Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity M4/8.D2.SFJ 1SNA115692R1100 is an 8 mm double-deck screw clamp fuse terminal block rated at 6.3 A and 500 V with a fused upper circuit, feed-through lower circuit and support for 5 × 20 mm and 5 × 25 mm fuses.
£7.55
The TE Connectivity M4/8.D2.SFJ 1SNA115692R1100 is a compact and reliable double-deck screw clamp fuse terminal block designed for circuit protection and feed-through wiring in industrial control panels, automation systems and electrical cabinets. Part of the established ENTRELEC SNA terminal block range, it combines two independent circuits within a single 8 mm-wide terminal, helping reduce valuable DIN rail space in high-density installations.
The M4/8.D2.SFJ provides a fused upper level and feed-through lower level, allowing protection and standard circuit termination to be combined within one double-deck assembly. The flip-top fuse holder accepts standard 5 × 20 mm and 5 × 25 mm fuse links, while the internal jumper option provides additional flexibility when configuring terminal groups and distribution circuits.
With a rated current of 6.3 A, rated voltage of 500 V and rated conductor cross-section of 4 mm², the M4/8.D2.SFJ provides dependable performance for industrial signal and control applications. Its screw-clamp connections accept flexible conductors up to 4 mm² and rigid conductors up to 6 mm², while compatibility with G32, TH35-7.5 and TH35-15 DIN rails enables straightforward installation in a wide variety of electrical panels.
Double-deck fuse terminal blocks such as the TE Connectivity M4/8.D2.SFJ allow two independent electrical circuits to occupy the DIN rail footprint normally required by a single-level terminal. The upper level provides replaceable fuse protection while the lower level provides a conventional feed-through connection, making the design particularly useful where control cabinet space is limited.
The flip-top fuse holder provides convenient access to 5 × 20 mm or 5 × 25 mm fuse links during commissioning and maintenance, while the internal jumper option supports flexible circuit distribution. Combined with secure screw-clamp termination and universal DIN rail compatibility, the M4/8.D2.SFJ provides an efficient solution for machine builders, panel builders and industrial automation engineers.
Tick the specs you need, then view products that match.
| Number of Levels | 2 | |
|---|---|---|
| Connection | Screw clamp | |
| Terminal Type | Fuse | |
| Conductor Size | 4 mm² | |
| Product Series | TE SNA | |
| Colour | Grey | |
| Manufacturer | TE Connectivity / ENTRELEC | |
| Series | ENTRELEC SNA | |
| Model | M4/8.D2.SFJ | |
| Part number | 1SNA115692R1100 | |
| Product type | Double-deck screw clamp fuse terminal block | |
| Function | Fuse / feed-through | |
| Configuration | Fused upper deck with feed-through lower deck | |
| Number of levels | 2 | |
| Number of positions | 4 | |
| Fuse sizes | 5 × 20 mm / 5 × 25 mm | |
| Fuse holder type | Flip-top | |
| Rated current | 6.3 A | |
| Rated voltage | 500 V | |
| Rated impulse withstand voltage | 6000 V | |
| Rated cross-section | 4 mm² | |
| Flexible conductor capacity | 0.5–4 mm² | |
| Rigid conductor capacity | 0.5–6 mm² | |
| Wire range | 24–12 AWG | |
| Connection type | Screw clamp | |
| Gauge type | A4 | |
| Wire stripping length | 9.5 mm | |
| Product width / spacing | 8 mm | |
| Dimensions (H × W × D) | 85.7 × 8 × 59 mm | |
| Weight | approx. 30 g | |
| Insulation material | Polyamide | |
| Colour | Grey | |
| Protection rating | IP20 | |
| Pollution degree | 3 | |
| Ambient temperature | -5 to +40 °C | |
| Mounting type | DIN rail | |
| DIN rail compatibility | G32 / TH35-7.5 / TH35-15 | |
| EAN | 3472591156928 |
The M4/8.D2.SFJ is a double-deck fuse terminal block used to combine a protected fused circuit and a separate feed-through circuit within one compact DIN rail terminal position.
The flip-top fuse holder is designed to accept standard 5 × 20 mm and 5 × 25 mm fuse links.
The terminal block has a rated main-circuit current of 6.3 A, a rated voltage of 500 V and a rated impulse withstand voltage of 6000 V.
The screw-clamp connections accept flexible conductors from 0.5–4 mm² and rigid conductors from 0.5–6 mm², with a rated cross-section of 4 mm².
The M4/8.D2.SFJ is suitable for mounting on G32, TH35-7.5 and TH35-15 DIN rail profiles, allowing flexible integration into industrial electrical panels.
TE Connectivity ENTRELEC SNA fuse terminal blocks provide dependable circuit protection, efficient conductor termination and space-saving DIN rail integration for industrial automation, machine building and professional control panel applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.