Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.80
The WAGO 2002-1971 is a 2-conductor disconnect/test terminal block featuring an orange disconnect link and an additional jumper position. Designed for industrial control panels, automation systems and electrical distribution assemblies, this grey terminal block combines convenient circuit disconnection and testing with WAGO's reliable Push-in CAGE CLAMP® connection technology.
Part of the WAGO TOPJOB S 2002 Series, the 2002-1971 provides a 2.5 mm² nominal conductor cross-section, 400 V IEC nominal voltage and 16 A IEC rated current. Its two conductor connections are arranged on a single level, with the orange disconnect link providing a means of opening the electrical connection for appropriate testing and maintenance procedures.
The integrated additional jumper position enables compatible WAGO bridging accessories to be incorporated into terminal strip layouts. With a compact 5.2 mm width and compatibility with standard 35 mm DIN rails, the WAGO 2002-1971 is particularly useful where space-efficient wiring, accessible test points and organised circuit separation are required.
The WAGO 2002-1971 combines two conductor connection points with an integrated orange disconnect link. In the closed position, the disconnect mechanism establishes electrical continuity between the two sides of the terminal. When opened, the link separates the connection, allowing appropriate circuit testing and diagnostic procedures to be carried out.
The integrated test option enables compatible testing accessories to be used for electrical measurements. This makes the WAGO 2002-1971 particularly useful in industrial control systems where engineers need convenient access to individual circuit connections during commissioning, troubleshooting and maintenance.
An additional jumper position provides further flexibility when constructing terminal strips. Compatible WAGO jumper accessories can be used to establish approved electrical cross-connections between terminals. Jumper placement must be selected carefully so that the intended disconnect function is not bypassed.
WAGO's Push-in CAGE CLAMP® technology delivers reliable spring-pressure conductor termination without conventional terminal screws. Suitable solid conductors and correctly prepared fine-stranded conductors with ferrules can be inserted directly, while other permissible conductor types can be connected using the appropriate operating tool.
With a 400 V IEC nominal voltage, 16 A IEC rated current and 5.2 mm width, the WAGO 2002-1971 provides a compact solution for industrial circuit separation and testing. The disconnect link is not a substitute for an approved isolation device, and appropriate safe isolation procedures must always be followed before electrical maintenance.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 400 V | |
| Terminal Type | Disconnect / Test | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 2 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 72.9 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 4 mm² | |
| Rated voltage | 400 V | |
| Width | 5.2 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.25 – 2.5 mm² | |
| Connectable conductor cross section solid-core | 0.75 – 4 mm² | |
| Type of cross disconnection | None | |
| Depth | 32.9 mm | |
| Type of slitting | None | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Manufacturer part number | 2002-1971 | |
| Series | TOPJOB S 2002 Series | |
| Product type | Disconnect/test terminal block | |
| Disconnect mechanism | Knife-type disconnect link | |
| Disconnect link colour | Orange | |
| Number of conductor connection points | 2 | |
| Number of electrical potentials | 2 | |
| Additional jumper position | Yes | |
| Test option | Integrated | |
| Nominal conductor cross-section | 2.5 mm² | |
| IEC nominal voltage | 400 V | |
| IEC rated current | 16 A | |
| Rated impulse withstand voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| UL rated voltage | 300 V | |
| UL rated current | 15 A | |
| Conductor size range | 22–12 AWG | |
| Solid conductor range | 0.25–4 mm² | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Fine-stranded conductor range | 0.25–4 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–2.5 mm² | |
| Fine-stranded conductor with ferrule, direct push-in | 1–2.5 mm² | |
| Connectable conductor material | Copper | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation type | Push-in / operating tool | |
| Wiring direction | Front entry | |
| Conductor stripping length | 10–12 mm | |
| Mounting type | DIN-35 rail | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Design | Horizontal | |
| Overall profile height | 72.9 mm | |
| Depth from upper edge of DIN rail | 32.9 mm | |
| Housing colour | Grey | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Marking positions | Centre and side | |
| Operating temperature range | −60 to +105 °C | |
| Applicable terminal block standard | IEC/EN 60947-7-1 | |
| ATEX certification reference | KIWA 17 ATEX 0030 U | |
| IECEx certification reference | KIWA 17.0014U | |
| Approximate weight | 8.312 g | |
| Manufacturer standard packaging | 50 pieces |
The WAGO 2002-1971 is a two-conductor disconnect/test terminal block used to provide accessible circuit separation and testing in industrial electrical control panels, automation cabinets and DIN-rail terminal assemblies.
Yes. The terminal block includes an orange knife-type disconnect link that can be opened to separate the electrical connection between its two conductor terminals.
The terminal block provides two conductor connection points on a single level, with two electrical potentials associated with the disconnect arrangement.
Yes. The WAGO 2002-1971 features an additional jumper position for use with compatible WAGO bridging accessories.
The WAGO 2002-1971 has a 400 V IEC nominal voltage and a 300 V UL rated voltage.
The terminal block has a 16 A IEC rated current and a 15 A UL rated current.
The terminal block has a 2.5 mm² nominal conductor cross-section and accepts suitable solid and fine-stranded copper conductors from 0.25–4 mm². Direct push-in conductor ranges depend on conductor construction and preparation.
The WAGO 2002-1971 uses Push-in CAGE CLAMP® technology, providing secure spring-pressure conductor connections without conventional terminal screws.
The WAGO 2002-1961 is a carrier terminal block intended for compatible plug-in components, while the WAGO 2002-1971 is a disconnect/test terminal block supplied with an integrated orange disconnect link. Both feature two conductor connections and an additional jumper position.
Yes. The terminal block supports testing using compatible WAGO test accessories, making it suitable for circuit measurement and diagnostic applications.
The terminal block is designed for standard 35 mm DIN rails, including 35 × 7.5 mm and 35 × 15 mm profiles.
The terminal block measures 5.2 mm wide, with an overall profile height of 72.9 mm and a depth of 32.9 mm from the upper edge of the DIN rail.
No. The integrated disconnect link is intended for terminal-level circuit separation and testing. It must not replace an appropriately rated and approved isolation device where one is required.
WAGO TOPJOB S terminal blocks are widely used in professional electrical assemblies where reliable connections, organised wiring and convenient maintenance access are essential. The WAGO 2002-1971 combines an orange disconnect link, integrated test capability, an additional jumper position and Push-in CAGE CLAMP® technology in a compact grey DIN-rail housing, providing a practical solution for industrial circuit testing and separation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.