Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
WAGO 2002-2611 is a 6.2 mm wide TOPJOB S double-deck through/fuse terminal block with Push-in CAGE CLAMP connection, a pivoting holder for 5 × 20 mm fuses and a 6.3 A IEC current rating for compact DIN rail circuit protection.
£3.25
The WAGO 2002-2611 is a TOPJOB® S double-deck through/fuse terminal block with a pivoting fuse holder, designed to combine standard feed-through connection and fused circuit protection within a compact DIN rail-mounted format. Its double-level construction is ideal for control panels where high wiring density and straightforward fuse access are important.
The upper fuse level accommodates a standard 5 × 20 mm miniature metric fuse, while the terminal uses WAGO's proven Push-in CAGE CLAMP® connection technology for fast, vibration-resistant conductor termination. Suitable solid and ferruled conductors can be pushed directly into the connection point, reducing wiring time during panel assembly and maintenance.
The standard 2002-2611 version is supplied without blown-fuse indication and provides a rated current of 6.3 A and nominal voltage of 250 V according to IEC/EN 60947-7-3. With a width of only 6.2 mm, four connection points and two potentials, it provides fused and through connectivity while making efficient use of DIN rail space.
Double-deck fuse terminal blocks allow panel builders to combine two circuit functions within the footprint normally occupied by a single-width terminal position. The WAGO 2002-2611 combines a through level with a fused level, helping increase wiring density while keeping the fuse accessible for inspection, isolation and replacement.
WAGO's Push-in CAGE CLAMP® connection technology further simplifies panel wiring by allowing suitable prepared conductors to be inserted directly without manually opening the clamping unit. Combined with the pivoting 5 × 20 mm fuse holder, this makes the 2002-2611 particularly suitable for control and auxiliary circuits that require compact installation, reliable connections and accessible fuse protection.
Tick the specs you need, then view products that match.
| Voltage | 250 V | |
|---|---|---|
| Current | 6.3 A | |
| Number of Connection Points | 4 | |
| Connection | Push-in | |
| Terminal Type | Fuse | |
| Conductor Size | 2.5 mm² | |
| Number of Levels | 2 | |
| Product Series | WAGO TOPJOB S | |
| Colour | Grey | |
| HS Code | 85369095 | |
| Country of Manufacture | China | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S / 2002 Series | |
| Model | 2002-2611 | |
| Manufacturer part number | 2002-2611 | |
| Product type | Double-deck fuse terminal block | |
| Terminal function | Through / Fuse | |
| Circuit arrangement | L/L | |
| Fuse holder | Pivoting | |
| Fuse size | 5 × 20 mm miniature metric fuse | |
| Blown-fuse indication | No | |
| Connection technology | Push-in CAGE CLAMP® | |
| Rated cross-section | 2.5 mm² | |
| Conductor range | 0.25–2.5 mm², with up to 4 mm² depending on conductor type | |
| Strip length | 10–12 mm | |
| Rated current | 6.3 A | |
| Nominal voltage IEC | 250 V | |
| Rated voltage UL | 300 V | |
| Rated impulse voltage | 6 kV | |
| Pollution degree | 3 | |
| Number of levels | 2 | |
| Number of connection points | 4 | |
| Number of potentials | 2 | |
| Width | 6.2 mm | |
| Height | 76 mm | |
| Depth | 93 mm | |
| Product weight | approx. 22.9 g | |
| Colour | Grey | |
| Insulation material | Polyamide | |
| Mounting | DIN rail | |
| Compatible DIN rails | 35 × 7.5 mm / 35 × 15 mm | |
| Applicable IEC/EN standard | IEC/EN 60947-7-3 |
The WAGO 2002-2611 is a double-deck through/fuse terminal block that combines a standard through connection with a fused circuit connection, making it suitable for compact industrial control and electrical distribution panels.
The pivoting fuse holder is designed for a standard 5 × 20 mm miniature metric fuse. Electrical ratings of the fused circuit must also take the characteristics of the installed fuse into account.
No. The standard 2002-2611 is supplied without blown-fuse indication. WAGO offers separate variants within this product family with LED blown-fuse indication for specified voltage ranges.
The terminal has a rated current of 6.3 A and a nominal IEC voltage of 250 V, with a rated impulse voltage of 6 kV. The applicable electrical rating of the fused circuit also depends on the fuse used.
The 2002-2611 uses Push-in CAGE CLAMP® connection technology, allowing suitable solid and ferruled conductors to be inserted directly while providing a secure spring-pressure connection for industrial wiring.
WAGO TOPJOB® S terminal blocks combine compact DIN rail construction with proven spring-pressure connection technology, helping panel builders create reliable, space-efficient and serviceable electrical connections for industrial control and distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.