Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.19
The WAGO 2002-1801 is a grey 4-conductor through terminal block with an integrated test option, designed for reliable electrical connections in industrial control panels, automation systems and electrical distribution assemblies. Part of the WAGO TOPJOB S 2002 series, it uses Push-in CAGE CLAMP® technology to provide secure, screwless conductor termination.
Featuring four conductor connection points sharing one electrical potential, the WAGO 2002-1801 enables multiple conductors to be connected within a compact terminal assembly. Its integrated test option provides convenient circuit access using compatible testing accessories, while its profile matches the corresponding 4-conductor disconnect terminal block for consistent terminal strip construction.
With a 2.5 mm² nominal conductor cross-section, 16 A IEC rated current, 400 V IEC nominal voltage and compact 5.2 mm width, the WAGO 2002-1801 is suitable for industrial control and automation applications. It accommodates appropriate copper conductors from 0.25–4 mm² and mounts onto standard 35 mm DIN rails.
The WAGO 2002-1801 provides a compact way to connect four conductors to a common electrical potential within an industrial control cabinet. This arrangement is useful for distributing control signals and creating organised connection points without installing multiple separate through terminals.
Its integrated test option supports electrical measurements during commissioning, inspection and fault-finding when used with compatible WAGO testing accessories. The matching profile of the corresponding 4-conductor disconnect terminal block also allows engineers to combine through and disconnect functions within a consistent terminal strip arrangement.
The Push-in CAGE CLAMP® system provides secure spring-pressure termination, while the 5.2 mm width helps maximise available DIN rail space. The WAGO 2002-1801 is a continuous through terminal rather than a disconnect device, so a suitable disconnect terminal must be selected where circuit isolation through the terminal is required.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 400 V | |
| Terminal Type | Feed-through | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 4 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Number of clamp positions per level | 4 | |
| Height | 87.5 mm | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | 105 – 105 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 4 mm² | |
| Width | 5.2 mm | |
| Rated voltage | 400 V | |
| Type of electrical connection 2 | Spring clamp connection | |
| Material insulation body | Thermoplastic | |
| Number of levels | 1 | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Explosion-tested version 'Ex e' | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.25 – 2.5 mm² | |
| Connectable conductor cross section solid-core | 0.75 – 4 mm² | |
| Depth | 32.9 mm | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Series | TOPJOB S 2002 | |
| Manufacturer part number | 2002-1801 | |
| Product type | 4-conductor through terminal block with test option | |
| Category | DIN rail feed-through terminal blocks | |
| Number of connection points | 4 | |
| Number of electrical potentials | 1 | |
| Applicable IEC/EN standard | IEC/EN 60947-7-1 | |
| Rated current (IEC/EN) | 16 A | |
| Nominal voltage (IEC/EN) | 400 V | |
| Rated impulse withstand voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL Use Groups B/C) | 300 V | |
| Rated current (UL Use Groups B/C) | 15 A | |
| Rated voltage (CSA Use Groups B/C) | 300 V | |
| Rated current (CSA Use Groups B/C) | 15 A | |
| Rated voltage (Ex e II) | 440 V | |
| Rated current (Ex e II) | 17 A | |
| Nominal conductor cross-section | 2.5 mm² | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation type | Push-in / operating tool | |
| Connectable conductor material | Copper | |
| Solid conductor range | 0.25–4 mm² (22–12 AWG) | |
| Solid conductor direct push-in range | 0.75–4 mm² (18–12 AWG) | |
| Fine-stranded conductor range | 0.25–4 mm² (22–12 AWG) | |
| Fine-stranded conductor with insulated ferrule | 0.25–2.5 mm² (22–14 AWG) | |
| Fine-stranded conductor with ferrule, direct push-in | 1–2.5 mm² (18–14 AWG) | |
| Conductor stripping length | 10–12 mm | |
| Wiring direction | Front-entry | |
| Test connection | Integrated test option | |
| Design | Horizontal terminal block | |
| Compatible DIN rails | 35 × 7.5 mm and 35 × 15 mm | |
| Overall height | 87.5 mm | |
| Depth from upper edge of DIN rail | 32.9 mm | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Marking positions | Centre and side | |
| Operating temperature range | −60 to +105 °C | |
| ATEX certificate | KIWA 17 ATEX 0030 U | |
| IECEx certificate | KIWA 17.0014U | |
| Fire load | 0.192 MJ | |
| Weight | Approximately 9.873 g | |
| Manufacturer standard packaging unit | 50 pieces | |
| GTIN | 4045454974671 |
The WAGO 2002-1801 is a grey 4-conductor through terminal block with an integrated test option. It connects four conductors to one electrical potential in industrial control panels, automation systems and DIN rail terminal assemblies.
The WAGO 2002-1801 has a 16 A rated current, 400 V nominal voltage and 6 kV rated impulse withstand voltage under IEC/EN conditions. Its UL Use Group B/C ratings are 300 V and 15 A.
The terminal block has a 2.5 mm² nominal conductor cross-section and accommodates suitable solid and fine-stranded copper conductors from 0.25–4 mm². The specified stripping length is 10–12 mm.
Yes. The WAGO 2002-1801 includes an integrated test option for accessing the electrical circuit with compatible WAGO testing accessories. It also has the same profile as the corresponding 4-conductor disconnect terminal block.
No. The WAGO 2002-1801 is a through terminal block, meaning its four conductor connections share one continuous electrical potential. Its integrated test option does not provide a disconnect function; a suitable disconnect terminal block is required where circuit isolation through the terminal is needed.
WAGO TOPJOB S terminal blocks support reliable, organised and maintainable electrical installations for industrial automation specialists, machine builders and control panel manufacturers. The WAGO 2002-1801 combines four-conductor connectivity, an integrated test option, Push-in CAGE CLAMP® technology and a compact DIN rail footprint to meet the practical demands of professional industrial control wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.