Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity 1SNK900201R0000 TC5-R1 is a dark grey single-pole plug-in test connector end module for 5.2 mm spacing ENTRELEC SNK terminal assemblies, rated at 1000 V and 16 A IEC and supplied in a pack of 10.
£3.87
The TE Connectivity TC5-R1, part number 1SNK900201R0000, is a single-pole test connector from the ENTRELEC SNK Series designed to provide convenient electrical test access within compatible terminal block assemblies. Its plug-in design allows test connections to be incorporated into industrial control, automation and distribution systems without unnecessarily disturbing permanent field wiring.
Designed as an end module for 5.2 mm spacing terminal blocks, the TC5-R1 features a dark grey polyamide housing and screw-clamp conductor connection. It supports flexible and rigid stranded conductors up to 1.5 mm², providing a practical interface for measurement, commissioning, diagnostics and maintenance work.
The TC5-R1 is rated at 1000 V and 16 A to IEC, with UL and CSA current ratings of 12 A and a maximum UL/CSA main-circuit operating voltage of 600 V. A short-time withstand rating of 180 A for 1 s, 8 kV impulse withstand voltage and wide -55 to 110 °C operating temperature range support dependable use in demanding industrial environments.
Test connectors provide technicians with a dedicated interface for measurement and diagnostic equipment, helping simplify commissioning and maintenance of industrial electrical systems. The TC5-R1 is specifically designed as an end module for 5.2 mm spacing SNK terminal arrangements and provides a compact plug-in test connection without requiring permanent circuit wiring to be dismantled.
Its robust electrical ratings, screw-clamp conductor termination and wide operating temperature range make the TC5-R1 suitable for professional panel-building environments. The accessory can support routine voltage and current testing, troubleshooting and commissioning procedures when used as part of a correctly configured ENTRELEC SNK terminal assembly.
Tick the specs you need, then view products that match.
| Terminal Type | Disconnect / Test | |
|---|---|---|
| Connection | Screw clamp | |
| Product Series | TE SNK | |
| Colour | Grey | |
| Manufacturer | TE Connectivity | |
| Brand | ENTRELEC | |
| Series | ENTRELEC SNK | |
| Model | TC5-R1 | |
| Part number | 1SNK900201R0000 | |
| Product type | Test connector | |
| Conducting accessory type | Test connector | |
| Configuration | End module | |
| Number of poles | 1 | |
| Retention type | Plug-in | |
| Colour | Dark grey | |
| Gauge type | A1-B1 | |
| Product spacing | 5.2 mm | |
| IEC rated voltage | 1000 V | |
| IEC rated current | 16 A | |
| CSA rated voltage | 600 V | |
| CSA rated current | 12 A | |
| UL rated current | 12 A | |
| UL / CSA maximum operating voltage | 600 V | |
| Maximum contact current | 16 A | |
| Maximum dielectric withstand voltage | 2200 V | |
| IEC impulse withstand voltage | 8000 V | |
| Short-time withstand current at 1 s | 180 A | |
| Flexible conductor capacity | 0.22–1.5 mm² | |
| Rigid stranded conductor capacity | 0.2–1.5 mm² | |
| Insulated ferrule capacity | 0.22–1.5 mm² | |
| Two flexible conductors per screw clamp | 0.22–0.75 mm² | |
| Two rigid stranded conductors per screw clamp | 0.2–0.75 mm² | |
| Twin ferrule capacity | 0.22–0.75 mm² | |
| Wire stripping length | 8 mm | |
| Tool size | 2.5 mm | |
| Tightening torque | 0.5 Nm | |
| Product width | 5.2 mm | |
| Product height | 34.1 mm | |
| Product depth | 71.65 mm | |
| Product weight | 5.2 g | |
| Primary material | Polyamide | |
| Protection rating | IP20 | |
| Operating temperature | -55 to 110 °C | |
| Installation temperature | -5 to 40 °C | |
| Pack quantity | 10 |
The TC5-R1 is a single-pole test connector designed to provide convenient electrical test access in compatible ENTRELEC SNK terminal block assemblies.
The TC5-R1 is designed as an end-module test connector for terminal block arrangements with 5.2 mm spacing.
The TC5-R1 is rated at 1000 V and 16 A to IEC, with an IEC impulse withstand voltage of 8 kV and a short-time withstand current of 180 A for 1 s.
The test connector accepts flexible conductors from 0.22–1.5 mm² and rigid stranded conductors from 0.2–1.5 mm².
The TE Connectivity 1SNK900201R0000 TC5-R1 has a standard pack quantity of 10 pieces.
TE Connectivity ENTRELEC SNK test accessories provide convenient, dependable circuit access for commissioning, measurement and maintenance within professional industrial terminal block installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.