Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.09
The WAGO 2001-1211/1000-410 is a compact 2-conductor diode terminal block featuring an integrated 1N4007 diode with the anode on the left side. Designed for industrial control and automation circuits, it combines a semiconductor component and conductor termination points in a single DIN rail-mounted assembly.
Part of the WAGO TOPJOB S 2001 Series, this grey component terminal block uses Push-in CAGE CLAMP® technology to provide secure, spring-loaded conductor connections. Its integrated diode enables directional current flow, making it useful for compatible control circuits requiring diode isolation, reverse-current blocking or signal separation.
With a 250 V nominal voltage, 1,000 V diode reverse-voltage rating and 500 mA maximum continuous current, the WAGO 2001-1211/1000-410 is designed for appropriately rated low-current electrical circuits. Its 4.2 mm width and standard DIN-35 rail mounting support compact, organised control cabinet installations.
The WAGO 2001-1211/1000-410 incorporates a 1N4007 semiconductor diode between its conductor connection points. The diode permits conventional current flow from its anode towards its cathode when forward-biased, while blocking current in the reverse direction within its specified electrical limits.
The anode is located on the left side of this terminal block, making polarity an important consideration during installation. Correct orientation is essential for applications involving signal isolation, reverse-current blocking and other diode-based control functions.
Its 500 mA maximum continuous current must be respected when designing the circuit. Although the integrated diode has a reverse-voltage rating of 1,000 V, this does not mean the complete terminal block is suitable for unrestricted operation at that voltage. The terminal's nominal voltage and all applicable circuit ratings must also be observed.
The Push-in CAGE CLAMP® connection system uses spring pressure to secure suitable copper conductors without conventional screw tightening. Solid conductors and appropriately ferruled fine-stranded conductors can be connected using the specified push-in method, while other supported conductor types can be installed with an operating tool.
With its compact 4.2 mm width, the WAGO 2001-1211/1000-410 allows diode functions to be integrated directly into a DIN rail terminal assembly, reducing the need for separate components and additional wiring in compatible industrial control applications.
Tick the specs you need, then view products that match.
| Current | 0.5 A | |
|---|---|---|
| Voltage | 250 V | |
| Terminal Type | Component (diode/LED) | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Number of Connection Points | 2 | |
| Number of Levels | 1 | |
| Product Series | WAGO TOPJOB S | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 1.5 mm² | |
| Number of clamp positions per level | 2 | |
| Height | 48.5 mm | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | 105 – 105 °C | |
| Rated current In | 0.5 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.25 – 2.5 mm² | |
| Rated voltage | 250 V | |
| Width | 4.2 mm | |
| Number of levels | 1 | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of component | Diode | |
| Type of electrical connection 1 | Spring clamp connection | |
| Closing plate required | Yes | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.25 – 1.5 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 2.5 mm² | |
| Depth | 32.9 mm | |
| Mounting method | DIN rail (top hat rail) 35 mm | |
| Manufacturer | WAGO | |
| Product series | TOPJOB S 2001 Series | |
| Manufacturer part number | 2001-1211/1000-410 | |
| Product type | Component terminal block with integrated diode | |
| Diode type | 1N4007 | |
| Diode polarity | Anode on left side | |
| Nominal voltage | 250 V | |
| Diode reverse voltage | 1,000 V | |
| Maximum continuous current | 500 mA | |
| Number of conductor connection points | 2 | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation type | Push-in / operating tool | |
| Nominal conductor cross-section | 1.5 mm² | |
| Solid conductor range | 0.25–2.5 mm² | |
| Fine-stranded conductor range | 0.25–2.5 mm² | |
| Solid conductor push-in range | 0.75–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with ferrule, push-in termination | 0.75–1.5 mm² | |
| Conductor size | 22–14 AWG | |
| Conductor material | Copper | |
| Stripping length | 9–11 mm | |
| Wiring direction | Front-entry | |
| Terminal width | 4.2 mm | |
| Terminal depth | 48.5 mm | |
| Height from upper edge of DIN rail | 32.9 mm | |
| Mounting type | DIN-35 rail | |
| Compatible DIN rail profiles | 35 × 7.5 mm and 35 × 15 mm | |
| Design | Horizontal | |
| Marking positions | Centre and side | |
| Housing colour | Grey | |
| Insulating material | Polyamide PA66 | |
| Flammability classification | UL 94 V-0 | |
| Continuous operating temperature | −60 to +105 °C | |
| Manufacturer standard packaging unit | 100 pieces | |
| Country of origin | China | |
| GTIN / EAN | 4045454537548 |
The WAGO 2001-1211/1000-410 is a 2-conductor terminal block containing an integrated 1N4007 diode. It is used in compatible industrial control circuits requiring directional current flow or diode isolation.
The terminal block contains an integrated 1N4007 diode, a silicon rectifier diode with a specified reverse-voltage rating of 1,000 V.
The anode is on the left side of the WAGO 2001-1211/1000-410. The diode orientation must be considered when connecting the terminal block into an electrical circuit.
The integrated diode terminal block has a maximum continuous current rating of 500 mA. This limit must be observed when selecting the product for an application.
The terminal block has a 250 V nominal voltage, while its integrated 1N4007 diode has a 1,000 V reverse-voltage rating. These are different specifications and must not be treated as interchangeable.
The terminal block accepts suitable solid and fine-stranded copper conductors from 0.25–2.5 mm², with a nominal conductor cross-section of 1.5 mm².
No. It uses Push-in CAGE CLAMP® spring pressure connections, which eliminate conventional terminal screws and support efficient conductor termination.
Yes. The terminal block is designed for 35 mm DIN rails, including compatible 35 × 7.5 mm and 35 × 15 mm mounting profiles.
The terminal block measures 4.2 mm wide and 48.5 mm deep, with a height of 32.9 mm measured from the upper edge of the DIN rail.
Not directly. Unlike an ordinary through terminal block, the WAGO 2001-1211/1000-410 contains an integrated diode that provides directional current flow. It should only be used where this electrical function is required and compatible with the circuit design.
WAGO TOPJOB S component terminal blocks provide practical solutions for integrating electrical functions directly into DIN rail assemblies. The WAGO 2001-1211/1000-410 combines a correctly oriented 1N4007 diode, compact construction and Push-in CAGE CLAMP® technology to support organised, maintainable industrial control wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.