Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.85
The WAGO 2006-1674 is a 2-conductor disconnect terminal block designed for industrial control panels, electrical distribution assemblies and test and measurement applications. Part of the WAGO TOPJOB S 2006 series, it combines a pivoting knife disconnect, an integrated test option and Push-in CAGE CLAMP® connection technology in a compact DIN rail-mounted component.
Featuring a 6 mm² nominal conductor cross-section, 30 A IEC rated current and 800 V IEC rated voltage, the WAGO 2006-1674 provides a convenient means of establishing or interrupting an electrical connection for appropriate testing and maintenance procedures. Its blue insulating housing and distinctive orange disconnect link help identify the terminal and its operating mechanism within an electrical assembly.
The terminal block has a 7.5 mm width and mounts on standard 35 × 7.5 mm and 35 × 15 mm DIN rails. Its front-entry conductor connections, two jumper slots and centre/side marking positions support efficient panel construction, clear circuit identification and organised wiring arrangements.
The WAGO 2006-1674 provides a practical solution for incorporating a disconnect point into industrial electrical control and measurement circuits. Its pivoting knife disconnect allows the connection between the two conductor terminals to be opened for appropriate testing, inspection and fault-finding procedures. The integrated test option supports convenient access for compatible test equipment, while the orange disconnect link makes the operating mechanism easy to identify.
The Push-in CAGE CLAMP® connection system supports reliable spring-pressure conductor termination, and the compact 7.5 mm width enables efficient use of DIN rail space. Its blue housing, marking positions and compatible jumper slots help maintain clear, organised wiring arrangements. The disconnect mechanism is intended for the manufacturer's specified test and isolation functions and must not be assumed suitable for interrupting load current or replacing a safety isolation device. Testing and maintenance must follow the applicable electrical safety procedures.
Tick the specs you need, then view products that match.
| Current | 30 A | |
|---|---|---|
| Voltage | 800 V | |
| Terminal Type | Disconnect / Test | |
| Colour | Blue | |
| Connection | Spring clamp | |
| Number of Connection Points | 2 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 1.5 – 6 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 96.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 30 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 10 mm² | |
| Rated voltage | 800 V | |
| Width | 7.5 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Blue | |
| Connectable conductor cross section multi-wired | 0.5 – 6 mm² | |
| Connectable conductor cross section solid-core | 1 – 10 mm² | |
| Type of cross disconnection | None | |
| Depth | 36.8 mm | |
| Type of slitting | None | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Product family | TOPJOB S | |
| Series | 2006 | |
| Manufacturer part number | 2006-1674 | |
| Product type | 2-conductor disconnect terminal block | |
| Main product function | Disconnect terminal block for test and measurement | |
| Disconnect mechanism | Pivoting knife disconnect | |
| Test option | Integrated | |
| Disconnect link colour | Orange | |
| Number of conductor connection points | 2 | |
| Number of electrical potentials | 1 | |
| Number of jumper slots | 2 | |
| Nominal conductor cross-section | 6 mm² | |
| Solid conductor cross-section | 0.5–10 mm² | |
| Solid conductor push-in range | 2.5–10 mm² | |
| Fine-stranded conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–6 mm² | |
| Fine-stranded conductor with ferrule, push-in termination | 2.5–6 mm² | |
| Conductor material | Copper | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Wiring direction | Front-entry | |
| Stripping length | 13–15 mm | |
| IEC rated voltage | 800 V | |
| IEC rated current | 30 A | |
| Rated impulse voltage | 8 kV | |
| UL rated voltage | 600 V | |
| UL rated current | 30 A | |
| Terminal block width | 7.5 mm | |
| Depth from upper edge of DIN rail | 36.8 mm | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Marking positions | Centre and side marking | |
| Housing colour | Blue | |
| Insulation material | Polyamide PA66 | |
| Flammability classification | UL94 V-0 | |
| Fire load | 0.296 MJ | |
| Weight | Approximately 19.5 g | |
| Processing temperature | −35 to +85 °C | |
| Continuous operating temperature | −60 to +105 °C | |
| Country of origin | China | |
| GTIN / EAN | 4050821181699 | |
| Manufacturer packaging unit | 25 pieces |
The WAGO 2006-1674 is a blue 2-conductor disconnect terminal block with a pivoting knife disconnect and integrated test option. It is designed to provide a convenient circuit disconnect point for electrical testing, measurement and maintenance in industrial DIN rail assemblies.
The WAGO 2006-1674 has an 800 V IEC rated voltage, 30 A IEC rated current and 8 kV rated impulse voltage. Its UL ratings are 600 V and 30 A, subject to the applicable approval and installation conditions.
The terminal block has a 6 mm² nominal cross-section and accepts solid and fine-stranded copper conductors from 0.5–10 mm², subject to conductor preparation. Direct push-in termination is specified for solid conductors from 2.5–10 mm² and suitable fine-stranded conductors with ferrules from 2.5–6 mm².
Yes. The WAGO 2006-1674 includes an integrated test option alongside its pivoting knife disconnect. These features support appropriate circuit measurement, testing and maintenance using compatible equipment and safe working procedures.
The WAGO 2006-1674 has a blue housing and an orange disconnect link. It mounts on standard 35 × 7.5 mm and 35 × 15 mm DIN rails and has a compact 7.5 mm width.
WAGO TOPJOB S disconnect terminal blocks provide electrical engineers, industrial panel builders and automation professionals with practical solutions for organised circuit testing and maintenance. The WAGO 2006-1674 combines a pivoting knife disconnect, integrated test option, Push-in CAGE CLAMP® technology and a distinctive blue housing with an orange disconnect link to support reliable industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.