Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.05
The WAGO 2002-2941 is a compact double-deck, double-disconnect terminal block designed for flexible circuit isolation, testing and component connections in industrial control panels and automation systems. Part of the WAGO TOPJOB® S 2002 series, this grey DIN-rail terminal block combines two independently disconnectable circuits with reliable Push-in CAGE CLAMP® connection technology.
Featuring an L/L carrier/carrier configuration, the WAGO 2002-2941 accommodates compatible disconnect plugs, fuse plugs or component plugs, allowing electrical circuits to be configured for isolation, protection or additional functionality. Each level provides two conductor connection points, giving four connection points across the two-deck arrangement. Its modular design is particularly useful where circuit access and flexibility are important.
With a 2.5 mm² nominal conductor cross-section, an IEC rated voltage of 400 V, a rated current of 16 A and a compact 5.2 mm width, the WAGO 2002-2941 provides an efficient solution for industrial control wiring. The terminal block mounts onto standard 35 mm DIN rails and supports conductor cross-sections from 0.25–4 mm², depending on conductor construction.
The WAGO 2002-2941 provides a flexible interface between field wiring and industrial control equipment. Its two independent disconnect positions allow individual circuits to be configured with compatible plugs for isolation, testing or component integration. For example, a WAGO 2002-401 disconnect plug can be inserted into a carrier position to establish the intended electrical connection and removed or parked as specified for the installation.
The double-deck construction allows two circuit paths to be accommodated within a narrow DIN-rail footprint, while Push-in CAGE CLAMP® technology provides dependable spring-pressure conductor termination. Compatible fuse and component plugs extend the terminal block's functionality, making it suitable for modular control panel designs where circuit accessibility and straightforward maintenance are important. Electrical ratings and permitted functions must be checked for the complete terminal-and-plug assembly.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 400 V | |
| Terminal Type | Feed-through | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 4 | |
| Number of Levels | 2 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 108 mm | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | 105 – 105 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 4 mm² | |
| Width | 5.2 mm | |
| Rated voltage | 400 V | |
| Type of electrical connection 2 | Spring clamp connection | |
| Material insulation body | Thermoplastic | |
| Number of levels | 2 | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Explosion-tested version 'Ex e' | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.25 – 2.5 mm² | |
| Connectable conductor cross section solid-core | 0.75 – 4 mm² | |
| Depth | 42 mm | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2002 | |
| Model | 2002-2941 | |
| Product type | Double-deck, double-disconnect terminal block | |
| Terminal configuration | Carrier/carrier | |
| Potential marking | L/L | |
| Number of conductor connection points | 4 | |
| Disconnect positions | 2 | |
| Nominal cross-section | 2.5 mm² | |
| Rated voltage (IEC) | 400 V | |
| Rated current (IEC) | 16 A | |
| Rated impulse withstand voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL) | 300 V | |
| Rated current (UL) | 15 A | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductor material | Copper | |
| Solid conductor cross-section | 0.25–4 mm² | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Fine-stranded conductor cross-section | 0.25–4 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–2.5 mm² | |
| Fine-stranded conductor with ferrule, direct push-in | 1–2.5 mm² | |
| Conductor size | 22–12 AWG | |
| Conductor stripping length | 10–12 mm | |
| Wiring direction | Front entry | |
| Compatible disconnect plug | WAGO 2002-401 | |
| Compatible plug functions | Disconnect, fuse and component connections | |
| Mounting type | DIN-35 rail | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Terminal width | 5.2 mm | |
| Terminal depth | 108 mm | |
| Height above DIN rail | 42 mm | |
| Housing colour | Grey | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Marking position | Side marking | |
| Applicable terminal standard | IEC/EN 60947-7-1 | |
| Country of origin | Germany | |
| GTIN | 4050821356561 |
The WAGO 2002-2941 is a double-deck, double-disconnect terminal block used for configurable electrical connections in industrial control panels and automation systems. It supports compatible disconnect, fuse and component plugs for circuit isolation, protection and functional integration.
The WAGO 2002-2941 has an IEC rated voltage of 400 V and a rated current of 16 A, with a rated impulse withstand voltage of 6 kV. Its UL ratings are 300 V and 15 A. The applicable rating of a complete assembly may depend on the plug or component installed.
The terminal block is designed for compatible TOPJOB® S disconnect, fuse and component plugs. The WAGO 2002-401 disconnect plug is one compatible accessory. Other plug types must be selected according to WAGO's accessory compatibility and application requirements.
The terminal block has a 2.5 mm² nominal cross-section and accepts solid and fine-stranded copper conductors from 0.25–4 mm². The direct push-in range depends on conductor construction and ferrule preparation, and the recommended stripping length is 10–12 mm.
Both products are double-deck carrier terminal blocks in the WAGO TOPJOB® S 2002 series with an L/L configuration. The 2002-2941 is specifically described as a double-deck, double-disconnect terminal block, while the 2002-2961 is a double-deck carrier terminal block. The appropriate model should be selected according to the intended plug configuration and WAGO's compatibility information.
WAGO TOPJOB® S terminal blocks are used by electrical engineers, control panel builders and industrial automation professionals for dependable conductor termination, organised circuit wiring and modular control cabinet construction. The WAGO 2002-2941 combines compact double-deck construction, two disconnect positions and Push-in CAGE CLAMP® technology to provide a flexible connection interface for industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.