Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CDL701001R1002 ABB UNICLIC CP 2 Connector 1.5-2.5 mm² System pro E Energy
ABB UNICLIC CP 2 electrical connector for 1.5–2.5 mm² conductors, designed for compatible ABB System pro E energy low-voltage electrical distribution and panel assembly applications.
£5.19
Why Choose the ABB UNICLIC CP 2 Connector?
The ABB UNICLIC CP 2 is a practical electrical connection accessory for 1.5–2.5 mm² conductors, designed for use within compatible ABB low-voltage electrical distribution systems. As part of the ABB System pro E energy product range, this connector supports organised electrical connections in distribution assemblies where reliable conductor termination and compatibility with the installed equipment are essential.
The UNICLIC CP 2 is designed to provide a convenient connection solution for conductors within its specified cross-sectional range. Its dedicated connector format supports professional electrical assembly work, helping installers establish secure connections when used with compatible ABB components and installed according to the manufacturer's instructions.
With a specified conductor cross-section of 1.5–2.5 mm² and ABB manufacturer order code 2CDL701001R1002, the UNICLIC CP 2 is suitable for electrical distribution projects requiring a compatible connector for smaller conductor sizes. Its inclusion in the System pro E energy range makes it relevant to professional switchboard assembly, electrical panel construction and distribution system maintenance.
Key Advantages
- Purpose-designed electrical connector for 1.5–2.5 mm² conductors.
- Part of the established ABB System pro E energy range.
- Supports organised conductor connections in compatible electrical distribution assemblies.
- Dedicated connector design helps simplify the selection of connection accessories.
- Suitable for professional electrical panel assembly and maintenance applications.
- Supports reliable electrical connections when correctly installed within its specified operating limits.
- Useful for distribution equipment installations requiring smaller conductor cross-sections.
- ABB manufacturer identification supports accurate replacement and component procurement.
- Designed for integration with compatible ABB electrical distribution equipment.
Key Features
- ABB UNICLIC connector system.
- UNICLIC CP 2 model designation.
- 1.5–2.5 mm² conductor cross-section range.
- Electrical connection accessory for compatible low-voltage distribution equipment.
- Part of the System pro E energy product family.
- Designed for professional electrical installation and assembly work.
- Supports conductor termination within the specified size range.
- Suitable for compatible electrical distribution and switchboard applications.
- Manufacturer order code 2CDL701001R1002 for accurate product identification.
- Dedicated accessory format for use with the appropriate ABB connection arrangement.
Reliable Conductor Connections for Electrical Distribution Systems
Electrical connectors are essential components in low-voltage distribution assemblies, providing the connection points required for electrical continuity between conductors and compatible equipment. Correct connector selection is important because conductor cross-section, connection design and installation conditions all influence the suitability of an electrical termination.
The ABB UNICLIC CP 2 is specified for conductors with a cross-sectional area of 1.5–2.5 mm². Selecting a connector appropriate for the conductor size helps installers establish the intended connection arrangement and avoid using accessories outside their specified conductor range.
As a component within the ABB System pro E energy range, the UNICLIC CP 2 supports electrical distribution assembly work where compatible components and organised wiring arrangements are important. Its dedicated product identification allows installers and maintenance personnel to specify the appropriate ABB connector when constructing, extending or servicing compatible electrical distribution equipment.
Correct installation is essential for dependable operation. Conductors must be prepared and connected according to the applicable ABB instructions, including any requirements for conductor type, stripping length, insertion method and connection verification. Electrical loading and operating conditions must remain within the ratings of the complete connection system.
The UNICLIC CP 2 is a connection accessory rather than an electrical protective device. It does not independently provide overload, short-circuit or residual current protection. Suitable protective devices and isolation arrangements must be incorporated into the wider electrical installation as required.
Typical Applications
- Compatible ABB System pro E energy electrical distribution assemblies.
- Low-voltage switchboard construction and assembly.
- Electrical panel wiring and conductor connection.
- Distribution equipment installations using 1.5–2.5 mm² conductors.
- Professional electrical installation and maintenance work.
- Replacement of compatible ABB UNICLIC connection accessories.
- Electrical distribution system upgrades and modifications.
- Commercial and industrial electrical panel assembly.
- Organised conductor termination within compatible electrical equipment.
- Electrical distribution projects requiring manufacturer-specific connection components.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Series | System pro E energy | |
| Product family | UNICLIC | |
| ABB order code | 2CDL701001R1002 | |
| Product type | Electrical connector | |
| Connector designation | CP 2 | |
| Conductor cross-section | 1.5–2.5 mm² | |
| Application category | Low-voltage electrical distribution accessories | |
| Connection function | Electrical conductor connection | |
| Compatibility | Suitable ABB UNICLIC connection arrangements | |
| Installation environment | Compatible electrical distribution assemblies | |
| Product group | System pro E energy | |
| Application | Electrical panel assembly and conductor connection |
Frequently Asked Questions
What is the ABB UNICLIC CP 2 used for?
The ABB UNICLIC CP 2 is an electrical connector designed for use with 1.5–2.5 mm² conductors in compatible ABB electrical distribution equipment. It supports conductor connection and professional electrical assembly applications.
What conductor sizes does the ABB UNICLIC CP 2 support?
The UNICLIC CP 2 is specified for a conductor cross-section range of 1.5–2.5 mm². Conductors must also meet the applicable ABB requirements for the complete connection arrangement.
Which ABB product range does the UNICLIC CP 2 belong to?
The UNICLIC CP 2 belongs to the ABB System pro E energy product group, which includes components and accessories for compatible low-voltage electrical distribution systems.
What is the ABB order code for the UNICLIC CP 2?
The ABB manufacturer order code is 2CDL701001R1002, and the product model designation is UNICLIC CP 2.
Can the ABB UNICLIC CP 2 be used in electrical distribution panels?
Yes. The UNICLIC CP 2 is an electrical connection accessory intended for compatible ABB distribution equipment. The connector must be matched to the relevant connection system, conductor type and installation requirements.
Is the ABB UNICLIC CP 2 suitable for 2.5 mm² conductors?
Yes. The specified conductor cross-section range is 1.5–2.5 mm², which includes 2.5 mm² conductors, subject to the manufacturer's requirements for the supported conductor construction and connection method.
Does the ABB UNICLIC CP 2 provide circuit protection?
No. The UNICLIC CP 2 is an electrical connection accessory and does not independently provide overload, short-circuit or residual current protection. Appropriate protective devices must be provided as part of the complete electrical installation.
Can the ABB UNICLIC CP 2 be used as a replacement connector?
The UNICLIC CP 2 can be selected as a replacement where the existing equipment requires the same ABB connector designation and order code. Compatibility with the installed connection arrangement should be established before replacement.
Who should install the ABB UNICLIC CP 2?
The connector should be installed by a competent electrical professional familiar with low-voltage distribution equipment and conductor termination requirements. Installation must follow the applicable ABB instructions and relevant electrical safety requirements.
Trusted by Electrical Panel Builders and Installation Professionals
ABB System pro E energy connection accessories support electrical panel builders, switchboard assemblers and installation professionals by providing dedicated components for compatible electrical distribution systems, helping achieve organised conductor connections and dependable equipment assembly.
