Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1sna115544r1400 – element a connecteur modulaire
TE Connectivity 1SNA115544R1400 CEV 6.1 is a single-pole test plug for 6 mm terminal blocks, supplied with a 2 m cable and rated at 250 V AC/DC and 2 A for industrial circuit testing.
Why Choose the TE Connectivity CEV 6.1 1SNA115544R1400 Test Plug?
The TE Connectivity CEV 6.1 1SNA115544R1400 is a single-pole test plug for 6 mm terminal blocks, designed to provide quick and convenient electrical test access within industrial control panels and terminal assemblies. Part of the established ENTRELEC SNA connection system, this accessory enables technicians to perform circuit measurements without modifying the existing terminal block arrangement.
The CEV 6.1 is supplied as a ready-to-use test plug with a 2 m cable. Electrical contact is made directly through the terminal screw head, allowing test equipment to be connected quickly during commissioning, maintenance and fault diagnosis. The attached cable has a conductor cross-section of 0.34 mm² / 22 AWG, providing a practical connection for measurement applications.
Designed specifically for 6 mm-pitch terminal arrangements, the 1SNA115544R1400 provides a compact and reusable testing interface for industrial electrical systems. With a rated test current of 2 A and rated voltage of 250 V AC/DC, it is well suited to control, signal and instrumentation circuits where convenient test access is required.
Key Advantages
- Ready-to-use single-pole test plug for convenient electrical measurements.
- Designed specifically for 6 mm terminal block spacing.
- Supplied with an integrated 2 m test cable.
- Contact is made at the terminal screw head, avoiding changes to the existing terminal arrangement.
- 2 A rated current for control, signal and measurement circuits.
- Ideal for commissioning, maintenance, troubleshooting and routine electrical testing.
Key Features
- TE Connectivity / ENTRELEC CEV 6.1 test accessory.
- Single-pole configuration for individual circuit testing.
- Suitable for 6 mm-pitch terminal blocks.
- 2 m pre-wired cable for convenient connection to test equipment.
- 0.34 mm² / 22 AWG cable conductor.
- 250 V AC/DC rated voltage.
- 2 A rated current.
- Designed for rapid testing without rearranging existing terminal blocks.
Reliable Electrical Testing for Terminal Block Circuits
Test plugs provide technicians with a convenient method of accessing electrical circuits during commissioning, servicing and troubleshooting. The CEV 6.1 is designed to make contact directly with the screw head of a compatible terminal block, allowing measurements to be performed without removing conductors or altering the established terminal arrangement.
Its pre-wired 2 m cable makes the accessory ready for use and provides sufficient reach for connection to suitable measuring equipment. The single-pole design is particularly useful when individual control, signal or instrumentation circuits need to be checked while maintaining an organised and serviceable electrical panel.
Typical Applications
- Industrial control panel testing and commissioning.
- Terminal block circuit measurements.
- PLC and automation control circuits.
- Instrumentation and signal wiring.
- Electrical maintenance and fault diagnosis.
- Machine building and OEM control panels.
Technical Specifications
Tick the specs you need, then view products that match.
| Terminal Type | Disconnect / Test | |
|---|---|---|
| Product Series | TE SNA | |
| Connection | Pluggable | |
| Manufacturer | TE Connectivity / ENTRELEC | |
| Series | ENTRELEC CEV / SNA accessories | |
| Model | CEV 6.1 | |
| Part number | 1SNA115544R1400 | |
| Alternative description | Element à connecteur modulaire | |
| Product type | Test plug | |
| Configuration | Single pole | |
| Terminal spacing | 6 mm | |
| Rated voltage | 250 V AC/DC | |
| Rated current | 2 A | |
| Cable length | 2 m | |
| Cable conductor cross-section | 0.34 mm² | |
| Cable conductor size | 22 AWG | |
| Test contact method | Terminal screw head contact | |
| Product weight | 24 g | |
| Barcode / EAN | 3472591155440 |
Frequently Asked Questions
What is the TE Connectivity CEV 6.1 1SNA115544R1400 used for?
It is a single-pole test plug used to provide convenient electrical test access to compatible 6 mm terminal block circuits during commissioning, maintenance and troubleshooting.
What terminal block spacing is the CEV 6.1 designed for?
The CEV 6.1 is designed for terminal arrangements with a 6 mm pitch.
What cable is supplied with the 1SNA115544R1400?
The test plug is supplied ready for use with a 2 m cable using a 0.34 mm² / 22 AWG conductor.
What are the electrical ratings of the CEV 6.1?
The CEV 6.1 has a rated voltage of 250 V AC/DC and a rated current of 2 A.
Does the CEV 6.1 require terminal wiring to be disconnected for testing?
No. The test plug is designed to make electrical contact at the terminal screw head, allowing testing without changing the existing terminal block arrangement.
Trusted Industrial Connection Technology
TE Connectivity ENTRELEC test accessories provide practical and dependable access to industrial terminal circuits, helping panel builders, commissioning engineers and maintenance technicians perform measurements efficiently while preserving organised permanent wiring.
