Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.83
The WAGO 2002-1972 is a compact and reliable 2-conductor disconnect/test terminal block designed for electrical circuit separation, testing and measurement in industrial control panels and electrical distribution systems. As part of the established WAGO TOPJOB® S 2002 series, it features Push-in CAGE CLAMP® connection technology for secure conductor termination and efficient installation.
This terminal block incorporates a knife-type disconnect mechanism with an orange disconnect link and an additional jumper position. These features allow convenient circuit separation for testing, troubleshooting and maintenance without removing connected conductors. Its compact construction supports organised electrical wiring in space-constrained control cabinets.
With a 2.5 mm² nominal conductor cross-section, a 5.2 mm terminal width and a distinctive orange insulating housing, the WAGO 2002-1972 is suitable for industrial automation, instrumentation and electrical control applications. Its compatibility with standard 35 mm DIN rails enables straightforward integration into modular terminal block assemblies.
Disconnect/test terminal blocks such as the WAGO 2002-1972 provide a practical method of separating electrical circuits for inspection, measurement and maintenance. The integrated knife disconnect allows the electrical connection to be opened without removing the installed conductors, supporting efficient fault finding and commissioning procedures. The disconnect function does not replace appropriate electrical isolation and verification procedures.
The WAGO TOPJOB® S series is designed for dependable electrical connections and efficient industrial panel wiring. Its Push-in CAGE CLAMP® technology uses spring-pressure termination to maintain secure conductor contact, while the compact DIN-rail format simplifies installation in automation cabinets. The additional jumper position provides flexibility when configuring control and measurement circuits.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 400 V | |
| Terminal Type | Disconnect / Test | |
| Colour | Orange | |
| Connection | Spring clamp | |
| Number of Connection Points | 2 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Internally connected stages | Yes | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 72.9 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 4 mm² | |
| Rated voltage | 400 V | |
| Width | 5.2 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Orange | |
| Connectable conductor cross section multi-wired | 0.25 – 2.5 mm² | |
| Connectable conductor cross section solid-core | 0.75 – 4 mm² | |
| Type of cross disconnection | None | |
| Depth | 32.9 mm | |
| Type of slitting | None | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2002 | |
| Model | 2002-1972 | |
| Product type | Disconnect/test terminal block | |
| Main function | Electrical circuit connection and disconnection for testing and measurement | |
| Disconnect mechanism | Knife disconnect | |
| Disconnect link colour | Orange | |
| Number of conductors | 2 | |
| Number of connection points | 2 | |
| Nominal cross-section | 2.5 mm² | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductor material | Copper | |
| Connection direction | Front entry | |
| Jumper provision | Additional jumper position | |
| Mounting type | DIN-35 rail | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Terminal width | 5.2 mm | |
| Housing colour | Orange | |
| Insulating material | Polyamide | |
| Terminal arrangement | Single-level disconnect terminal block | |
| Product family | WAGO TOPJOB® S rail-mount terminal blocks |
The WAGO 2002-1972 is a 2-conductor disconnect/test terminal block used to connect and separate electrical circuits for testing, troubleshooting and maintenance in industrial control panels and instrumentation systems.
The terminal block has a 2.5 mm² nominal conductor cross-section and uses WAGO Push-in CAGE CLAMP® technology for secure copper conductor termination.
The terminal block incorporates a knife-type disconnect mechanism with an orange disconnect link, allowing the circuit connection to be opened for testing or maintenance without removing the connected conductors.
Both products belong to the WAGO TOPJOB® S 2002 series and provide 2-conductor disconnect/test functionality with Push-in CAGE CLAMP® connections. The 2002-1972 has an orange housing, whereas the 2002-1971 has a grey housing.
The terminal block mounts onto a 35 mm DIN rail, including 35 × 7.5 mm and 35 × 15 mm profiles. Its compact 5.2 mm width and front-entry Push-in CAGE CLAMP® connections support efficient installation in electrical control cabinets.
WAGO TOPJOB® S terminal blocks are widely used by electrical engineers, control panel builders and industrial automation professionals for reliable conductor termination, efficient panel wiring and practical circuit testing. The WAGO 2002-1972 combines compact construction, spring-pressure connection technology and convenient disconnect functionality for industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.