Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity ZS6-4S-YL 1SNK506068R0000 is a yellow four-position screw-clamp feed-through DIN-rail terminal block accepting conductors up to 6 mm² and rated at 32 A and 800 V IEC for high-density potential distribution.
£1.47
The TE Connectivity ZS6-4S-YL 1SNK506068R0000 is a compact yellow four-position screw-clamp feed-through terminal block designed for high-density power and signal distribution in industrial control panels, switchgear and automation equipment. Part of the TE Connectivity ENTRELEC SNK series, it provides four independent screw-clamp connection points on a single electrical circuit while occupying only 6 mm of DIN-rail width.
The ZS6-4S-YL is particularly useful where one electrical potential must be distributed to several conductors. Its four connection positions allow multiple conductors to share the same potential without requiring separate terminal blocks, helping reduce panel space and simplify wiring. Each connection uses proven screw-clamp technology for secure, accessible and serviceable conductor termination.
Designed for conductors up to 6 mm², the ZS6-4S-YL has an IEC rated current of 32 A and an IEC rated voltage of 800 V. Its yellow polyamide housing supports clear circuit identification, while compatibility with standard TH35 DIN rails makes it suitable for professional panel building, machinery and demanding industrial electrical installations.
The ZS6-4S-YL is designed for applications where a single electrical potential needs to be distributed between several conductors. Its four independent screw clamps are electrically connected within one feed-through circuit, allowing four conductor connections to be accommodated in only 6 mm of DIN-rail width.
This high-density arrangement can reduce the number of terminals and external bridges required in distribution circuits. The screw-clamp design provides secure conductor retention and straightforward servicing, while the yellow housing makes the terminal easy to distinguish within complex electrical and automation assemblies.
Tick the specs you need, then view products that match.
| Number of Levels | 1 | |
|---|---|---|
| Product Series | TE SNK | |
| Connection | Spring clamp | |
| Terminal Type | Feed-through | |
| Colour | Yellow | |
| Manufacturer | TE Connectivity | |
| Brand / family | ENTRELEC | |
| Series | SNK | |
| Model | ZS6-4S-YL | |
| Part number | 1SNK506068R0000 | |
| Product type | Screw-clamp terminal block | |
| Block function | Feed-through | |
| Connection type | Screw clamp | |
| Number of circuits | 1 | |
| Number of levels | 1 | |
| Number of positions | 4 | |
| Gauge type | A4-B3 | |
| Colour | Yellow | |
| IEC rated current | 32 A | |
| IEC rated voltage | 800 V | |
| UL rated current | 30 A | |
| CSA rated current | 30 A | |
| UL / CSA operating voltage | 600 V | |
| Impulse withstand voltage | 8000 V | |
| Dielectric withstand voltage | 2000 V | |
| Short-time withstand current at 1 s | 480 A | |
| Power loss | 1 W | |
| Flexible conductor capacity | 0.22–6 mm² | |
| Rigid stranded conductor capacity | 0.2–6 mm² | |
| Insulated ferrule capacity | 0.22–4 mm² | |
| Non-insulated ferrule capacity | 0.22–4 mm² | |
| Two flexible conductors per screw clamp | 0.2–2.5 mm² | |
| Two rigid stranded conductors per screw clamp | 0.2–2.5 mm² | |
| Twin ferrule capacity | 0.22–2.5 mm² | |
| Wire stripping length | 10.5 mm | |
| Tool size | 4 mm | |
| Product spacing | 6 mm | |
| Product height | 72.7 mm | |
| Product length | 48.2 mm | |
| Product depth | 48.2 mm | |
| Product weight | 15 g | |
| Housing material | Polyamide | |
| DIN rail mounting | TH35-7.5 / TH35-15 | |
| Protection rating | IP20 | |
| Flammability rating | UL 94V-0 | |
| Operating temperature | -55 to +110 °C | |
| Installation temperature | -5 to +40 °C | |
| Pack quantity | 50 |
It is a four-position feed-through DIN-rail terminal block designed to connect and distribute one electrical potential between multiple conductors in industrial power, control and signal circuits.
The ZS6-4S-YL provides four screw-clamp connection positions on a single electrical circuit and one terminal level.
The terminal accepts flexible conductors from 0.22–6 mm² and rigid stranded conductors from 0.2–6 mm².
The terminal has an IEC rated current of 32 A and an IEC rated voltage of 800 V.
The ZS6-4S-YL is designed for installation on standard TH35-7.5 and TH35-15 DIN rails.
TE Connectivity ENTRELEC SNK terminal blocks provide compact and dependable conductor termination for industrial electrical systems, with the ZS6-4S-YL delivering four-position potential distribution through independent screw clamps in a space-saving 6 mm DIN-rail footprint.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.