2002-1974 Wago 2-conductor disconnect/test terminal block; 2.5 mm²; orange; with additional jumper position; orange disconnect link; Push-in CAGE CLAMP®

2002-1974 Wago 2-conductor disconnect/test terminal block; 2.5 mm²; orange; with additional jumper position; orange disconnect link; Push-in CAGE CLAMP®

SKU: 2002-1974MPN: 2002-1974
Price
List Price £2.82 ex VAT
Your Price (ex VAT) Save 35%
£1.83 35% OFF
You save £0.987 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £1.83
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 50

£1.83

Why Choose the WAGO 2002-1974 TOPJOB® S 2-Conductor Disconnect/Test Terminal Block?

The WAGO 2002-1974 is a professional blue 2-conductor disconnect/test terminal block with an additional jumper position, designed for reliable electrical connections, circuit testing and controlled disconnection in industrial automation and instrumentation systems. Part of the established WAGO TOPJOB® S 2002 Series, this compact DIN rail-mounted terminal block combines an orange knife-disconnect link with WAGO's proven Push-in CAGE CLAMP® connection technology.

Unlike a conventional through terminal block, the WAGO 2002-1974 incorporates a disconnectable electrical path between its two conductor connection points. This allows technicians to separate circuit sections for appropriate testing, commissioning and maintenance procedures without removing the connected conductors.

A key advantage of this model is its additional jumper position, which provides extra flexibility when designing compatible cross-connected terminal block arrangements. This feature distinguishes the WAGO 2002-1974 from the standard WAGO 2002-1674 disconnect/test terminal block.

With a 2.5 mm² nominal conductor cross-section, 16 A IEC rated current, 400 V IEC rated voltage and compact 5.2 mm width, the WAGO 2002-1974 is suitable for a wide range of industrial control and instrumentation applications. Its distinctive blue housing also supports identification in appropriately designed Ex i intrinsically safe installations, subject to the relevant certification and installation requirements.

Key Advantages

  • Integrated orange knife-disconnect link provides a clearly identifiable circuit separation mechanism.
  • Additional jumper position offers greater flexibility for compatible cross-connection arrangements.
  • 2-conductor disconnect/test configuration supports circuit testing and troubleshooting.
  • Push-in CAGE CLAMP® technology provides secure, screwless conductor termination.
  • 16 A IEC rated current for suitable industrial control circuits.
  • 400 V IEC rated voltage supports a wide range of industrial electrical applications.
  • 6 kV rated impulse voltage for the specified insulation coordination conditions.
  • 2.5 mm² nominal conductor cross-section accommodates common control wiring sizes.
  • Accepts suitable solid and fine-stranded copper conductors from 0.25–4 mm².
  • 5.2 mm terminal width supports high-density DIN rail installations.
  • Blue insulating housing supports visual identification of designated circuit groups.
  • Compact 72.9 mm depth accommodates the additional jumper arrangement.
  • Compatible with DIN 35 × 7.5 mm and DIN 35 × 15 mm mounting rails.
  • Suitable for selected Ex i applications when the complete installation meets the applicable requirements.

Key Features

  • WAGO TOPJOB® S 2002 Series disconnect/test terminal block.
  • 2-conductor configuration.
  • Orange knife-disconnect link.
  • Additional jumper position for compatible cross-connections.
  • Disconnect/test function for electrical circuit investigation.
  • Two conductor connection points.
  • Two electrical potentials when the disconnect path is open.
  • Single-level terminal block design.
  • Push-in CAGE CLAMP® spring-pressure connection technology.
  • 2.5 mm² nominal conductor cross-section.
  • 16 A IEC rated current.
  • 400 V IEC rated voltage.
  • 6 kV rated impulse voltage.
  • Suitable for solid and fine-stranded copper conductors.
  • 0.25–4 mm² conductor connection range.
  • 10–12 mm conductor strip length.
  • Front-entry wiring arrangement.
  • 5.2 mm width.
  • 32.9 mm height from the upper edge of the DIN rail.
  • 72.9 mm depth.
  • Blue polyamide 66 insulating housing.
  • UL 94 V-0 material flammability classification.
  • Centre and side marking positions.
  • DIN 35 rail mounting.
  • Suitable for selected intrinsically safe applications, subject to applicable certification and installation conditions.

