Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity ZS4-SF-R4 1SNK506416R0000 is an ENTRELEC SNK Series screw clamp fuse terminal block for 5 x 20 mm fuses with red LED 115–250 V AC/DC blown-fuse indication, two 2 mm test sockets and a 6.3 A 500 V IEC rating, supplied in a pack of 50.
£8.31
The TE Connectivity ZS4-SF-R4 1SNK506416R0000 is a compact 4 mm²-class screw clamp fuse terminal block designed to combine conductor termination, replaceable circuit protection and fault indication within industrial control panels. Part of the TE Connectivity ENTRELEC SNK Series, it accepts standard 5 × 20 mm cartridge fuses and provides a practical DIN rail solution for protecting individual control, signal and auxiliary circuits.
The ZS4-SF-R4 incorporates a red LED blown-fuse indicator for 115–250 V AC/DC circuits, allowing maintenance personnel to identify an operated fuse quickly. It also features two built-in 2 mm test sockets for convenient electrical testing and measurement, while two aligned jumper channels simplify potential distribution alongside compatible SNK Series terminals.
Rated at 6.3 A and 500 V IEC, the ZS4-SF-R4 provides a robust fused connection in only 6 mm of DIN rail width. Its grey and dark-grey polyamide housing, IP20 protection, UL 94V-0 flammability rating and broad -55 to +110 °C operating temperature range make it well suited to demanding industrial electrical installations.
Fuse terminal blocks provide individual circuit protection directly at the DIN rail termination point, reducing the need for separate panel-mounted fuse holders. The TE Connectivity ZS4-SF-R4 accepts a standard 5 × 20 mm fuse and combines this protection function with secure screw clamp conductor termination, making protected circuits straightforward to install, inspect and service.
Its red LED blown-fuse indicator provides immediate visual fault identification on 115–250 V AC/DC circuits, while the two integrated 2 mm test sockets give technicians convenient access for measurements and diagnostics. Together with aligned jumper channels and the compact 6 mm SNK Series format, these features make the ZS4-SF-R4 particularly effective in control and automation panels where rapid troubleshooting and efficient use of space are important.
Tick the specs you need, then view products that match.
| Number of Connection Points | 2 | |
|---|---|---|
| Connection | Spring clamp | |
| Terminal Type | Fuse | |
| Number of Levels | 1 | |
| Product Series | TE SNK | |
| Colour | Grey | |
| Manufacturer | TE Connectivity / ENTRELEC | |
| Series | SNK Series | |
| Model | ZS4-SF-R4 | |
| Part number | 1SNK506416R0000 | |
| Product type | Screw clamp fuse terminal block | |
| Block function | Fuse | |
| Connection method | Screw clamp | |
| Fuse size | 5 × 20 mm | |
| Fuse supplied | No | |
| Blown-fuse indication | Red LED | |
| Indicator operating range | 115–250 V AC/DC | |
| Indicator leakage current | <0.5 mA | |
| Test connections | 2 × 2 mm test sockets | |
| Number of levels | 1 | |
| Number of positions | 2 | |
| Number of circuits | 1 | |
| Gauge type | A3-B3 | |
| Single flexible conductor capacity | 0.22–4 mm² | |
| Single rigid stranded conductor capacity | 0.2–4 mm² | |
| Single flexible conductor range | 24–10 AWG | |
| Single insulated ferrule capacity | 0.22–4 mm² | |
| Single insulated ferrule range | 24–12 AWG | |
| Single non-insulated ferrule capacity | 0.22–4 mm² | |
| Single non-insulated ferrule range | 24–12 AWG | |
| Two flexible conductor capacity | 0.2–1.5 mm² | |
| Two rigid stranded conductor capacity | 0.2–1.5 mm² | |
| Twin ferrule capacity | 0.22–1.5 mm² | |
| IEC rated current | 6.3 A | |
| CSA rated current | 6.3 A | |
| UL rated current | 10 A | |
| IEC rated voltage | 500 V | |
| CSA rated voltage | 150 V | |
| UL / CSA maximum main-circuit operating voltage | 150 V | |
| IEC impulse withstand voltage | 6000 V | |
| Maximum dielectric withstand voltage | 1890 V | |
| Product spacing | 6 mm | |
| Wire stripping length | 10.5 mm | |
| Tool size | 3.5 mm | |
| Mounting type | DIN rail | |
| Housing material | Polyamide | |
| Colour | Grey and dark grey | |
| Protection rating | IP20 | |
| Flammability rating | UL 94V-0 | |
| Product width / spacing | 6 mm | |
| Product height | 70.5 mm | |
| Product depth | 76.8 mm | |
| Product weight | 18.6 g | |
| Operating temperature range | -55 to +110 °C | |
| Installation temperature range | -5 to +40 °C | |
| Pack quantity | 50 |
The ZS4-SF-R4 is a screw clamp fuse terminal block used to combine conductor termination with replaceable fuse protection, visual fault indication and convenient testing in industrial control and auxiliary circuits.
The ZS4-SF-R4 is designed for standard 5 × 20 mm cartridge fuses. The fuse itself is not supplied with the terminal block.
Yes. It incorporates a red LED blown-fuse indicator for 115–250 V AC/DC circuits, with leakage current below 0.5 mA, allowing an operated fuse to be identified quickly.
Yes. The terminal incorporates two 2 mm test sockets, providing convenient access for electrical measurements, commissioning and troubleshooting.
The ZS4-SF-R4 is rated at 6.3 A and 500 V IEC, with a 6000 V IEC impulse withstand voltage. TE Connectivity part number 1SNK506416R0000 is supplied in a pack quantity of 50.
TE Connectivity ENTRELEC SNK Series fuse terminal blocks provide panel builders, automation engineers and maintenance teams with compact circuit protection, secure conductor termination, accessible testing and rapid visual fault identification for industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.