Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity 1SNA115509R2200 MA2.5/5.SNBT is a 5 mm wide two-position DIN-rail disconnect terminal block with a knife-switch mechanism and screw termination for conductors up to 2.5 mm² or 14 AWG.
£2.98
The TE Connectivity 1SNA115509R2200, also identified as MA2.5/5.SNBT, is a compact DIN-rail disconnect terminal block designed for convenient isolation, testing and maintenance of industrial control and instrumentation circuits. Part of the established TE Connectivity / Entrelec SNA terminal block series, it combines screw-clamp conductor termination with an integral knife-switch disconnect mechanism.
The MA2.5/5.SNBT provides two conductor positions on a single level and allows the electrical path between them to be opened without removing the connected wiring. This makes it particularly useful in control cabinets where circuits need to be isolated for commissioning, troubleshooting, measurement or routine maintenance.
With a compact terminal width of only 5 mm and conductor capacity up to 2.5 mm² or 14 AWG, the 1SNA115509R2200 enables dense, organised DIN-rail installations. Its grey housing, screw termination and UL 94 V-0 flammability classification support dependable use in professional industrial electrical assemblies.
Disconnect terminal blocks allow technicians to open an electrical circuit at the terminal strip without disturbing the permanent field wiring. The knife-switch mechanism in the MA2.5/5.SNBT provides a clear and practical means of separating the two terminal positions during testing, commissioning or fault diagnosis.
Its narrow 5 mm profile makes the 1SNA115509R2200 particularly useful where panel space is limited, while screw-clamp termination provides a familiar and dependable wiring method for industrial automation, process control and instrumentation systems.
Tick the specs you need, then view products that match.
| Number of Levels | 1 | |
|---|---|---|
| Product Series | TE SNA | |
| Connection | IDC (ADO) | |
| Terminal Type | Disconnect / Test | |
| Colour | Grey | |
| Manufacturer | TE Connectivity / Entrelec | |
| Series | SNA | |
| Model | MA2.5/5.SNBT | |
| Manufacturer part number | 1SNA115509R2200 | |
| Product type | DIN-rail disconnect terminal block | |
| Disconnect type | Knife switch | |
| Number of positions | 2 | |
| Number of levels | 1 | |
| Termination style | Screw | |
| Wire size | up to 2.5 mm² | |
| Wire gauge | 14 AWG | |
| Terminal width | 5 mm | |
| Stripping length | 10 mm | |
| Colour | Grey | |
| Flammability rating | UL 94 V-0 | |
| Mounting type | DIN rail | |
| Barcode / EAN | 3472591155099 |
The 1SNA115509R2200 is a DIN-rail disconnect terminal block used to connect conductors while providing a convenient means of electrically isolating the circuit for testing, commissioning and maintenance.
The MA2.5/5.SNBT uses an integral knife-switch disconnect mechanism that allows the electrical connection between its two positions to be opened.
The terminal is designed for conductors up to 2.5 mm², corresponding to approximately 14 AWG.
The terminal has a compact width of 5 mm, making it suitable for high-density DIN-rail terminal assemblies.
Conductors are secured using screw terminals, with a recommended stripping length of approximately 10 mm.
TE Connectivity and Entrelec SNA terminal blocks are widely used in industrial control and automation systems where compact installation, dependable conductor termination and convenient circuit isolation are required.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.