Additional Jumper Position for Flexible Circuit Distribution

One of the defining features of the WAGO 2002-1974 is its additional jumper position. This provides an extra location for compatible TOPJOB® S jumper accessories, supporting more flexible electrical connection arrangements within suitable terminal block assemblies.

In industrial control panels, jumper systems are commonly used to distribute shared electrical potentials between adjacent terminal blocks. An additional jumper position can be particularly useful when engineers need to organise circuit distribution alongside disconnect/test functionality.

The WAGO 2002-1974 combines this extra jumper provision with a knife-disconnect mechanism, allowing the terminal block to support both appropriate cross-connection arrangements and circuit separation procedures.

Jumper compatibility, permitted connection configurations and electrical ratings must be checked against WAGO's current accessory documentation. The presence of an additional jumper position does not mean that every jumper accessory or circuit arrangement is suitable.

Integrated Knife-Disconnect Function for Circuit Testing

The orange knife-disconnect link allows the electrical connection between the terminal block's two conductor terminals to be opened without removing the connected wires.

This is useful during electrical commissioning, troubleshooting and maintenance, when technicians may need to separate a circuit into distinct sections for appropriate measurement or investigation.

When the disconnect link is closed, the terminal block provides the intended conductive path between its connection points. Opening the link separates the circuit sections, subject to the configuration of any installed jumpers and connected wiring.

The disconnect function must be operated according to the manufacturer's instructions. The WAGO 2002-1974 should not be assumed to provide a safety-rated isolator, a lockable isolation function or load-breaking capability unless the intended use is expressly supported by the applicable technical documentation.

For applications requiring a mechanical interlock, the related WAGO 2002-1974/401-000 is a separate configuration specifically identified by WAGO as incorporating that feature.

Reliable Push-in CAGE CLAMP® Conductor Connections

The WAGO 2002-1974 uses Push-in CAGE CLAMP® technology, providing spring-pressure conductor termination without conventional screw connections.

This technology is designed to maintain consistent contact pressure, helping support reliable electrical performance in industrial environments where vibration and temperature variation may be present.

The terminal block accepts suitable 0.25–4 mm² solid and fine-stranded copper conductors. Suitable solid conductors from 0.75–4 mm² can be inserted directly, while fine-stranded conductors can be connected using the appropriate conductor preparation and operating method.

The specified 10–12 mm strip length and front-entry wiring arrangement support straightforward installation. The terminal block's 5.2 mm width also helps conserve space in densely populated DIN rail assemblies.

Blue Terminal Block for Suitable Ex i Applications

The WAGO 2002-1974 is identified by WAGO as suitable for selected Ex i intrinsically safe applications. Its blue insulating housing supports visual identification of designated intrinsically safe circuit arrangements.

However, a blue terminal block does not independently make a circuit intrinsically safe. The complete installation must meet the relevant equipment certification, electrical parameter limitations, circuit segregation requirements and applicable hazardous-area standards.

Before using the WAGO 2002-1974 in a hazardous-area installation, engineers should consult the current manufacturer documentation and relevant certificates to confirm suitability for the intended application.

Typical Applications

  • Industrial electrical control panels and automation cabinets.
  • PLC input and output circuit testing.
  • Industrial instrumentation and measurement circuits.
  • Electrical control circuit disconnection and troubleshooting.
  • Control panel commissioning and functional testing.
  • Signal wiring and industrial electrical maintenance.
  • Machine building and OEM automation equipment.
  • DIN rail-mounted disconnect/test terminal assemblies.
  • Control circuits requiring compatible jumper connections.
  • Process automation and industrial control systems.
  • Appropriately designed intrinsically safe instrumentation circuits.
  • Maintenance and expansion of WAGO TOPJOB® S terminal block installations.

Technical Specifications

Tick the specs you need, then view products that match.

