Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.37
The WAGO 2006-1631/1099-541 is a reliable 2-conductor fuse terminal block with a pivoting fuse holder and LED blown-fuse indication, designed for industrial electrical control panels, automation systems and distribution assemblies. As part of the WAGO TOPJOB® S 2006 series, it combines convenient fuse access with secure Push-in CAGE CLAMP® conductor connections.
This fuse terminal block accommodates a ¼ × 1¼ inch (6.3 × 32 mm) glass cartridge fuse and features an integrated 12–30 V LED blown-fuse indicator. The pivoting fuse holder provides convenient access for fuse inspection and replacement, while the included end plate supports straightforward installation within terminal block assemblies.
With a 6 mm² nominal conductor cross-section, 10 A rated current and compact 10.4 mm width, the WAGO 2006-1631/1099-541 is suitable for protecting individual electrical circuits in industrial machinery and control systems. Its DIN-rail mounting design and Push-in CAGE CLAMP® technology simplify panel assembly and help maintain dependable electrical connections.
Fuse terminal blocks provide a convenient method of incorporating replaceable overcurrent protection into industrial electrical circuits. The WAGO 2006-1631/1099-541 combines a pivoting cartridge fuse holder with spring-pressure conductor connections, allowing individual circuits to be protected within a compact DIN-rail terminal assembly.
The integrated 12–30 V LED blown-fuse indicator assists maintenance personnel in identifying an open fuse when the appropriate indication voltage is present. This can simplify fault diagnosis and reduce the time required to locate affected circuits in industrial automation and machinery control applications.
WAGO's Push-in CAGE CLAMP® technology provides secure electrical connections for suitable copper conductors, including solid and fine-stranded conductors. The pivoting fuse holder facilitates access to the cartridge fuse, while the included end plate helps complete the terminal assembly. Fuse selection must account for the protected circuit, the applicable fuse characteristics and the terminal block's electrical ratings.
The terminal block's 800 V IEC insulation rating should not be confused with the operating voltage of its LED indication circuit, which is designed for 12–30 V. The complete installation must comply with the applicable fuse, circuit and terminal assembly ratings. Fuse inspection and replacement should be performed only after safe electrical isolation.
Tick the specs you need, then view products that match.
| Current | 10 A | |
|---|---|---|
| Voltage | 800 V | |
| Terminal Type | Fuse | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Type of fuse holder | Swivelling | |
| Type of fuse insert | G-fuse 5x20 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 1.5 – 6 mm² | |
| Height | 96.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 10 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 10 mm² | |
| Width | 10.4 mm | |
| Rated voltage | 800 V | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Number of levels | 1 | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.5 – 6 mm² | |
| Connectable conductor cross section solid-core | 1 – 10 mm² | |
| Depth | 59 mm | |
| Supply voltage for defect-indication | 12 – 30 V | |
| Voltage type for defect indication | AC | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Type of indication element for defect indication | LED | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2006 Series | |
| Model | 2006-1631/1099-541 | |
| Product type | 2-conductor fuse terminal block | |
| Connection technology | Push-in CAGE CLAMP® | |
| Number of connection points | 2 | |
| Number of potentials | 1 | |
| Nominal cross-section | 6 mm² | |
| Solid conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–6 mm² | |
| Solid conductor push-in termination | 1–10 mm² | |
| Fine-stranded conductor with ferrule, push-in termination | 2.5–6 mm² | |
| Conductor material | Copper | |
| Strip length | 13–15 mm | |
| Wiring direction | Front-entry | |
| Rated current | 10 A | |
| Rated voltage (IEC/EN 60664-1, III/3) | 800 V | |
| Rated impulse voltage | 8 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Fuse type | Glass cartridge fuse | |
| Fuse dimensions | ¼ × 1¼ inch (approximately 6.3 × 32 mm) | |
| Fuse holder design | Pivoting | |
| Blown-fuse indicator | LED | |
| LED indication voltage | 12–30 V | |
| End plate | Included | |
| Number of jumper slots | 2 | |
| Mounting type | DIN-35 rail | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Depth from upper edge of DIN rail | 59 mm | |
| Insulation material | Polyamide (PA66) | |
| Material group | I | |
| Flammability class | UL 94 V-0 | |
| Processing temperature | −35 to +85 °C | |
| Continuous operating temperature | −60 to +105 °C | |
| Fire load | 0.588 MJ | |
| Weight | Approximately 29.9 g | |
| Marking level | Centre / side marking | |
| Manufacturer packaging unit | 25 pieces | |
| Country of origin | Germany | |
| GTIN | 4045454824082 |
The WAGO 2006-1631/1099-541 is a 2-conductor fuse terminal block used to integrate cartridge fuse protection into industrial electrical control and distribution systems. It features a pivoting fuse holder and LED blown-fuse indication.
The terminal block accepts ¼ × 1¼ inch glass cartridge fuses, equivalent to approximately 6.3 × 32 mm. The fuse rating and characteristics must be selected according to the protected circuit.
The WAGO 2006-1631/1099-541 has a 10 A rated current. The permissible operating current also depends on the installed fuse and applicable operating conditions.
The integrated blown-fuse indication LED is designed for 12–30 V applications. This indication voltage is separate from the terminal block's IEC insulation rating.
The terminal block has a 6 mm² nominal cross-section and supports suitable solid and fine-stranded copper conductors from 0.5–10 mm². The permitted range depends on conductor construction, ferrules and the termination method.
Yes. The terminal block features WAGO Push-in CAGE CLAMP® connections, allowing suitable solid conductors and fine-stranded conductors with ferrules to be inserted directly into the connection point without a separate tightening operation.
Yes. The WAGO 2006-1631/1099-541 features a pivoting fuse holder that provides access to the cartridge fuse. The circuit must be safely isolated before inspection or replacement.
The terminal block is designed for standard 35 mm DIN rails, including 35 × 7.5 mm and 35 × 15 mm profiles.
The terminal block has a 10.4 mm width, 96.3 mm height and 59 mm depth measured from the upper edge of the DIN rail.
Yes. The WAGO 2006-1631/1099-541 is supplied with an end plate as part of its fuse terminal block assembly.
WAGO TOPJOB® S terminal block systems are widely used by electrical engineers, machine builders and automation professionals for dependable industrial wiring and circuit protection. The WAGO 2006-1631/1099-541 combines Push-in CAGE CLAMP® connectivity, a pivoting fuse holder and LED blown-fuse indication to support efficient installation, maintenance and fault identification in compatible electrical control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.