Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex CEF1518F-K is a black single insulated cord end ferrule designed for crimp termination of 1.5 mm² stranded electrical conductors, featuring an 18 mm barrel and supplied in packs of 1000.
£17.40
The Partex CEF1518F-K is a black single insulated cord end ferrule designed for terminating 1.5 mm² stranded electrical conductors. Featuring an 18 mm metal barrel, it provides a practical solution for preparing flexible cable ends before insertion into compatible electrical terminals in industrial control panels, electrical cabinets and machinery wiring.
The ferrule combines a tubular metal crimp barrel with a black insulating collar to support neat and consistent conductor termination. The barrel helps contain individual wire strands during crimping, while the insulating collar provides a defined transition between the cable insulation and the ferrule. Its single-conductor configuration is intended for terminating one appropriately sized flexible wire.
Supplied in a bulk pack of 1,000 pieces, the Partex CEF1518F-K is particularly suitable for electrical panel manufacturers, automation engineers, electrical contractors and maintenance professionals carrying out repetitive wiring operations. The extended barrel and insulated construction make it a useful choice where the receiving terminal is compatible with an 18 mm ferrule termination.
Flexible stranded electrical conductors contain multiple individual wire strands that can separate when inserted directly into electrical terminals. The Partex CEF1518F-K provides a tubular metal barrel that surrounds the prepared conductor end. When crimped using a suitable ferrule tool, the barrel helps consolidate the strands into a uniform termination for insertion into a compatible electrical connection.
The 18 mm barrel length is an important consideration when selecting a ferrule for terminals with particular insertion-depth requirements. For correct installation, the conductor should be stripped to the appropriate length, inserted fully into the ferrule and crimped using a tool and crimp profile suitable for 1.5 mm² insulated cord end ferrules. The finished termination should be inspected, and the receiving terminal must accommodate the barrel length and crimped dimensions.
Tick the specs you need, then view products that match.
| Colour Code | French colour code | |
|---|---|---|
| Supply Format | Pack of 1000 | |
| Device Type | Single Insulated Ferrule | |
| Conductor Size | 1.5 mm² | |
| Insulation Type | Insulated | |
| Pin Length (mm) | 18 mm | |
| Colour | Black | |
| Manufacturer | Partex | |
| Model | CEF1518F-K | |
| Product type | Single insulated cord end ferrule | |
| Ferrule configuration | Single conductor | |
| Nominal conductor cross-section | 1.5 mm² | |
| Metal barrel length | 18 mm | |
| Insulation colour | Black | |
| Connection method | Crimp termination | |
| Intended conductor type | Stranded electrical conductor | |
| Installation method | Compatible ferrule crimping tool | |
| Pack quantity | 1,000 pieces | |
| Product category | Insulated Cord End Ferrules | |
| HS Code | 85369010 |
The Partex CEF1518F-K is a black insulated cord end ferrule designed to terminate individual 1.5 mm² stranded electrical conductors before connection to compatible electrical terminals.
The CEF1518F-K is designed for a nominal conductor cross-section of 1.5 mm².
The ferrule has an 18 mm metal barrel. The receiving electrical terminal must accommodate this insertion length and the finished crimp dimensions.
The CEF1518F-K features a black insulating collar for convenient identification during electrical installation and cable preparation.
The Partex CEF1518F-K is supplied in a pack of 1,000 pieces, making it suitable for repetitive electrical assembly, control panel manufacturing and maintenance work.
No. The CEF1518F-K is a single-conductor ferrule intended for one appropriately sized conductor. Where two conductors must share a terminal, a correctly sized twin ferrule should be considered if permitted by the terminal manufacturer.
Use a ferrule crimping tool compatible with 1.5 mm² insulated cord end ferrules. The selected crimp profile must also produce a finished termination suitable for the receiving terminal.
No. The CEF1518F-K is designed for solderless crimp termination using an appropriate ferrule crimping tool.
Yes. The CEF1518F-K is suitable for industrial control panel wiring where the conductor cross-section, 18 mm barrel length and completed crimp are compatible with the receiving terminal.
The 18 mm barrel length determines the length of the metal ferrule section available for insertion into a terminal. The correct length should be selected according to the terminal manufacturer's requirements to ensure proper conductor engagement and installation.
Partex cord end ferrules provide practical solutions for professional electrical wiring and industrial cable termination. The Partex CEF1518F-K black insulated 1.5 mm² ferrule combines an 18 mm barrel, single-conductor construction and a bulk pack quantity of 1,000, making it a useful component for electricians, automation engineers, control panel builders and industrial maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.