Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.75
The WAGO 2006-1671 is a 2-conductor disconnect terminal block with a pivoting knife disconnect and integrated test option, designed for reliable circuit isolation and electrical testing within industrial control panels, automation cabinets and distribution assemblies. Part of the established WAGO TOPJOB S 2006 series, this DIN rail-mounted terminal block combines secure conductor termination with a manually operated disconnect mechanism.
Featuring a distinctive orange pivoting disconnect link, the WAGO 2006-1671 allows technicians to open or close the electrical connection between two conductor terminals. Its integrated test facility supports circuit measurement and troubleshooting, making it particularly useful in electrical installations where individual circuits require convenient access for inspection, commissioning or maintenance.
The terminal block incorporates Push-in CAGE CLAMP® connection technology, a 6 mm² nominal conductor cross-section and a compact 7.5 mm terminal width. With an IEC rated current of 30 A and 800 V rated insulation voltage, it provides a practical solution for industrial control and distribution applications requiring dependable electrical connections and accessible circuit disconnection.
Disconnect terminal blocks such as the WAGO 2006-1671 provide an efficient way to incorporate individual circuit disconnection points into DIN rail terminal assemblies. Instead of removing conductors to interrupt an electrical connection, the terminal block uses a pivoting knife disconnect mechanism that opens the conductive path between the two terminals.
The orange disconnect link is readily distinguishable from the grey terminal housing, making the operating mechanism easy to identify during panel inspection. This design is useful where technicians need to separate circuit sections for testing, fault investigation or maintenance. The disconnect mechanism should be operated in accordance with the manufacturer's instructions and the installation's electrical safety procedures.
The integrated test option provides an additional benefit for commissioning and maintenance personnel. Compatible test equipment and accessories can be used to perform measurements without unnecessarily disturbing the installed conductor connections. This helps preserve wiring organisation and supports repeatable testing procedures in industrial electrical panels.
The terminal block uses Push-in CAGE CLAMP® technology, which maintains conductor contact pressure through a spring-clamping mechanism. Suitable solid conductors and correctly prepared ferruled conductors can be inserted directly within the specified ranges, while other conductor types can be connected using an appropriate operating tool. This supports efficient installation and dependable electrical contact without routine screw retightening.
With a 30 A IEC current rating, 800 V rated insulation voltage and compact 7.5 mm width, the WAGO 2006-1671 is well suited to control and distribution applications requiring accessible circuit disconnection. The terminal block does not incorporate a fuse or overcurrent protective device, so suitable circuit protection must be provided separately where required.
Tick the specs you need, then view products that match.
| Current | 30 A | |
|---|---|---|
| Voltage | 800 V | |
| Terminal Type | Disconnect / Test | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 2 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 1.5 – 6 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 96.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 30 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 10 mm² | |
| Rated voltage | 800 V | |
| Width | 7.5 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.5 – 6 mm² | |
| Connectable conductor cross section solid-core | 1 – 10 mm² | |
| Type of cross disconnection | None | |
| Depth | 36.8 mm | |
| Type of slitting | None | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Product range | TOPJOB S | |
| Series | 2006 | |
| Manufacturer part number | 2006-1671 | |
| Product type | 2-conductor disconnect terminal block | |
| Terminal category | DIN rail disconnect and test terminal blocks | |
| Main function | Electrical circuit disconnection and testing | |
| Disconnect mechanism | Pivoting knife disconnect | |
| Disconnect link colour | Orange | |
| Test facility | Integrated test option | |
| Number of conductor connections | 2 | |
| Number of electrical circuits | 1 | |
| Rated voltage (IEC) | 800 V | |
| Rated impulse withstand voltage | 6 kV | |
| Rated current (IEC) | 30 A | |
| Pollution degree | 3 | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL, application-dependent) | 15–30 A | |
| Nominal conductor cross-section | 6 mm² | |
| Solid conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor cross-section | 0.5–10 mm² | |
| Conductor range (AWG) | 20–8 AWG | |
| Direct push-in solid conductor range | 2.5–10 mm² | |
| Direct push-in conductor range with suitable insulated ferrules | 2.5–6 mm² | |
| Connection technology | Push-in CAGE CLAMP® | |
| Connection actuation | Operating tool | |
| Conductor material | Copper | |
| Conductor stripping length | 13–15 mm | |
| Wiring direction | Front entry | |
| Mounting | DIN-35 rail | |
| Compatible mounting rails | 35 × 7.5 mm and 35 × 15 mm | |
| Dimensions (W × H × D) | 7.5 × 36.8 × 96.3 mm | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Housing colour | Grey | |
| Packaging unit | 25 pieces | |
| RoHS compliance | Compliant | |
| Important application note | The disconnect mechanism is intended for circuit disconnection and testing within its specified ratings; it must not be assumed to provide a load-break or safety-isolation function without confirmation of the applicable switching and isolation requirements. |
The WAGO 2006-1671 is a two-conductor disconnect terminal block used to provide a manually operated disconnection point within an electrical circuit. It features a pivoting knife disconnect, an orange disconnect link and an integrated test option for industrial electrical testing and maintenance.
No. The WAGO 2006-1671 is a disconnect terminal block rather than a fuse terminal block. Its pivoting knife mechanism opens or closes the circuit connection but does not provide overcurrent protection. A suitable protective device must be installed separately where required.
The terminal block has an IEC rated current of 30 A, a rated insulation voltage of 800 V and a rated impulse withstand voltage of 6 kV. Its UL ratings depend on the applicable approval and installation category.
The WAGO 2006-1671 has a nominal conductor cross-section of 6 mm² and accepts suitable solid and fine-stranded copper conductors from 0.5–10 mm². Direct push-in ranges depend on conductor construction and ferrule preparation.
The WAGO 2006-1671 includes a pivoting knife disconnect with an orange operating link, allowing the circuit connection to be opened for testing. The WAGO 2006-1601 is a through terminal block with a test option and a continuous conductor connection rather than a pivoting disconnect mechanism.
WAGO TOPJOB S terminal block systems are widely used by electrical engineers, industrial panel builders and automation specialists for dependable, space-efficient wiring. The WAGO 2006-1671 combines Push-in CAGE CLAMP® conductor connections, an orange pivoting knife disconnect and an integrated test option to support organised electrical circuits, accessible testing and efficient maintenance within industrial control installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.