Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.71
The WAGO 2006-1681/1000-414 is a 2-conductor fuse terminal block for automotive blade-style fuses, designed for reliable fused connections in industrial control panels, automation systems and electrical distribution assemblies. Part of the WAGO TOPJOB® S 2006 series, this grey terminal block combines Push-in CAGE CLAMP® connection technology with integrated 48 V LED blown-fuse indication and a convenient test facility.
Designed for efficient installation and maintenance, the WAGO 2006-1681/1000-414 accepts standard automotive blade-style fuses measuring 19.1 × 5.1 × 18.5 mm. The integrated LED provides visual indication when a fuse has operated, subject to the circuit conditions, while the test option supports electrical checking during commissioning and troubleshooting.
With a 6 mm² nominal conductor cross-section, 48 V LED indication and a 30 A maximum current rating under specified conditions, this terminal block is particularly suited to 48 V fused distribution circuits. Its compact 7.5 mm width and standard DIN rail mounting make it suitable for space-efficient electrical panel construction.
The WAGO 2006-1681/1000-414 combines a standard automotive blade-fuse receptacle with Push-in CAGE CLAMP® spring pressure connections. This allows industrial panel builders to incorporate readily available blade-style fuses into modular DIN rail terminal assemblies while benefiting from secure conductor termination and organised wiring.
Its 48 V blown-fuse LED indicator helps identify a fuse that has operated when the circuit provides the necessary indication voltage. The indicator has a specified power consumption of 4.8 mA, which should be considered when connecting sensitive loads or electronic control equipment. The integrated test option also supports inspection and fault diagnosis.
Although the terminal block has a 500 V nominal insulation rating, its actual operating voltage is limited by the fitted fuse and integrated indication circuit. The 48 V rating applies to this particular LED-equipped version. For automotive blade-style fuses, WAGO also specifies that appropriate protection against accidental contact must be observed at voltages of 42 V and above.
The installed fuse must be selected according to the circuit's voltage, current, breaking capacity and protection requirements. Fuse insertion, removal and replacement should be performed only under appropriate electrical safety procedures.
Tick the specs you need, then view products that match.
| Current | 25 A | |
|---|---|---|
| Voltage | 500 V | |
| Terminal Type | Fuse | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Type of fuse holder | Pluggable | |
| Type of fuse insert | Blade fuse | |
| Connectable conductor cross section fine-strand with cable end sleeve | 1.5 – 6 mm² | |
| Height | 96.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 25 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 10 mm² | |
| Width | 7.5 mm | |
| Rated voltage | 500 V | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Number of levels | 1 | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Closing plate required | Yes | |
| Connectable conductor cross section multi-wired | 0.5 – 6 mm² | |
| Connectable conductor cross section solid-core | 1 – 10 mm² | |
| Depth | 32.9 mm | |
| Supply voltage for defect-indication | 48 – 48 V | |
| Voltage type for defect indication | AC | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Type of indication element for defect indication | LED | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2006 | |
| Model | 2006-1681/1000-414 | |
| Product type | 2-conductor fuse terminal block | |
| Fuse receptacle | Plug-in | |
| Fuse type | Standard automotive blade-style fuse | |
| Fuse dimensions | 19.1 × 5.1 × 18.5 mm | |
| Blown-fuse indication | Integrated LED | |
| Indicator operating voltage | 48 V | |
| LED power consumption | 4.8 mA | |
| Test facility | Yes | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation | Push-in / operating tool | |
| Number of conductor connections | 2 | |
| Number of jumper slots | 2 | |
| Nominal cross-section | 6 mm² | |
| Solid conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–6 mm² | |
| Solid conductor push-in termination | 2.5–10 mm² | |
| Fine-stranded conductor with ferrule, push-in termination | 2.5–6 mm² | |
| Conductor range | 20–8 AWG | |
| Conductor material | Copper | |
| Strip length | 13–15 mm | |
| Nominal insulation voltage (IEC) | 500 V | |
| Rated current (IEC) | 25 A | |
| Maximum conductor current rating | 30 A | |
| Rated impulse withstand voltage | 8 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL) | 48 V | |
| Rated current (UL) | 30 A | |
| Rated voltage (CSA) | 48 V | |
| Rated current (CSA) | 30 A | |
| Applicable standard | IEC/EN 60947-7-3 | |
| Connection direction | Front-entry wiring | |
| Mounting type | DIN 35 rail | |
| Compatible rail profiles | 35 × 7.5 mm and 35 × 15 mm | |
| Overall depth | 96.3 mm | |
| Height from upper edge of DIN rail | 32.9 mm | |
| Housing colour | Grey | |
| Insulation material | Polyamide (PA66) | |
| Flammability rating | UL 94 V-0 | |
| Marking positions | Centre and side | |
| Weight | Approximately 17.5 g | |
| Standard packaging unit | 25 pieces | |
| GTIN / EAN | 4050821437802 |
The WAGO 2006-1681/1000-414 is a two-conductor fuse terminal block designed for automotive blade-style fuses in industrial electrical panels. It provides a fused connection, a test facility and integrated 48 V LED blown-fuse indication.
It accepts a standard automotive blade-style plug-in fuse measuring approximately 19.1 × 5.1 × 18.5 mm. The fuse must be selected with suitable electrical ratings for the protected circuit.
This version features 48 V LED blown-fuse indication and has a 48 V UL rated voltage. Its IEC nominal insulation voltage is 500 V, but this insulation rating does not override the operating limits of the fuse and LED indication circuit.
The terminal block has a 25 A IEC rated current and a maximum conductor current rating of 30 A under specified conditions. Its UL rated current is 30 A. The permissible circuit current must also account for the installed fuse and operating conditions.
When the installed fuse opens and sufficient voltage is present across it, the integrated 48 V LED indicator can illuminate to identify the affected circuit. The LED has a specified power consumption of 4.8 mA, which should be considered in circuit design.
WAGO TOPJOB® S fuse terminal blocks provide practical solutions for secure conductor termination and fused power distribution. The WAGO 2006-1681/1000-414 combines automotive blade-fuse compatibility, Push-in CAGE CLAMP® technology, a test facility and 48 V LED fault indication to support efficient electrical panel construction, troubleshooting and maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.