Current 16 A
Voltage 400 V
Terminal Type Disconnect / Test
Colour Blue
Connection Spring clamp
Number of Connection Points 2
Number of Levels 1
Product Series WAGO TOPJOB S
Internally connected stages Yes
Connectable conductor cross section fine-strand with cable end sleeve 0.75 – 2.5 mm²
Number of clamp positions per level 2
Height 72.9 mm
Operating temperature 105 – 105 °C
Flammability class of insulation material according to UL 94 V0
Rated current In 16 A
Connectable conductor cross section fine-strand without cable end sleeve 0.25 – 4 mm²
Rated voltage 400 V
Width 5.2 mm
Number of levels 1
Material insulation body Thermoplastic
Type of electrical connection 2 Spring clamp connection
Type of electrical connection 1 Spring clamp connection
Closing plate required Yes
Colour Blue
Connectable conductor cross section multi-wired 0.25 – 2.5 mm²
Connectable conductor cross section solid-core 0.75 – 4 mm²
Type of cross disconnection None
Depth 32.9 mm
Type of slitting None
Mounting method DIN rail (top hat rail) 35 mm
Manufacturer WAGO
Series TOPJOB® S / 2002 Series
Manufacturer part number 2002-1974
Product type 2-conductor disconnect/test terminal block
Main function Disconnect terminal block for test and measurement
Disconnect mechanism Orange knife-disconnect link
Additional jumper position Yes
Mechanical interlock Not specified for this standard version
Connection technology Push-in CAGE CLAMP®
Nominal conductor cross-section 2.5 mm²
Rated current (IEC) 16 A
Rated voltage (IEC) 400 V
Rated impulse voltage 6 kV
Overvoltage category III
Pollution degree 3
Rated current (UL) 15 A
Rated voltage (UL) 300 V
Number of conductor connection points 2
Number of electrical potentials 2
Solid conductor cross-section 0.25–4 mm²
Solid conductor direct push-in range 0.75–4 mm²
Fine-stranded conductor cross-section 0.25–4 mm²
Fine-stranded conductor with ferrule 0.75–2.5 mm²
Conductor size range 22–12 AWG
Conductor material Copper
Conductor strip length 10–12 mm
Wiring direction Front-entry
Actuation type Operating tool
Mounting type DIN 35 rail
Compatible mounting rails DIN 35 × 7.5 mm and DIN 35 × 15 mm
Height from upper edge of DIN rail 32.9 mm
Weight Approximately 8.3 g
Housing colour Blue
Disconnect link colour Orange
Insulation material Polyamide 66 (PA66)
Flammability classification UL 94 V-0
Fire load 0.173 MJ
Marking positions Centre and side
Explosion protection suitability Selected Ex i applications, subject to certification conditions
Manufacturer packaging unit 50 pieces

Frequently Asked Questions

What is the WAGO 2002-1974 used for?

The WAGO 2002-1974 is a blue 2-conductor disconnect/test terminal block with an additional jumper position. It is designed for circuit connection, testing and controlled disconnection in industrial automation and instrumentation systems. Its orange knife-disconnect link allows the conductive path between the two conductor terminals to be opened without removing the connected wires.

What is the difference between the WAGO 2002-1674 and 2002-1974?

Both are blue 2-conductor disconnect/test terminal blocks from the WAGO TOPJOB® S 2002 Series. The key difference is that the WAGO 2002-1974 includes an additional jumper position. It also has a longer profile, measuring 72.9 mm deep, compared with the shorter WAGO 2002-1674 arrangement.

What are the electrical ratings of the WAGO 2002-1974?

The WAGO 2002-1974 has a 16 A IEC rated current, 400 V IEC rated voltage and 6 kV rated impulse voltage. Its UL ratings are 15 A and 300 V. Applicable circuit and installation-specific limits must also be observed.

What conductor sizes can the WAGO 2002-1974 accommodate?

The terminal block has a nominal conductor cross-section of 2.5 mm² and accepts suitable solid and fine-stranded copper conductors from 0.25–4 mm². Suitable solid conductors from 0.75–4 mm² can be connected using direct push-in termination. The specified conductor strip length is 10–12 mm.

Can the WAGO 2002-1974 be used in intrinsically safe circuits?

Yes. WAGO identifies the 2002-1974 as suitable for selected Ex i intrinsically safe applications. The blue housing supports circuit identification, but intrinsic safety depends on the complete electrical system, applicable certification, electrical parameters and correct installation.

Trusted by Electrical Engineers and Automation Professionals Worldwide

WAGO TOPJOB® S disconnect/test terminal blocks combine reliable spring-pressure conductor connections with practical circuit testing functionality. The WAGO 2002-1974 adds an extra jumper position to its compact two-conductor design, providing electrical engineers with greater flexibility when organising control circuits, commissioning industrial equipment and maintaining instrumentation systems.

Technical reference: WAGO official product page – 2002-1974. Confirm application-specific ratings, jumper compatibility and hazardous-area approvals against the current manufacturer documentation.