Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.94
The WAGO 2006-1621 is a 2-conductor fuse terminal block with a pivoting fuse holder, designed for reliable conductor termination and cartridge fuse protection in industrial electrical installations. Part of the WAGO TOPJOB S 2006 series, it accommodates 5 × 30 mm miniature metric fuses and uses proven Push-in CAGE CLAMP® connection technology.
Unlike LED-equipped variants, the WAGO 2006-1621 is supplied without blown-fuse indication. This makes it suitable for applications where a straightforward, compact fuse terminal block is required without an integrated indicator circuit. The pivoting fuse holder provides convenient access for fuse inspection and replacement after the electrical supply has been safely isolated.
With a 6 mm² nominal conductor cross-section, 10 A IEC rated current and compact 7.5 mm width, the WAGO 2006-1621 supports space-efficient installation on standard 35 mm DIN rails. Its grey insulating housing and spring-pressure conductor connections make it a practical choice for electrical panel builders, machinery manufacturers and industrial automation engineers.
The WAGO 2006-1621 combines a fuse holder and two conductor connections in a single compact terminal block. This arrangement simplifies the construction of fused control circuits by reducing the need for separate rail-mounted fuse holders and additional interconnecting components.
Its pivoting fuse carrier is designed to accept 5 × 30 mm miniature metric fuses. The holder can be opened to access the cartridge, making fuse inspection and replacement convenient during planned maintenance. Fuse replacement must always be performed after the circuit has been safely isolated and confirmed de-energised, using a correctly specified replacement fuse.
The terminal block uses Push-in CAGE CLAMP® technology, which maintains conductor contact pressure through a spring-clamping mechanism. Suitable solid conductors and correctly prepared ferruled conductors can be inserted directly within the specified ranges, while other conductor types can be connected using an appropriate operating tool. This supports efficient wiring and dependable electrical connections without routine screw retightening.
Because the 2006-1621 does not include an LED blown-fuse indicator, it avoids the additional indication circuit present in variants such as the 2006-1621/1000-836. This is useful where indication is provided elsewhere, where a passive fuse arrangement is preferred or where leakage through an indicator circuit would be undesirable.
The terminal block's rated current and voltage must be considered alongside the installed fuse and the overall installation conditions. In particular, fuse heat dissipation, adjacent terminal loading, ambient temperature and the prospective fault current can affect the suitability of the assembly. The terminal block rating alone does not establish the protection performance of the selected fuse.
Tick the specs you need, then view products that match.
| Current | 10 A | |
|---|---|---|
| Voltage | 800 V | |
| Terminal Type | Fuse | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Type of fuse holder | Swivelling | |
| Type of fuse insert | G-fuse 5x30 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 1.5 – 6 mm² | |
| Height | 96.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 10 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 10 mm² | |
| Width | 7.5 mm | |
| Rated voltage | 800 V | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Number of levels | 1 | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Closing plate required | Yes | |
| Connectable conductor cross section multi-wired | 0.5 – 6 mm² | |
| Connectable conductor cross section solid-core | 1 – 10 mm² | |
| Depth | 59 mm | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Type of indication element for defect indication | None | |
| Manufacturer | WAGO | |
| Product range | TOPJOB S | |
| Series | 2006 | |
| Manufacturer part number | 2006-1621 | |
| Product type | 2-conductor fuse terminal block | |
| Accessory category | DIN rail fuse terminal blocks | |
| Fuse holder design | Pivoting | |
| Fuse size | 5 × 30 mm | |
| Fuse format | Miniature metric cartridge fuse | |
| Blown-fuse indication | Without indication | |
| Number of connection points | 2 | |
| Number of electrical potentials | 1 | |
| Rated current (IEC) | 10 A | |
| Rated voltage (IEC) | 800 V | |
| Rated impulse withstand voltage | 8 kV | |
| Pollution degree | 3 | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Nominal conductor cross-section | 6 mm² | |
| Solid conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor cross-section | 0.5–10 mm² | |
| Conductor range (AWG) | 20–8 AWG | |
| Direct push-in solid conductor range | 2.5–10 mm² | |
| Direct push-in conductor range with suitable insulated ferrules | 2.5–6 mm² | |
| Connection technology | Push-in CAGE CLAMP® | |
| Wiring direction | Front entry | |
| Conductor stripping length | 13–15 mm | |
| Mounting | DIN-35 rail | |
| Compatible DIN rail profiles | 35 × 7.5 mm and 35 × 15 mm | |
| Overall height | 96.3 mm | |
| Depth from upper edge of DIN rail | 59 mm | |
| Housing material | Polyamide (PA66) | |
| Flammability classification | UL94 V-0 | |
| Weight | Approx. 24.3 g | |
| Packaging unit | 25 pieces | |
| GTIN / EAN | 4045454821173 | |
| Applicable terminal block standard | IEC/EN 60947-7-3 | |
| Important selection requirement | The fuse current rating, voltage rating, breaking capacity and permissible power dissipation must be suitable for the complete circuit. |
The WAGO 2006-1621 is a two-conductor DIN rail fuse terminal block used to connect electrical conductors through a replaceable cartridge fuse. It is suitable for appropriately designed industrial control, auxiliary and distribution circuits.
The WAGO 2006-1621 is designed for 5 × 30 mm miniature metric cartridge fuses. The selected fuse must have the correct current rating, voltage rating, breaking capacity and operating characteristic for the protected circuit.
No. The standard WAGO 2006-1621 is supplied without blown-fuse indication. LED-equipped alternatives are available in the same product family, including the 2006-1621/1000-836 with 230 V LED indication.
The terminal block has a 10 A IEC rated current and a nominal conductor cross-section of 6 mm². It accepts suitable copper conductors from 0.5–10 mm², depending on conductor construction and preparation. The permissible operating current must also account for the installed fuse and application conditions.
Both are WAGO TOPJOB S two-conductor fuse terminal blocks with pivoting fuse holders, Push-in CAGE CLAMP® connections and a 6 mm² nominal cross-section. The key difference is the fuse size: the 2006-1611 accepts 5 × 20 mm fuses, while the 2006-1621 accepts 5 × 30 mm fuses.
WAGO TOPJOB S terminal block systems are widely specified by electrical engineers, industrial panel builders and automation specialists for reliable, space-efficient wiring. The WAGO 2006-1621 combines a pivoting 5 × 30 mm cartridge fuse holder with dependable Push-in CAGE CLAMP® connections, providing a practical solution for organised fused circuit installations and maintainable industrial electrical panels.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.