Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
WAGO 2002-1611 is a grey TOPJOB S 2-conductor Push-in CAGE CLAMP fused terminal block with a pivoting holder for 5 x 20 mm miniature metric fuses, a 2.5 mm² nominal cross-section and 250 V 6.3 A IEC/EN ratings.
£3.10
The WAGO 2002-1611 is a 2-conductor fuse terminal block from the TOPJOB® S 2002 Series, designed to provide convenient circuit protection and conductor termination within industrial control panels, machinery and electrical distribution systems. It combines WAGO's Push-in CAGE CLAMP® connection technology with an integrated pivoting fuse holder and end plate in a compact grey DIN rail-mounted format.
Designed for standard 5 × 20 mm miniature metric fuses, the pivoting fuse holder provides convenient access to the protective fuse while forming part of the terminal block assembly. This standard 2002-1611 version is supplied without blown-fuse indication, making it suitable for applications where straightforward fused circuit protection is required without an integrated LED status indicator.
The terminal has a nominal cross-section of 2.5 mm², accepts conductor cross-sections from 0.25 to 4 mm², and is rated at 250 V and 6.3 A according to IEC/EN 60947-7-3. Its slim 6.2 mm width and compatibility with both 35 × 7.5 mm and 35 × 15 mm DIN rails make it a space-efficient solution for protected control and distribution circuits.
The WAGO 2002-1611 integrates a fuse holder directly into the terminal block, allowing an individual control, signal or distribution circuit to be protected without requiring a separate panel-mounted fuse holder. The pivoting holder accepts a 5 × 20 mm fuse and provides convenient access when a fuse needs to be inspected or replaced.
WAGO's Push-in CAGE CLAMP® connection system allows suitable solid conductors and fine-stranded conductors with ferrules to be inserted directly, while other conductor types can be connected by operating the spring clamp with a suitable tool. This provides reliable spring-pressure contact while eliminating the periodic retightening associated with conventional screw-clamp terminals.
Tick the specs you need, then view products that match.
| Voltage | 250 V | |
|---|---|---|
| Current | 6.3 A | |
| Number of Connection Points | 2 | |
| Connection | Push-in | |
| Terminal Type | End plate / End stop (accessory) | |
| Conductor Size | 2.5 mm² | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Colour | Grey | |
| HS Code | 85369095 | |
| Country of Manufacture | China | |
| Manufacturer | WAGO | |
| Series | TOPJOB S / 2002 Series | |
| Model | 2002-1611 | |
| Manufacturer part number | 2002-1611 | |
| Product type | Fuse terminal block | |
| Terminal function | Fused / disconnect | |
| Number of conductors | 2 | |
| Number of connection points | 2 | |
| Number of levels | 1 | |
| Connection technology | Push-in CAGE CLAMP® | |
| Nominal cross-section | 2.5 mm² | |
| Conductor cross-section range | 0.25 to 4 mm² | |
| Conductor range | 12–18 AWG | |
| Stripping length | 10 to 12 mm | |
| Fuse holder type | Pivoting | |
| Fuse size | 5 × 20 mm miniature metric fuse | |
| Blown-fuse indication | No | |
| IEC/EN nominal voltage | 250 V | |
| IEC/EN rated current | 6.3 A | |
| UL voltage rating, Use Group B | 250 V | |
| UL current rating, Use Group B | 10 A | |
| CSA voltage rating, Use Group B | 250 V | |
| CSA current rating, Use Group B | 6.3 A | |
| Width | 6.2 mm | |
| Height | 66.1 mm | |
| Depth from upper edge of DIN rail | 57.2 mm | |
| DIN rail compatibility | 35 × 7.5 mm and 35 × 15 mm | |
| Colour | Grey | |
| Insulation material | Polyamide PA66 | |
| Processing temperature range | -35 to +85 °C | |
| Weight | approx. 13.2 g |
The WAGO 2002-1611 is a 2-conductor fused terminal block that combines conductor termination with a pivoting fuse holder for protecting circuits in industrial control panels, machinery and electrical distribution assemblies.
The terminal block is designed for a standard 5 × 20 mm miniature metric fuse installed in its integrated pivoting fuse holder.
No. The standard 2002-1611 is supplied without blown-fuse indication. WAGO offers related variants with LED blown-fuse indication for specified voltage ranges.
The 2002-1611 has a nominal voltage of 250 V and a rated current of 6.3 A according to IEC/EN 60947-7-3.
The terminal is designed for conductor cross-sections from 0.25 to 4 mm², with a nominal cross-section of 2.5 mm² and a stripping length of 10 to 12 mm.
The terminal block mounts onto standard 35 × 7.5 mm or 35 × 15 mm DIN rails, making it suitable for conventional industrial control-panel and switchgear assemblies.
WAGO TOPJOB S fuse terminal blocks combine proven spring-pressure connection technology with compact DIN rail-mounted circuit protection, providing panel builders, automation engineers and machine manufacturers with an efficient solution for protected industrial wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.