1SNA199244R0400 – D4/6.D2.N.ADO Terminal Block [pk=50]

Why Choose the TE Connectivity 1SNA199244R0400 D4/6.D2.N.ADO Terminal Block?

The TE Connectivity 1SNA199244R0400, also known as the D4/6.D2.N.ADO, is a compact blue double-deck feed-through DIN rail terminal block from the Entrelec SNA ADO range. Designed for high-density industrial control and automation wiring, it provides two independent feed-through circuits within a single 6 mm wide terminal footprint, helping reduce the amount of DIN rail space required inside electrical panels.

The D4/6.D2.N.ADO combines the ADO insulation displacement connection system with standard screw-clamp termination, providing installers with the benefits of fast ADO wiring alongside a conventional screw connection. The ADO connection can accommodate up to two wires per connection, making the terminal particularly useful for compact and flexible control-panel wiring.

With an IEC rated current of 17.5 A, an IEC rated voltage of 800 V and a rated conductor cross-section of 1.5 mm², the 1SNA199244R0400 is suitable for control, signal and distribution circuits in industrial equipment. Its two-level construction, IP20 main-terminal protection and compatibility with standard TH35 DIN rails make it a practical solution for densely populated electrical cabinets.

Key Advantages

• Space-saving double-deck terminal block with two independent feed-through circuits.
• Combines ADO insulation displacement and screw-clamp connection technologies.
• 17.5 A IEC rated current for industrial control and automation circuits.
• 800 V IEC rated voltage for demanding electrical installations.
• ADO connection supports up to two wires per connection.
• Compact 6 mm width increases connection density on the DIN rail.
• Wide operating temperature range supports use in demanding industrial environments.

Key Features

• TE Connectivity / Entrelec SNA ADO series.
• D4/6.D2.N.ADO blue double-deck feed-through terminal block.
• Two independent feed-through circuits.
• Two-level space-saving terminal design.
• 1.5 mm² rated cross-section.
• 17.5 A rated current.
• 800 V IEC rated voltage.
• 6 kV rated impulse withstand voltage.
• ADO insulation displacement and screw-clamp connection.
• IP20 protection at the main terminals.
• 6 mm terminal width for high-density installations.
• Compatible with TH35-7.5 and TH35-15 DIN rails.
• Blue insulating body for clear circuit identification.

Space-Saving Connections for Industrial Control Panels

Double-deck terminal blocks provide two wiring levels within approximately the same DIN rail footprint as a conventional single-level terminal, allowing panel builders to increase connection density without unnecessarily increasing cabinet size. The two feed-through circuits of the D4/6.D2.N.ADO are independent, making the terminal suitable for organising separate control or signal circuits in high-density installations.

The combination of ADO insulation displacement technology and screw-clamp termination provides additional wiring flexibility. ADO technology enables rapid conductor termination and can accommodate up to two wires per connection, while the standard screw-clamp interface provides a familiar connection method for panel builders, machine manufacturers and maintenance engineers.

Typical Applications

• High-density industrial electrical control panels.
• PLC and automation system wiring.
• Machine building and OEM equipment.
• Process control and instrumentation cabinets.
• Factory automation systems.
• Control and signal circuit distribution.
• DIN rail installations requiring two independent circuits in a compact footprint.