Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1sna179635r0700 – cbd2
TE Connectivity CBD2 shield connector with a treated brass connection bar for providing shield continuity on compatible ENTRELEC terminal blocks, supplied in a 50-piece pack.
Why Choose the TE Connectivity CBD2 Shield Connector?
The TE Connectivity CBD2 is a shield connector designed to provide reliable electrical continuity between cable shields and compatible ENTRELEC terminal block assemblies. Part of the established ENTRELEC SNA terminal block accessory range, the CBD2 provides a practical method of connecting and maintaining cable shielding within industrial control panels and automation systems.
The CBD2 is supplied as a treated brass connection bar that is installed in the lower part of the compatible terminal block. It provides continuity for the shield connection and can be connected to the cable shield by soldering or using 2.8 × 0.5 mm or 2.8 × 0.8 mm quick-connect tabs.
The 1SNA179635R0700 incorporates a notch that allows multiple shield connections to be bridged together. The connector extends approximately 13.5 mm on each side of the terminal block, providing a practical shielding connection for industrial electrical and automation installations.
Key Advantages
- Purpose-designed shield connector for ENTRELEC terminal blocks.
- Treated brass construction provides a reliable shield continuity connection.
- Can be connected by soldering or quick-connect tabs.
- Compatible with 2.8 × 0.5 mm and 2.8 × 0.8 mm quick-connect tabs.
- Notched design allows multiple shield connections to be bridged.
- Extends approximately 13.5 mm on each side of the terminal block.
- Supplied in a 50-piece pack for panel building and maintenance.
Key Features
- TE Connectivity ENTRELEC SNA accessory range.
- CBD2 shield connector.
- 1SNA179635R0700 manufacturer part number.
- Treated brass shield connection bar.
- Installed in the lower part of the compatible terminal block.
- Supports soldered shield connections.
- Supports 2.8 × 0.5 mm and 2.8 × 0.8 mm quick-connect tabs.
- Notched for bridging multiple shield connections.
Reliable Shield Continuity for Industrial Wiring
Shield connectors provide a controlled connection between cable screens and the grounding or shielding system of an electrical installation. The CBD2 is installed into the lower section of a compatible ENTRELEC terminal block and provides continuity for the cable shield connection.
The treated brass bar can be connected using soldering or suitable quick-connect tabs, while the notched construction allows shield connections to be bridged where required. This makes the CBD2 a practical accessory for industrial control panels, instrumentation and automation installations where cable shielding and organised terminal connections are important.
Typical Applications
- Industrial electrical control panels.
- Shielded cable termination systems.
- PLC and automation control cabinets.
- Instrumentation and process control systems.
- EMC-conscious industrial wiring installations.
- Electrical panel building and maintenance.
Technical Specifications
Tick the specs you need, then view products that match.
| Terminal Type | Pluggable connector | |
|---|---|---|
| Product Series | TE SNA | |
| Manufacturer | TE Connectivity | |
| Product range | ENTRELEC | |
| Series | SNA Terminal Block Accessories | |
| Model | CBD2 | |
| Product type | Shield connector | |
| Function | Shield continuity connection | |
| Material | Treated brass | |
| Connection method | Soldering or quick-connect tab | |
| Compatible quick-connect tabs | 2.8 × 0.5 mm and 2.8 × 0.8 mm | |
| Installation position | Lower part of compatible terminal block | |
| Shield bridging | Notched for bridging multiple shield connections | |
| Side extension | Approx. 13.5 mm each side of the terminal block | |
| Pack quantity | 50 | |
| EAN | 3472591796353 | |
| MPN | 1SNA179635R0700 |
Frequently Asked Questions
What is the TE Connectivity CBD2 used for?
The CBD2 is a shield connector used to provide electrical continuity between cable shields and compatible ENTRELEC terminal block assemblies.
What is the CBD2 made from?
The CBD2 is manufactured as a treated brass connection bar designed for installation in the lower part of a compatible terminal block.
How can the cable shield be connected to the CBD2?
The shield connection can be made by soldering or using compatible 2.8 × 0.5 mm or 2.8 × 0.8 mm quick-connect tabs.
Can multiple shield connections be bridged?
Yes. The CBD2 incorporates a notch for bridging shield connections, allowing multiple shielding connections to be interconnected where required.
How many CBD2 shield connectors are supplied?
The 1SNA179635R0700 is supplied in a 50-piece pack.
Trusted by Control Panel Builders Worldwide
TE Connectivity ENTRELEC shielding accessories are widely used by panel builders and automation engineers to provide reliable shield continuity and organised connections within industrial electrical assemblies.
