Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity ZS4-S-T2-R1 1SNK506311R0000 is a grey screw-clamp DIN-rail disconnect terminal block with blade isolation, test functionality, 6 mm spacing and IEC ratings of 26 A and 400 V, supplied in a pack of 50.
£3.38
The TE Connectivity ZS4-S-T2-R1 1SNK506311R0000 is a compact grey screw-clamp disconnect terminal block designed for circuit isolation, testing and maintenance in industrial control panels, instrumentation systems and automation equipment. Part of the TE Connectivity ENTRELEC SNK series, it combines dependable screw-clamp conductor termination with an integrated blade disconnect and convenient test functionality.
The ZS4-S-T2-R1 provides one circuit, one level and two connection positions. Its disconnect arrangement allows the circuit to be opened without removing permanent field wiring, making it particularly useful during commissioning, troubleshooting and maintenance. The T2 configuration provides integrated test access for convenient electrical measurements within the terminal assembly.
Designed for conductors up to 4 mm², the terminal carries an IEC current rating of 26 A and an IEC voltage rating of 400 V. Its compact 6 mm spacing, IP20 construction and compatibility with standard TH35 DIN rails make it a practical solution for organised, serviceable industrial wiring installations.
Disconnect terminal blocks allow technicians to isolate an electrical circuit directly at the terminal strip while leaving permanent conductors securely connected. The ZS4-S-T2-R1 combines this capability with accessible test functionality, making electrical measurements and fault-finding more convenient during commissioning and maintenance.
The integrated blade disconnect provides a clear means of opening the circuit, while the screw clamps provide secure and serviceable conductor termination. With only 6 mm of terminal spacing, the ZS4-S-T2-R1 enables compact test and disconnect assemblies in industrial control and instrumentation cabinets.
Tick the specs you need, then view products that match.
| Number of Levels | 1 | |
|---|---|---|
| Connection | Spring clamp | |
| Terminal Type | Disconnect / Test | |
| Product Series | TE SNK | |
| Colour | Grey | |
| Manufacturer | TE Connectivity | |
| Brand / family | ENTRELEC | |
| Series | SNK | |
| Model | ZS4-S-T2-R1 | |
| Part number | 1SNK506311R0000 | |
| Product type | Screw-clamp terminal block | |
| Block function | Disconnect | |
| Disconnect type | Blade | |
| Connection type | Screw clamp | |
| Number of circuits | 1 | |
| Number of levels | 1 | |
| Number of positions | 2 | |
| Gauge type | A3-B3 | |
| Colour | Grey | |
| IEC rated current | 26 A | |
| IEC rated voltage | 400 V | |
| UL rated current | 26 A | |
| CSA rated voltage | 150 V | |
| UL / CSA maximum operating voltage | 150 V | |
| Impulse withstand voltage | 6000 V | |
| Dielectric withstand voltage | 1890 V | |
| Short-time withstand current at 1 s | 480 A | |
| Power loss | 0.8 W | |
| Flexible conductor capacity | 0.22–4 mm² | |
| Rigid stranded conductor capacity | 0.2–4 mm² | |
| Insulated ferrule capacity | 0.22–4 mm² | |
| Non-insulated ferrule capacity | 0.22–4 mm² | |
| Two flexible conductors per screw clamp | 0.2–1.5 mm² | |
| Two rigid stranded conductors per screw clamp | 0.2–1.5 mm² | |
| Twin ferrule capacity | 0.22–1.5 mm² | |
| Wire stripping length | 10.5 mm | |
| Tool size | 3.5 mm | |
| Product spacing | 6 mm | |
| Product height | 70.5 mm | |
| Product length | 51.35 mm | |
| Product depth | 51.4 mm | |
| Product weight | 14.2 g | |
| Housing material | Polyamide | |
| DIN rail mounting | TH35-7.5 / TH35-15 | |
| Protection rating | IP20 | |
| Flammability rating | UL 94V-0 | |
| Operating temperature | -55 to +110 °C | |
| Installation temperature | -5 to +40 °C | |
| Pack quantity | 50 |
It is a screw-clamp disconnect DIN-rail terminal block designed for connecting, isolating and testing circuits in industrial control, instrumentation and automation systems.
The ZS4-S-T2-R1 uses an integrated blade disconnect, allowing the electrical circuit to be opened for testing or maintenance without removing the connected conductors.
The terminal has an IEC rated current of 26 A and an IEC rated voltage of 400 V.
The terminal accepts flexible conductors from 0.22–4 mm² and rigid stranded conductors from 0.2–4 mm².
The TE Connectivity ZS4-S-T2-R1 1SNK506311R0000 is supplied in a pack quantity of 50 terminal blocks.
TE Connectivity ENTRELEC SNK disconnect terminal blocks provide dependable conductor termination, circuit isolation and convenient testing for compact, organised and serviceable industrial control and instrumentation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.