ERWT1-0NBEIGE IMO Test/Disconnect Terminal 6mm, 400V, 6.3A, Beige

Why Choose the IMO ERWT1-0NBEIGE 6 mm² Test/Disconnect Terminal?

The IMO ERWT1-0NBEIGE is a 6 mm² screw-clamp test and disconnect terminal block designed for industrial control, measurement and distribution circuits where convenient circuit separation is required for testing, commissioning or maintenance. It provides a dedicated disconnect point while allowing the installed conductors to remain securely terminated.

This no-socket version is designed for mounting on 35 mm G rail and DIN rail, including the MR35 × 7.5 mm format. The terminal is only 8 mm wide, allowing test and disconnect functions to be incorporated into compact industrial terminal strips without excessive use of rail space.

Manufacturer data specifies a 400 V, 41 A, 6 mm² rating to EN 60947-7-1 and a 300 V, 50 A cRUus rating for AWG 20–8 conductors. The terminal accepts solid and stranded conductors from 0.2 to 10 mm², providing considerable flexibility for industrial test, measurement and control-panel wiring.

Key Advantages

• Test and disconnect functionality provides an accessible circuit separation point.
• Allows testing and maintenance without repeatedly removing field conductors.
• 6 mm² nominal cross-section for industrial control and measurement circuits.
• 400 V, 41 A EN 60947-7-1 rating.
• Wide conductor capacity from 0.2 to 10 mm².
• Compact 8 mm width helps conserve DIN rail space.
• Suitable for both 35 mm G rail and DIN rail.
• Compatible with dedicated test, cross-connection and marking accessories.

Key Features

• IMO ERWT Series test/disconnect terminal.
• 6 mm² test and disconnect terminal block.
• No test socket configuration.
• Screw-clamp conductor termination.
• 400 V, 41 A EN 60947-7-1 rating.
• 300 V, 50 A cRUus rating.
• Solid conductor range: 0.2 to 10 mm².
• Stranded conductor range: 0.2 to 10 mm².
• Twin-ferrule conductor range: 0.5 to 4 mm².
• AWG conductor range: AWG 24–8.
• Insulation stripping length: 10 to 12 mm.
• Tightening torque: 0.8 to 1.2 Nm.
• Recommended screwdriver: 0.8 × 4.0 mm.
• 8 mm terminal width.
• IP20 protection classification.
• Beige terminal body.

Reliable Test and Disconnect Connections for Industrial Circuits

Test/disconnect terminals provide accessible separation points within electrical circuits, allowing engineers to isolate sections of wiring during commissioning, measurement, troubleshooting and maintenance. The ERWT1-0NBEIGE combines this functionality with conventional screw-clamp conductor termination, helping ensure the connected field wiring remains mechanically secure during routine testing procedures.

Its 6 mm² nominal cross-section, 41 A EN-rated current capacity and 0.2 to 10 mm² conductor range make the ERWT1-0NBEIGE suitable for a broad range of industrial applications. The no-socket configuration can be combined with appropriate IMO accessories when test points, cross-connections or circuit identification are required within the terminal assembly.

Typical Applications

• Industrial control panels.
• Measurement and test circuits.
• Current and voltage monitoring circuits.
• Protection and control systems.
• PLC and automation panels.
• Industrial switchgear assemblies.
• Commissioning and diagnostic connections.
• Circuits requiring accessible maintenance isolation.