is a single-conductor ferrule intended for one appropriately sized conductor. Where two conductors must share a terminal, a correctly sized twin ferrule should be considered if permitted by the terminal manufacturer.
Use a ferrule crimping tool compatible with 2.5 mm² insulated cord end ferrules. The selected crimp profile must produce a finished termination suitable for the receiving terminal.
No. The CEF2518F-K is designed for solderless crimp termination using an appropriate ferrule crimping tool.
Yes. The CEF2518F-K is suitable for industrial control panel wiring where the conductor cross-section, 18 mm barrel length and completed crimp are compatible with the receiving terminal.
The 18 mm barrel length determines the length of the metal ferrule section available for insertion into a terminal. The correct length should be selected according to the terminal manufacturer's requirements to ensure proper conductor engagement and installation.
Partex cord end ferrules provide practical solutions for professional electrical wiring and industrial cable termination. The Partex CEF2518F-K grey insulated 2.5 mm² ferrule combines an 18 mm barrel, single-conductor construction and a bulk pack quantity of 1,000, making it a useful component for electricians, automation engineers, control panel builders and industrial maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.