Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2202-1205 Wago 2-conductor through terminal block;with push-button;2.5 mm²;black
WAGO 2202-1205 is a black TOPJOB S 2-conductor 2.5 mm² through terminal block with push-button operation, Push-in CAGE CLAMP technology, an 800 V IEC rated voltage and a 24 A IEC rated current.
£0.533
Why Choose the WAGO 2202-1205 2-Conductor Through Terminal Block?
The WAGO 2202-1205 is a compact 2-conductor through terminal block with push-button operation, designed for reliable through-wiring and potential distribution in industrial control panels, machinery and building installations. Part of the WAGO TOPJOB® S 2202 Series, this black terminal combines a 2.5 mm² nominal cross-section with Push-in CAGE CLAMP® technology for fast, secure and maintenance-friendly conductor termination.
The terminal provides two connection points on one electrical potential and uses front-entry wiring for convenient installation in densely populated control cabinets. Its integrated push-buttons provide intuitive opening of the spring clamp, while suitable solid and fine-stranded conductors with ferrules can be connected directly using the push-in termination method. An integrated test port also provides convenient access for electrical testing and commissioning.
Designed for DIN-35 × 15 and DIN-35 × 7.5 mm rails, the WAGO 2202-1205 has an IEC rated voltage of 800 V and rated current of 24 A, with the 2202 Series supporting up to 32 A depending on the applicable conductor and approval conditions. At only 5.2 mm wide, it provides an efficient solution where reliable connectivity and high terminal density are required.
Key Advantages
- Compact 2-conductor through terminal block for through-wiring and potential distribution.
- Push-button operation provides simple and intuitive conductor connection and removal.
- Push-in CAGE CLAMP® technology enables direct insertion of suitable conductors.
- Only 5.2 mm wide, helping maximise terminal density inside control cabinets.
- Integrated test port plus side and centre marking supports commissioning and circuit identification.
- Suitable for DIN-35 × 15 and DIN-35 × 7.5 mm rails and specific Ex e II applications.
Key Features
- WAGO TOPJOB® S 2202 Series terminal block.
- 2-conductor / 2-connection-point configuration.
- 2.5 mm² nominal cross-section.
- Push-in CAGE CLAMP® spring-pressure connection.
- Push-button actuation for straightforward wiring.
- 800 V IEC rated voltage.
- 24 A IEC rated current.
- Black PA66 insulating housing with front-entry wiring.
Fast and Reliable Push-Button Terminal Wiring
Through terminal blocks provide a straightforward method of joining two conductors at the same electrical potential. The WAGO 2202-1205 uses Push-in CAGE CLAMP® spring-pressure technology, eliminating the conventional screw connection and providing consistent conductor contact without routine screw-terminal retightening.
Push-button actuation makes the clamping point easy to operate when connecting or removing conductors, while suitable conductors can be pushed directly into the terminal without first operating the push-button. Combined with its slim 5.2 mm width, test facility and marking positions, this makes the 2202-1205 particularly useful for high-density control panel wiring and organised DIN-rail terminal assemblies.
Typical Applications
- Industrial control cabinets and automation panels.
- Through-wiring and potential distribution circuits.
- Machine building and factory automation equipment.
- Switchgear and low-voltage distribution assemblies.
- Building automation and electrical installations.
- High-density DIN-rail terminal block assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Voltage | 800 V | |
|---|---|---|
| Current | 24 A | |
| Number of Connection Points | 2 | |
| Product Series | WAGO TOPJOB S | |
| Connection | Push-in | |
| Terminal Type | Feed-through | |
| Conductor Size | 2.5 mm² | |
| Number of Levels | 1 | |
| Colour | Black | |
| HS Code | 85369010 | |
| Country of Manufacture | Germany | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2202 | |
| Model | 2202-1205 | |
| Manufacturer part number | 2202-1205 | |
| Product type | 2-conductor through terminal block | |
| Terminal type | Through / feed-through terminal | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation type | Push-button | |
| Connectable conductor material | Copper | |
| Nominal cross-section | 2.5 mm² | |
| Solid conductor range | 0.25–4 mm² | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Fine-stranded conductor range | 0.25–4 mm² | |
| Fine-stranded conductor with insulated ferrule | 1–2.5 mm² | |
| Fine-stranded conductor with ferrule, direct push-in | 1–2.5 mm² | |
| Conductor range | 22–12 AWG | |
| Strip length | 10–12 mm | |
| Rated voltage (IEC) | 800 V | |
| Rated current (IEC) | 24 A | |
| Rated impulse voltage | 8 kV | |
| Pollution degree | 3 | |
| Total connection points | 2 | |
| Total potentials | 1 | |
| Number of levels | 1 | |
| Number of jumper slots | 2 | |
| Wiring direction | Front-entry wiring | |
| Test facility | Integrated test port | |
| Marking | Side and centre marking | |
| Colour | Black | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability class | UL 94 V0 | |
| Width | 5.2 mm | |
| Height from upper edge of DIN rail | 32.9 mm | |
| Depth | 48.5 mm | |
| Mounting type | DIN-35 rail | |
| Compatible DIN rails | 35 × 15 mm and 35 × 7.5 mm | |
| Design | Horizontal | |
| Weight | approx. 5.4 g | |
| Country of origin | Germany |
Frequently Asked Questions
What is the WAGO 2202-1205 used for?
The WAGO 2202-1205 is a 2-conductor through terminal block used to connect two conductors at the same electrical potential for through-wiring and potential distribution in control panels, machinery and electrical installations.
What conductor sizes can the WAGO 2202-1205 accept?
The terminal has a nominal cross-section of 2.5 mm² and accepts solid and fine-stranded copper conductors from 0.25 to 4 mm², depending on conductor type and termination method.
What are the electrical ratings of the WAGO 2202-1205?
The WAGO 2202-1205 has an IEC rated voltage of 800 V, a rated current of 24 A, a rated impulse voltage of 8 kV and pollution degree 3.
How are conductors connected to the WAGO 2202-1205?
The terminal uses Push-in CAGE CLAMP® technology with push-button actuation. The push-button opens the spring clamp for convenient conductor insertion or removal, while suitable solid and ferruled conductors can be inserted directly using the push-in method.
Which DIN rails are compatible with the WAGO 2202-1205?
The WAGO 2202-1205 is designed for mounting on standard DIN-35 × 15 mm and DIN-35 × 7.5 mm rails, making it suitable for standard industrial control cabinet and distribution panel assemblies.
Trusted WAGO Connection Technology
WAGO TOPJOB® S terminal blocks combine compact dimensions, Push-in CAGE CLAMP® spring-pressure technology and installer-friendly push-button operation to provide dependable and maintainable connections for industrial automation, machinery and electrical distribution systems.
