Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CEF02508F-K Partex single insulated cord end ferrule, 0.25mm², 8mm barrel, Violet, pack of 1000
Partex CEF02508F-K violet single insulated cord end ferrules for 0.25 mm² fine flexible stranded conductors with an 8 mm barrel length, supplied in a pack of 1000 for professional electrical conductor termination.
£12.47
Why Choose the Partex CEF02508F-K Violet Insulated Cord End Ferrule?
The Partex CEF02508F-K is a single insulated cord end ferrule designed for terminating fine flexible stranded electrical conductors in industrial control panels, instrumentation equipment and automation systems. Featuring a 0.25 mm² nominal conductor cross-section, 8 mm barrel length and violet insulated collar, this ferrule provides a practical solution for preparing small electrical conductors for compatible terminal connections.
As part of the Partex insulated cord end ferrule range, the CEF02508F-K helps contain individual wire strands during termination. Its metal barrel is designed to be crimped onto a correctly prepared conductor, while the insulated collar provides a defined conductor entry point and a neat transition between the cable insulation and the terminated end. The 8 mm barrel offers a compact termination length for electrical terminals designed to accommodate this ferrule size.
Supplied in a convenient pack of 1,000 ferrules, the Partex CEF02508F-K is particularly suitable for control-panel manufacturers, instrumentation engineers, OEM equipment builders and industrial maintenance teams requiring consistent preparation of fine electrical conductors across repeated wiring operations.
Key Advantages
- 0.25 mm² conductor size for compatible fine flexible stranded electrical wiring.
- 8 mm barrel length for terminal connections designed to accept this ferrule length.
- Violet insulated collar provides a convenient visual reference during conductor preparation.
- Pack of 1,000 ferrules supports high-volume electrical assembly and production work.
- Helps contain individual conductor strands during insertion into compatible electrical terminals.
- Crimp termination supports consistent conductor preparation when correctly installed.
- Reduces the likelihood of loose or stray strands at the termination point.
- Compact ferrule configuration suitable for fine conductor terminations.
- Provides a neat and organised finish to electrical wiring assemblies.
- Suitable for instrumentation, signalling, industrial automation and control-panel wiring.
- Convenient for repeat cable preparation and electrical equipment manufacturing.
- Partex manufacturer identification supports accurate product selection and repeat purchasing.
Key Features
- Partex CEF02508F-K single insulated cord end ferrule.
- 0.25 mm² nominal conductor cross-section.
- 8 mm barrel length.
- Violet insulation colour.
- 1,000 ferrules per pack.
- Single-conductor ferrule configuration.
- Crimp-style electrical conductor termination.
- Insulated collar at the conductor entry.
- Metal ferrule barrel for containing fine stranded conductor ends.
- Designed for compatible flexible stranded electrical conductors.
- Suitable for terminal blocks and electrical connection points designed to accept ferrules.
- Useful for instrumentation wiring, control-panel assembly and cable preparation.
Precision Conductor Termination for Instrumentation and Industrial Automation
Fine flexible stranded conductors are commonly used in instrumentation, sensor connections, signalling circuits and industrial automation equipment. When these conductors are connected to suitable electrical terminals, a correctly selected cord end ferrule helps keep individual strands together, providing a defined termination profile and reducing the likelihood of stray strands during installation.
The Partex CEF02508F-K is specified for 0.25 mm² single-conductor termination and features an 8 mm barrel. During installation, the conductor is stripped to the appropriate length, inserted fully into the ferrule and secured using a crimping tool suitable for fine conductor ferrules. The violet insulated collar provides a defined transition at the conductor entry, while the crimped barrel can be inserted into a compatible electrical terminal.
Correct component selection is particularly important when working with small conductor cross-sections. The receiving terminal must accept the finished ferrule dimensions and conductor size, while the crimping tool must support the specified 0.25 mm² cross-section. Conductor construction, stripping length, crimp profile and terminal connection requirements should always be checked against the relevant manufacturers' instructions. A single cord end ferrule should not be used to terminate two conductors unless that arrangement is specifically approved.
Typical Applications
- Industrial instrumentation and signal wiring.
- PLC input and output connections where compatible.
- Electrical control-panel manufacturing and assembly.
- Sensor and measurement equipment wiring.
- Industrial automation control circuits.
- Low-current electrical signalling applications.
- OEM electrical and electronic equipment manufacturing.
- Compatible terminal block connections for fine stranded conductors.
- Workshop cable preparation and wiring harness assembly.
- Industrial equipment maintenance and refurbishment.
- Electrical cabinets containing fine control and instrumentation wiring.
- High-volume preparation of 0.25 mm² conductor terminations.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour Code | French colour code | |
|---|---|---|
| Supply Format | Pack of 1000 | |
| Device Type | Single Insulated Ferrule | |
| Conductor Size | 0.25 mm² | |
| Insulation Type | Insulated | |
| Pin Length (mm) | 8 mm | |
| Colour | Violet | |
| Manufacturer | Partex | |
| Product range | Insulated Cord End Ferrules | |
| Manufacturer part number | CEF02508F-K | |
| Product type | Single insulated cord end ferrule | |
| Ferrule configuration | Single conductor | |
| Nominal conductor cross-section | 0.25 mm² | |
| Barrel length | 8 mm | |
| Insulation colour | Violet | |
| Termination method | Crimp | |
| Conductor application | Compatible fine flexible stranded electrical conductors | |
| Pack quantity | 1,000 pieces | |
| Typical application | Fine conductor preparation and compatible terminal block wiring | |
| HS Code | 85369010 |
Frequently Asked Questions
What is the Partex CEF02508F-K used for?
The Partex CEF02508F-K is a violet single insulated cord end ferrule designed to terminate compatible 0.25 mm² fine flexible stranded conductors before connection to suitable electrical terminals. It helps contain individual wire strands and provides a defined crimped termination for instrumentation, control-panel and automation wiring.
What conductor size and barrel length does the Partex CEF02508F-K have?
The CEF02508F-K is specified for a 0.25 mm² nominal conductor cross-section and features an 8 mm barrel length. The receiving electrical terminal must be compatible with the finished ferrule dimensions, conductor size and insertion depth.
How many Partex CEF02508F-K ferrules are supplied in one pack?
Each pack contains 1,000 violet insulated cord end ferrules, making it suitable for control-panel production, instrumentation wiring, cable preparation and high-volume electrical assembly.
What is the purpose of the violet insulated collar on the CEF02508F-K?
The violet insulated collar provides a defined conductor entry point and helps create a neat transition between the cable insulation and the ferrule barrel. Ferrule colour conventions can vary, so the specified 0.25 mm² conductor size should be used when selecting the correct product.
How is the Partex CEF02508F-K cord end ferrule installed?
The 0.25 mm² flexible conductor is stripped to the appropriate length, inserted fully into the ferrule and secured using a compatible fine-conductor ferrule crimping tool. The completed crimp should be inspected before insertion into a suitable electrical terminal, following the relevant manufacturer's installation instructions.
Trusted by Electrical Engineers and Industrial Panel Builders Worldwide
Partex electrical identification and termination products support professional cable preparation, instrumentation wiring and industrial automation. The CEF02508F-K violet insulated cord end ferrule combines a 0.25 mm² conductor size, 8 mm barrel length and convenient 1,000-piece packaging to support control-panel manufacturers, instrumentation engineers, OEM equipment builders and industrial maintenance professionals.
