Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.83
The WAGO 2002-1971/401-000 is a compact and reliable 2-conductor disconnect/test terminal block designed for electrical circuit isolation, testing and measurement in industrial control panels and electrical distribution systems. As part of the established WAGO TOPJOB® S 2002 series, it features Push-in CAGE CLAMP® connection technology, providing secure conductor termination and efficient wiring installation.
This terminal block incorporates a knife-type disconnect mechanism with mechanical interlock, an orange disconnect link and an additional jumper position. These features provide convenient circuit separation for testing and maintenance while supporting organised electrical panel wiring. Its compact 5.2 mm width helps maximise available space on DIN rails.
With a 2.5 mm² nominal conductor cross-section, an IEC rated voltage of 400 V and a rated current of 16 A, the WAGO 2002-1971/401-000 is suitable for industrial control, instrumentation and electrical measurement circuits. Its grey polyamide housing and compatibility with standard 35 mm DIN rails make it a practical choice for professional electrical installations.
Disconnect/test terminal blocks such as the WAGO 2002-1971/401-000 provide a convenient means of separating electrical circuits for inspection, measurement and maintenance. The integrated knife disconnect enables an electrical connection to be opened at the terminal block, reducing the need to remove connected conductors during routine testing. Appropriate isolation and verification procedures must still be followed before electrical maintenance.
The WAGO TOPJOB® S series is designed for efficient industrial wiring and dependable electrical connections. Its Push-in CAGE CLAMP® technology uses spring-pressure termination to maintain secure conductor contact without conventional screw tightening. Combined with DIN-rail mounting, additional jumper functionality and compact construction, the 2002-1971/401-000 supports organised electrical control cabinets, instrumentation panels and automation systems.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 400 V | |
| Terminal Type | Disconnect / Test | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 2 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Internally connected stages | Yes | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 72.9 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 4 mm² | |
| Rated voltage | 400 V | |
| Width | 5.2 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.25 – 2.5 mm² | |
| Connectable conductor cross section solid-core | 0.75 – 4 mm² | |
| Type of cross disconnection | None | |
| Depth | 32.9 mm | |
| Type of slitting | None | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2002 | |
| Model | 2002-1971/401-000 | |
| Product type | Disconnect/test terminal block | |
| Disconnect mechanism | Knife disconnect with mechanical interlock | |
| Disconnect link colour | Orange | |
| Number of conductors | 2 | |
| Number of connection points | 2 | |
| Nominal cross-section | 2.5 mm² | |
| Rated voltage (IEC) | 400 V | |
| Rated current (IEC) | 16 A | |
| Rated impulse voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL, Use Groups B/C) | 300 V | |
| Rated current (UL, Use Groups B/C) | 15 A | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductor material | Copper | |
| Solid conductor cross-section | 0.25–4 mm² | |
| Fine-stranded conductor cross-section | 0.25–4 mm² | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Conductor stripping length | 10–12 mm | |
| Wiring direction | Front entry | |
| Mounting type | DIN-35 rail | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Terminal width | 5.2 mm | |
| Height above DIN rail | 32.9 mm | |
| Housing colour | Grey | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Marking positions | Centre and side | |
| Approximate weight | 8.43 g |
The WAGO 2002-1971/401-000 is a 2-conductor disconnect/test terminal block used to connect, separate and test electrical circuits in industrial control panels, instrumentation systems and automation equipment.
The terminal block has an IEC rated voltage of 400 V and a rated current of 16 A. Its UL Use Group B and C ratings are 300 V and 15 A.
The terminal block has a 2.5 mm² nominal cross-section and accommodates solid and fine-stranded copper conductors from 0.25–4 mm², with direct push-in suitability depending on conductor construction and preparation.
The terminal block features a knife-type disconnect with mechanical interlock and an orange disconnect link, allowing the circuit connection to be opened for testing or maintenance without disconnecting the installed conductors.
The terminal block mounts onto a 35 mm DIN rail, including 35 × 7.5 mm and 35 × 15 mm profiles. Its Push-in CAGE CLAMP® connection system supports efficient front-entry conductor installation inside electrical control panels.
WAGO TOPJOB® S terminal blocks are widely used by electrical engineers, control panel builders and industrial automation professionals for reliable conductor termination, efficient panel wiring and convenient electrical circuit testing. The WAGO 2002-1971/401-000 combines compact construction, spring-pressure connection technology and practical disconnect functionality for demanding industrial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.