Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.24
The WAGO 2002-1871/401-000 is a compact, reliable 4-conductor disconnect/test terminal block with mechanical interlock, designed for secure electrical connections, circuit isolation and testing in industrial control panels and electrical distribution systems. Part of the renowned WAGO TOPJOB® S 2002 series, this terminal block combines Push-in CAGE CLAMP® spring pressure connection technology with an integrated orange disconnect link and dedicated testing functionality.
Engineered for efficient installation and maintenance, the WAGO 2002-1871/401-000 allows electrical circuits to be disconnected and tested without removing connected conductors. Its mechanical interlock provides additional operational security, while the Push-in CAGE CLAMP® system delivers reliable, vibration-resistant electrical connections without conventional screw terminals. The compact grey housing is suitable for high-density terminal arrangements in industrial automation and electrical control cabinets.
With a 2.5 mm² nominal conductor cross-section, 400 V IEC nominal voltage and 16 A IEC rated current, this disconnect/test terminal block is suitable for industrial control and measurement circuits. Its 5.2 mm width and compatibility with 35 mm DIN rails support efficient panel layouts while providing accessible circuit isolation and testing facilities.
Disconnect/test terminal blocks provide an accessible method of separating electrical circuits for inspection, testing and maintenance. The WAGO 2002-1871/401-000 incorporates a knife-type disconnect mechanism with an orange disconnect link, allowing technicians to interrupt the relevant circuit path while retaining the connected wiring. The integrated mechanical interlock provides additional operational security during the disconnect process.
WAGO's Push-in CAGE CLAMP® technology uses spring pressure to maintain electrical contact with correctly prepared conductors. This eliminates the need for routine screw-terminal retightening and helps maintain dependable connections in industrial environments where vibration and temperature changes may occur. Suitable solid conductors and appropriately prepared stranded conductors can be connected efficiently, helping reduce wiring time during control panel assembly.
The terminal block's integrated testing option supports electrical measurement, circuit verification and fault diagnosis. Its four conductor connection points provide flexible wiring arrangements, while the slim 5.2 mm profile enables multiple terminal blocks to be installed in compact DIN rail assemblies. The mechanical interlock and disconnect arrangement must be operated according to WAGO's installation instructions and the applicable electrical safety procedures.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 400 V | |
| Terminal Type | Disconnect / Test | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 4 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Number of clamp positions per level | 4 | |
| Height | 87.5 mm | |
| Operating temperature | 105 – 105 °C | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 4 mm² | |
| Rated voltage | 400 V | |
| Width | 5.2 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.25 – 2.5 mm² | |
| Connectable conductor cross section solid-core | 0.75 – 4 mm² | |
| Type of cross disconnection | None | |
| Depth | 32.9 mm | |
| Type of slitting | None | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Series | TOPJOB® S 2002 | |
| Model | 2002-1871/401-000 | |
| Product type | Disconnect/test terminal block | |
| Terminal configuration | 4-conductor | |
| Number of clamping points | 4 | |
| Number of potentials | 2 | |
| Connection technology | Push-in CAGE CLAMP® | |
| Disconnect type | Knife disconnect with mechanical interlock | |
| Disconnect link colour | Orange | |
| Housing colour | Grey | |
| Nominal conductor cross-section | 2.5 mm² | |
| Conductor connection range | 0.25–4 mm² | |
| Conductor range (AWG) | 22–12 AWG | |
| Nominal voltage (IEC) | 400 V | |
| Rated current (IEC) | 16 A | |
| Rated surge voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL) | 300 V | |
| Rated current (UL) | 15 A | |
| Conductor entry | Front-entry wiring | |
| Recommended stripping length | 10–12 mm | |
| Mounting type | DIN rail mounting | |
| Compatible DIN rails | 35 × 7.5 mm / 35 × 15 mm | |
| Dimensions (W × D × H) | 5.2 × 32.9 × 87.5 mm | |
| Weight | Approximately 9.8 g | |
| Insulation material | Polyamide (PA) | |
| Flammability classification | UL 94 V-0 | |
| Applicable terminal block standard | IEC/EN 60947-7-1 | |
| Packaging unit | 50 pieces |
The WAGO 2002-1871/401-000 is a four-conductor disconnect/test terminal block used for connecting, isolating and testing electrical circuits in industrial control panels, automation systems and electrical distribution assemblies.
The terminal block has an IEC nominal voltage of 400 V and an IEC rated current of 16 A. Its UL ratings are 300 V and 15 A for the applicable use groups.
The terminal block has a 2.5 mm² nominal cross-section and supports suitable conductors within the 0.25–4 mm² connection range. Conductor preparation and termination must follow the manufacturer's specifications.
The mechanical interlock provides additional operational security for the knife-type disconnect mechanism. It is a distinguishing feature of the 2002-1871/401-000 variant and supports controlled operation of the disconnect function.
Yes. The WAGO 2002-1871/401-000 includes a dedicated testing option that allows compatible test equipment and accessories to be used for circuit measurement and verification without removing the connected conductors.
It uses WAGO Push-in CAGE CLAMP® spring pressure technology, which provides secure conductor connections without conventional screw terminals and supports efficient wiring during panel assembly.
The terminal block is designed for standard 35 × 7.5 mm and 35 × 15 mm DIN rails, making it suitable for installation in industrial electrical cabinets and control panels.
Both products are four-conductor disconnect/test terminal blocks from the WAGO TOPJOB® S 2002 series with an orange disconnect link. The 2002-1871/401-000 version additionally incorporates a mechanical interlock.
The WAGO 2002-1871/401-000 measures approximately 5.2 × 32.9 × 87.5 mm (width × depth × height), providing a compact solution for high-density DIN rail terminal assemblies.
WAGO TOPJOB® S terminal blocks are widely specified for industrial control panels and electrical installations where reliable spring pressure connections, efficient wiring and accessible maintenance are essential. The WAGO 2002-1871/401-000 combines compact four-conductor termination with a mechanical interlock, orange disconnect link and integrated testing functionality to support dependable circuit isolation and electrical testing.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.