Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.09
The WAGO 2001-1211/1000-411 is a 2-conductor DIN rail component terminal block with an integrated 1N4007 diode. Part of the WAGO TOPJOB S 2001 series, it provides a compact solution for applications requiring a diode within an industrial control circuit, eliminating the need to mount and wire a separate discrete diode.
A key feature of this variant is its right-hand anode orientation. The built-in 1N4007 diode provides directional current conduction, making the terminal suitable for appropriately designed DC control circuits, signal isolation and diode-based circuit arrangements. The orientation is important because reversing the intended diode direction can change circuit behaviour.
Featuring Push-in CAGE CLAMP® connection technology, a 1.5 mm² nominal conductor cross-section and a compact 4.2 mm terminal width, the WAGO 2001-1211/1000-411 combines straightforward conductor termination with efficient DIN rail installation. The integrated diode has a 0.5 A rated current, a 250 V nominal voltage and a 1000 V reverse-voltage rating.
The WAGO 2001-1211/1000-411 incorporates a 1N4007 diode between its two conductor connections, with the anode positioned on the right-hand side. A diode normally conducts conventional current from anode to cathode when sufficiently forward-biased and blocks current in the opposite direction up to its specified reverse-voltage limit. This makes the terminal useful for circuit designs requiring directional conduction, such as certain DC signal isolation and diode logic arrangements. The actual circuit must be designed around the diode's 0.5 A rated current and other applicable electrical limits.
The Push-in CAGE CLAMP® connection system secures suitable copper conductors using spring pressure rather than terminal screws. Solid conductors and fine-stranded conductors with suitable ferrules can be connected using the specified push-in method, while an operating tool accommodates other permitted conductor types. The compact 4.2 mm housing mounts directly onto standard DIN 35 rails, allowing diode functions to be integrated neatly into a terminal strip. The internal diode means this is not an ordinary bidirectional feed-through terminal block, and the correct polarity must be confirmed before energising the circuit.
Tick the specs you need, then view products that match.
| Current | 0.5 A | |
|---|---|---|
| Voltage | 250 V | |
| Terminal Type | Component (diode/LED) | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 2 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 1.5 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 48.5 mm | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | 105 – 105 °C | |
| Rated current In | 0.5 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 2.5 mm² | |
| Rated voltage | 250 V | |
| Width | 4.2 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of component | Diode | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.25 – 1.5 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 2.5 mm² | |
| Depth | 32.9 mm | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Product family | TOPJOB S | |
| Series | 2001 | |
| Manufacturer part number | 2001-1211/1000-411 | |
| Product type | Component terminal block with diode | |
| Integrated component | 1N4007 diode | |
| Diode orientation | Anode on right-hand side | |
| Number of conductor connection points | 2 | |
| Rated current (IEC) | 0.5 A | |
| Nominal voltage | 250 V | |
| Reverse-voltage rating | 1000 V | |
| Rated current (UL, Use Group B) | 15 A | |
| Rated current (UL, Use Group C) | 15 A | |
| Nominal conductor cross-section | 1.5 mm² | |
| Solid conductor connection range | 0.25–2.5 mm² | |
| Fine-stranded conductor connection range | 0.25–2.5 mm² | |
| Solid conductor push-in range | 0.75–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with ferrule, push-in termination | 0.75–1.5 mm² | |
| Conductor size | 22–14 AWG | |
| Connectable conductor material | Copper | |
| Connection technology | Push-in CAGE CLAMP® | |
| Termination method | Screwless spring-pressure connection | |
| Actuation | Push-in / operating tool | |
| Conductor stripping length | 9–11 mm | |
| Wiring direction | Front entry | |
| Terminal width | 4.2 mm | |
| Terminal height | 48.5 mm | |
| Depth from upper edge of DIN rail | 32.9 mm | |
| Mounting type | DIN 35 rail | |
| Compatible rail sizes | 35 × 7.5 mm and 35 × 15 mm | |
| Terminal design | Horizontal | |
| Marking positions | Centre and side | |
| Housing colour | Grey | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Weight | Approx. 4.51 g | |
| GTIN / EAN | 4045454537555 |
The WAGO 2001-1211/1000-411 is a two-conductor DIN rail terminal block with an integrated 1N4007 diode. It is used in suitable electrical control circuits where directional current conduction is required without installing a separate diode component.
The integrated diode has its anode on the right-hand side. This orientation determines the direction of forward current conduction, so the terminal must be connected according to the intended circuit polarity.
The terminal incorporates a 1N4007 diode rated at 0.5 A, with a 250 V nominal voltage and 1000 V reverse-voltage rating. The diode's 0.5 A current limit must not be confused with the higher connection ratings listed under certain UL terminal approvals.
The terminal block has a 1.5 mm² nominal conductor cross-section and accepts suitable solid and fine-stranded copper conductors from 0.25 to 2.5 mm². The required stripping length is 9–11 mm.
Both are two-conductor TOPJOB S terminal blocks incorporating a 1N4007 diode. The 2001-1211/1000-411 has its anode on the right-hand side, while the 2001-1211/1000-410 has the opposite diode orientation. The correct version depends on the required circuit polarity.
WAGO TOPJOB S component terminal blocks provide a practical way to integrate electrical functions directly into DIN rail assemblies. The WAGO 2001-1211/1000-411 combines an integrated 1N4007 diode, clearly defined right-hand anode orientation and reliable Push-in CAGE CLAMP® connections to support organised, space-efficient industrial control panel wiring.
Manufacturer reference: WAGO 2001-1211/1000-411 component terminal block. Check the manufacturer's current technical documentation for diode polarity, current limits and application suitability before installation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.