Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex CEF1518F-C black single insulated cord end ferrules for 1.5 mm² flexible stranded conductors with an 18 mm barrel length, supplied in a pack of 100 for professional electrical conductor termination.
£1.95
The Partex CEF1518F-C is a single insulated cord end ferrule designed for terminating flexible stranded electrical conductors in industrial control panels, electrical distribution equipment and automation systems. Featuring a 1.5 mm² nominal conductor cross-section, 18 mm barrel length and black insulated collar, this ferrule provides a practical solution for preparing electrical conductors for compatible terminal connections.
As part of the Partex insulated cord end ferrule range, the CEF1518F-C helps contain individual wire strands during termination. Its metal barrel is designed to be crimped onto a correctly prepared conductor, while the insulated collar provides a defined conductor entry point and a neat transition between the cable insulation and the terminated end. The extended 18 mm barrel is particularly useful where the receiving terminal is designed to accommodate this ferrule length.
Supplied in a convenient pack of 100 ferrules, the Partex CEF1518F-C is suitable for electricians, control-panel builders, machinery manufacturers and industrial maintenance engineers requiring consistent cable preparation and professional conductor termination.
Flexible stranded conductors are commonly used in industrial control panels, motor control systems, PLC cabinets and automation equipment. When these conductors are connected to suitable electrical terminals, a correctly selected cord end ferrule helps maintain the conductor strands together, providing a defined termination profile and reducing the likelihood of stray strands during installation.
The Partex CEF1518F-C is specified for 1.5 mm² single-conductor termination and features an 18 mm barrel. During installation, the conductor is stripped to the appropriate length, inserted fully into the ferrule and secured using a compatible ferrule crimping tool. The black insulated collar provides a defined transition at the conductor entry, while the crimped barrel can be inserted into a suitable electrical terminal.
The 18 mm barrel length is an important selection consideration, particularly when working with terminal blocks or equipment connections with specific insertion-depth requirements. The receiving terminal must accept the finished ferrule dimensions, and the conductor construction, stripping length, crimp profile and terminal tightening requirements should be checked against the relevant manufacturers' instructions. A single cord end ferrule should not be used to terminate two conductors unless that arrangement is specifically approved.
Tick the specs you need, then view products that match.
| Colour Code | French colour code | |
|---|---|---|
| Supply Format | Pack of 100 | |
| Device Type | Single Insulated Ferrule | |
| Conductor Size | 1.5 mm² | |
| Insulation Type | Insulated | |
| Pin Length (mm) | 18 mm | |
| Colour | Black | |
| Manufacturer | Partex | |
| Product range | Insulated Cord End Ferrules | |
| Manufacturer part number | CEF1518F-C | |
| Product type | Single insulated cord end ferrule | |
| Ferrule configuration | Single conductor | |
| Nominal conductor cross-section | 1.5 mm² | |
| Barrel length | 18 mm | |
| Insulation colour | Black | |
| Termination method | Crimp | |
| Conductor application | Compatible flexible stranded electrical conductors | |
| Pack quantity | 100 pieces | |
| Typical application | Electrical conductor preparation and terminal block wiring | |
| HS Code | 85369010 |
The Partex CEF1518F-C is a black single insulated cord end ferrule used to terminate compatible 1.5 mm² flexible stranded conductors before connection to suitable terminal blocks and electrical equipment. It helps contain individual wire strands and provides a defined crimped termination.
The CEF1518F-C is specified for a 1.5 mm² nominal conductor cross-section and features an 18 mm barrel length. The receiving electrical terminal must be compatible with the finished ferrule dimensions and barrel length.
Each pack contains 100 black insulated cord end ferrules, providing a convenient quantity for control-panel assembly, electrical equipment manufacturing, cable preparation and industrial maintenance.
The black insulated collar provides a defined conductor entry point and helps create a neat transition between the cable insulation and the ferrule barrel. Ferrule colour conventions can vary, so the specified 1.5 mm² conductor size should be used to confirm correct product selection.
The 1.5 mm² flexible conductor is stripped to the appropriate length, inserted fully into the ferrule and secured using a compatible ferrule crimping tool. The completed crimp should be inspected before insertion into a suitable terminal block or electrical connection point, following the equipment manufacturer's installation instructions.
Partex electrical identification and termination products support professional cable preparation, industrial automation and control-panel manufacturing. The CEF1518F-C black insulated cord end ferrule combines a 1.5 mm² conductor size, 18 mm barrel length and convenient 100-piece packaging to support electricians, machinery manufacturers and industrial maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.