Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity ZS10-ST-T4 1SNK508311R0000 is a grey 10 mm² ENTRELEC SNK screw clamp test disconnect terminal block with an 8 mm pitch, sliding-link isolation, 50 A IEC current rating and 630 V IEC voltage rating for industrial measurement and control circuits.
£4.40
The TE Connectivity ZS10-ST-T4 1SNK508311R0000 is a grey 10 mm² screw clamp test disconnect terminal block designed for reliable isolation, testing and measurement of power and signal circuits in industrial control, protection and instrumentation systems. Part of the TE Connectivity ENTRELEC SNK Series, it combines secure screw clamp conductor termination with a robust sliding-link disconnect mechanism.
The ZS10-ST-T4 provides a two-position, single-level configuration on a compact 8 mm pitch. Its sliding link is operated with a screwdriver, providing a controlled method of opening the circuit during commissioning, testing or maintenance without disconnecting the field wiring.
With a rated cross-section of 10 mm², an IEC current rating of 50 A and an IEC voltage rating of 630 V, the ZS10-ST-T4 is engineered for demanding industrial applications. It also provides a 1,200 A short-time withstand current for 1 s and accepts conductors from 0.5–10 mm², making it particularly suitable for measurement, current transformer and potential transformer circuits.
Test disconnect terminal blocks provide engineers with a controlled method of isolating measurement and control circuits while leaving the field conductors securely terminated. The TE Connectivity ZS10-ST-T4 uses a screwdriver-operated sliding link to provide dependable circuit interruption during commissioning, troubleshooting, testing and maintenance.
The ZS10-ST-T4 is especially useful in current transformer and potential transformer secondary circuits. Compatible lateral jumper bars and short-circuit bridges allow engineers to configure measurement circuits efficiently, while the 8 mm terminal spacing helps maintain a compact and organised DIN rail assembly.
Tick the specs you need, then view products that match.
| Number of Levels | 1 | |
|---|---|---|
| Product Series | TE SNK | |
| Connection | Spring clamp | |
| Terminal Type | Disconnect / Test | |
| Conductor Size | 10 mm² | |
| Colour | Grey | |
| Manufacturer | TE Connectivity | |
| Series | ENTRELEC SNK | |
| Model | ZS10-ST-T4 | |
| Part number | 1SNK508311R0000 | |
| Product type | Screw clamp terminal block | |
| Block function | Disconnect / test disconnect | |
| Disconnect type | Sliding link | |
| Circuit application | Power & signal | |
| Number of circuits | 1 | |
| Number of positions | 2 | |
| Number of levels | 1 | |
| Gauge type | A5-B5 | |
| Colour | Grey | |
| Rated cross-section | 10 mm² | |
| Product spacing | 8 mm | |
| Rated current (IEC) | 50 A | |
| Rated voltage (IEC) | 630 V | |
| Rated current (UL/CSA) | 53 A | |
| Operating voltage (UL/CSA) | 300 V | |
| Impulse withstand voltage (IEC) | 8,000 V | |
| Dielectric withstand voltage | 2,000 V | |
| Short-time withstand current at 1 s | 1,200 A | |
| Power loss | 2.6 W | |
| Termination method | Screw terminal | |
| Rigid conductor capacity | 0.5–10 mm² | |
| Flexible conductor capacity | 0.5–10 mm² | |
| Flexible conductor with non-insulated ferrule | 0.5–10 mm² | |
| Flexible conductor with insulated ferrule | 0.5–6 mm² | |
| Two rigid conductors per clamp | 0.5–4 mm² | |
| Two flexible conductors per clamp | 0.5–4 mm² | |
| Twin ferrule capacity | 0.5–4 mm² | |
| Wire size | 24–6 AWG | |
| Housing material | Polyamide | |
| Flammability rating | UL 94V-0 | |
| Protection rating | IP20 | |
| Mounting type | DIN rail | |
| DIN rail compatibility | TH35-7.5 / TH35-15 | |
| Product weight | 31.9 g | |
| Operating temperature range | -55 to +110 °C |
The ZS10-ST-T4 is a test disconnect terminal block designed to provide secure conductor termination together with convenient circuit isolation and testing in industrial power, measurement and signal applications.
It uses a robust sliding-link disconnect mechanism that can be operated with a screwdriver to open the electrical circuit during testing, commissioning or maintenance.
The ZS10-ST-T4 has an IEC rated current of 50 A and rated voltage of 630 V, together with a 1,200 A short-time withstand current for 1 s.
The terminal block accepts rigid and flexible conductors from 0.5–10 mm², corresponding to conductor sizes up to 6 AWG.
It is DIN rail mounted in industrial control and measurement panels and is particularly suitable for current transformer and potential transformer secondary circuits where safe testing and circuit isolation are required.
TE Connectivity ENTRELEC SNK test disconnect terminal blocks provide dependable circuit isolation and measurement connectivity for industrial control, metering and protection applications, combining robust screw clamp termination with flexible test and disconnect functionality.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.