Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.71
The WAGO 2006-1681/1000-413 is a high-quality 2-conductor fuse terminal block for automotive blade-style fuses, designed to provide reliable circuit protection and convenient fault identification in industrial control panels and electrical distribution systems. As part of the established WAGO TOPJOB® S 2006 series, this DIN rail-mounted terminal block combines secure conductor termination, a fuse holder, an integrated test option and LED blown fuse indication in a compact design.
Featuring WAGO's proven Push-in CAGE CLAMP® connection technology, the 2006-1681/1000-413 provides secure spring-pressure conductor connections while simplifying installation and maintenance. Its integrated fuse receptacle accommodates compatible automotive blade-style fuses, while the built-in 24 V LED blown fuse indicator helps maintenance engineers identify an operated fuse under suitable circuit conditions.
With a 6 mm² nominal conductor cross-section, a 25 A rated current under the specified IEC conditions and a compact 7.5 mm terminal width, the WAGO 2006-1681/1000-413 is suitable for appropriately designed fused control and distribution circuits. Its grey polyamide housing and compatibility with standard 35 mm DIN rails make it a practical solution for industrial automation, machinery control and electrical cabinet installations.
Fuse terminal blocks combine conductor termination and fuse accommodation within a single DIN rail-mounted component. When a correctly selected fuse is installed, the fuse provides overcurrent protection for the connected circuit, helping protect wiring and electrical equipment against excessive current and short-circuit conditions.
The WAGO 2006-1681/1000-413 incorporates a holder for compatible automotive blade-style fuses and an integrated 24 V LED blown fuse indicator. When the fuse operates and the electrical conditions required by the indicator are present, the LED provides a visual signal that helps maintenance engineers identify the affected circuit.
The integrated test option supports electrical measurements and troubleshooting with suitable test equipment. This is particularly useful in control cabinets containing multiple fused circuits, where accessible test facilities can help reduce diagnostic time and simplify maintenance procedures.
The terminal block uses Push-in CAGE CLAMP® technology, which maintains spring pressure on the connected conductor to provide reliable electrical contact. Suitable solid conductors and correctly prepared fine-stranded conductors can be connected within the specified conductor ranges, with direct push-in termination available for designated conductor types and sizes.
Its compact 7.5 mm width allows the terminal block to be incorporated into dense DIN rail assemblies, while its grey PA66 insulating housing provides electrical insulation and mechanical support. Compatibility with standard 35 mm DIN rails makes it suitable for new panel construction and the expansion of existing electrical installations.
The terminal block's electrical ratings must be interpreted according to the applicable IEC and approval conditions. The 25 A IEC rating applies under the specified rating conditions, while a separate 30 A rating is listed for applicable conditions. The integrated LED indication is intended for a 24 V application, so the complete circuit voltage, fuse rating and installation requirements must be checked before use.
Unlike a standard fuse terminal block without visual monitoring, the WAGO 2006-1681/1000-413 combines blade fuse protection, electrical testing and LED fault indication in one compact component. This makes it a practical option for industrial automation engineers and panel builders who require convenient fault identification alongside organised fused circuit connections.
Tick the specs you need, then view products that match.
| Current | 25 A | |
|---|---|---|
| Voltage | 500 V | |
| Terminal Type | Fuse | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Type of fuse holder | Pluggable | |
| Type of fuse insert | Blade fuse | |
| Connectable conductor cross section fine-strand with cable end sleeve | 1.5 – 6 mm² | |
| Height | 96.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 25 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 10 mm² | |
| Width | 7.5 mm | |
| Rated voltage | 500 V | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Number of levels | 1 | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Closing plate required | Yes | |
| Connectable conductor cross section multi-wired | 0.5 – 6 mm² | |
| Connectable conductor cross section solid-core | 1 – 10 mm² | |
| Depth | 32.9 mm | |
| Supply voltage for defect-indication | 24 – 24 V | |
| Voltage type for defect indication | AC | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Type of indication element for defect indication | LED | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2006 Series | |
| Model | 2006-1681/1000-413 | |
| Product type | Fuse terminal block with LED indication | |
| Terminal configuration | 2-conductor, single-level | |
| Fuse holder type | Automotive blade-style fuse receptacle | |
| Fuse compatibility | Compatible automotive blade-style fuses | |
| Blown fuse indication | Integrated LED | |
| LED indication voltage | 24 V | |
| Rated current (IEC) | 25 A under the specified rating conditions | |
| Additional rated current | 30 A under the applicable specified conditions | |
| Rated voltage (IEC) | 500 V for the specified terminal insulation rating | |
| Rated impulse voltage | 8 kV under the specified IEC conditions | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Nominal conductor cross-section | 6 mm² | |
| Solid conductor range | 0.5–10 mm² | |
| Solid conductor push-in termination | 2.5–10 mm² | |
| Fine-stranded conductor range | 0.5–10 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–6 mm² | |
| Fine-stranded conductor with ferrule, push-in termination | 2.5–6 mm² | |
| Conductor size range | 20–8 AWG, depending on conductor type | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation method | Operating tool where required | |
| Number of clamping points | 2 | |
| Number of potentials | 2 | |
| Number of jumper slots | 2 | |
| Wiring direction | Front-entry wiring | |
| Stripping length | 13–15 mm | |
| Conductor material | Copper | |
| Insulation material | Polyamide (PA66) | |
| Flammability rating | UL 94 V-0 | |
| Height from upper edge of DIN rail | 32.9 mm | |
| Dimensions (W × H × D) | 7.5 × 32.9 × 96.3 mm, using the manufacturer's DIN rail reference dimension | |
| Weight | Approx. 18 g | |
| Mounting type | DIN rail mounting | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Marking arrangement | Centre and side marking | |
| RoHS compliance | Compliant without exemption, according to the referenced product documentation | |
| Country of origin | Germany | |
| Standard packaging unit | 25 pieces | |
| Packaging type | Box | |
| GTIN / EAN | 4045454789640 |
The WAGO 2006-1681/1000-413 is a 2-conductor DIN rail fuse terminal block designed for compatible automotive blade-style fuses. It combines fused circuit protection, an integrated test option and 24 V LED blown fuse indication for industrial control panels and automation systems.
The terminal block is designed for compatible automotive blade-style fuses. The fuse format, current rating, voltage rating and power dissipation must be checked against the manufacturer's requirements and the needs of the protected circuit.
The WAGO 2006-1681/1000-413 is specified with 24 V LED blown fuse indication, making it suitable for appropriately designed 24 V control circuits. The LED-equipped configuration and complete installation must be operated within their applicable voltage ratings.
The terminal block documentation lists a 25 A IEC rated current under specified conditions and a separate 30 A rating under applicable conditions. The base terminal insulation rating is 500 V IEC, but the integrated LED indication is intended for a 24 V application. The selected fuse and the ratings of the complete circuit determine the permissible operating conditions.
The WAGO 2006-1681/1000-413 has a 6 mm² nominal conductor cross-section and supports conductor sizes from 0.5–10 mm², depending on conductor type and termination method. It uses Push-in CAGE CLAMP® technology and mounts on standard 35 × 7.5 mm or 35 × 15 mm DIN rails.
WAGO TOPJOB® S fuse terminal blocks are designed to support reliable conductor connections, efficient circuit protection and organised electrical panel construction. The WAGO 2006-1681/1000-413 combines automotive blade fuse compatibility, 24 V LED blown fuse indication and an integrated test option in a compact DIN rail-mounted design, helping industrial automation engineers and panel builders improve fault identification and maintenance efficiency.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.