Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1sna167319r0600 – al2 test socket h8,5mm
TE Connectivity AL2-H8.5-M2.6 1SNA167319R0600 is a 2 mm screw-in test socket with an M2.6 mounting thread designed to provide convenient electrical test access on compatible Entrelec SNA terminal blocks.
Why Choose the TE Connectivity AL2-H8.5-M2.6 1SNA167319R0600 Test Socket?
The TE Connectivity AL2-H8.5-M2.6 1SNA167319R0600 is a compact 2 mm test socket designed for compatible Entrelec SNA screw-clamp terminal blocks. It provides a dedicated electrical test point that allows engineers and maintenance personnel to connect compatible test equipment directly to a terminal block without disturbing the permanent field wiring.
The AL2 test socket is installed by screwing into the tapped hole in the connector bar of a compatible terminal block. Its M2.6 mounting thread and approximately 8.5 mm height identify this specific AL2 configuration, helping ensure correct selection when replacing or adding test accessories to existing Entrelec SNA terminal assemblies.
Designed for use with 2 mm diameter test plugs such as the Entrelec FC2, the 1SNA167319R0600 provides a practical interface for voltage measurement, diagnostics, commissioning and maintenance. Its compact construction and approximately 1 g net weight make it an unobtrusive accessory for industrial control panels, switchgear and automation systems.
Key Advantages
- Provides a convenient 2 mm electrical test point on compatible terminal blocks.
- Allows testing and diagnostics without unnecessarily disconnecting permanent wiring.
- Screw-in installation provides secure attachment to the terminal block connector bar.
- M2.6 mounting thread for compatible Entrelec SNA terminal blocks.
- Compatible with 2 mm diameter test plugs, including the Entrelec FC2.
- Compact design is ideal for densely populated industrial control panels.
Key Features
- TE Connectivity / Entrelec SNA test accessory.
- AL2-H8.5-M2.6 test socket.
- 2 mm test socket diameter.
- 8.5 mm height designation.
- M2.6 screw mounting.
- 2 mm spacing.
- Recommended tightening torque of 0.6 N·m.
- Recommended screwdriver size of 3.5 mm.
- Compatible with selected Entrelec D4/6 and DR terminal blocks.
- Designed for use with compatible 2 mm test plugs.
Convenient Test Access for Industrial Terminal Blocks
Dedicated test sockets provide engineers with an accessible point for measurement and diagnostics without requiring permanent conductors to be removed from a terminal block. This helps simplify commissioning, fault finding and routine maintenance while preserving the integrity and organisation of the installed panel wiring.
The AL2-H8.5-M2.6 is designed specifically for compatible Entrelec SNA terminal blocks and screws directly into the tapped connector-bar hole. When paired with a compatible 2 mm test plug, it creates a compact and reusable test interface suitable for multimeter leads and other appropriately configured electrical test equipment.
Typical Applications
- Industrial electrical control panels.
- Compatible Entrelec SNA terminal block assemblies.
- Voltage measurement and circuit diagnostics.
- Switchgear commissioning and maintenance.
- Industrial automation and machine control systems.
- Electrical distribution and instrumentation panels.
Technical Specifications
Tick the specs you need, then view products that match.
| Terminal Type | Disconnect / Test | |
|---|---|---|
| Product Series | TE SNA | |
| Manufacturer | TE Connectivity / Entrelec | |
| Series | SNA | |
| Model | AL2-H8.5-M2.6 | |
| Manufacturer part number | 1SNA167319R0600 | |
| Alternative product reference | AL2 Test Socket H8,5mm | |
| Product type | Test socket / terminal block test accessory | |
| Test socket diameter | 2 mm | |
| Height designation | 8.5 mm | |
| Mounting thread | M2.6 | |
| Spacing | 2 mm | |
| Mounting method | Screwed into the tapped connector-bar hole | |
| Tightening torque | 0.6 N·m | |
| Recommended screwdriver | 3.5 mm | |
| Compatible test plug | FC2 2 mm test plug | |
| Suitable terminal blocks | D4/6.A.LL, D4/6.A.NLP, D4/6.A.NTLP, D4/6.L, D4/6.LL, D4/6.LLP, D4/6.LNTP, D4/6.NL, D4/6.NLP, D4/6.NTLP, D4/6.T, D4/6.T3.P, DR1.5/5, DR4/6, DR4/6.1 and DR4/6.G | |
| Net weight | approx. 1 g | |
| Pack quantity | 50 | |
| Customs tariff number | 85369010 | |
| EAN | 3472591673197 |
Frequently Asked Questions
What is the TE Connectivity AL2-H8.5-M2.6 1SNA167319R0600 used for?
The AL2-H8.5-M2.6 is a terminal block test socket that provides a dedicated connection point for electrical testing, measurement and diagnostics on compatible Entrelec SNA terminal blocks.
What size test plug fits the AL2 1SNA167319R0600?
The AL2 is designed for a 2 mm diameter test plug. The Entrelec FC2 is a compatible 2 mm test plug within the SNA accessory system.
How is the AL2-H8.5-M2.6 installed?
The test socket is screwed into the tapped hole in the connector bar of a compatible terminal block and uses an M2.6 mounting thread.
What is the recommended tightening torque for the 1SNA167319R0600?
The manufacturer's specified tightening torque for the AL2-H8.5-M2.6 is 0.6 N·m, with a 3.5 mm screwdriver recommended for installation.
Which terminal blocks can use the AL2 test socket?
The AL2-H8.5-M2.6 is suitable for a range of compatible Entrelec SNA terminal blocks, including selected D4/6 and DR series terminals such as D4/6.L, D4/6.LL, D4/6.T, DR1.5/5 and DR4/6 variants.
Trusted for Industrial Electrical Testing
TE Connectivity Entrelec SNA test accessories provide convenient access to industrial terminal block circuits, helping panel builders and maintenance engineers perform measurement, commissioning and fault-finding tasks while keeping permanent panel wiring securely connected.
