RS64/RA Partex Spade Terminals (Forks), M6, Red, pack 100

Why Choose the Partex RS64/RA M6 Red Right-Angled Spade Terminal?

The Partex RS64/RA is a red pre-insulated right-angled spade (fork) crimp terminal designed for connecting stranded copper conductors to M6 threaded studs and screw terminals. Its right-angled configuration provides a practical solution for electrical installations where the cable needs to approach the connection point at an angle rather than in a straight line.

Designed for 0.5–1.5 mm² copper conductors (22–16 AWG), the RS64/RA combines a conductive copper terminal body with durable red PVC insulation around the crimp barrel. The fork opening is sized for an M6 stud, with a nominal 6.4 mm clearance, making it suitable for compatible bolted electrical connections in control panels, industrial machinery and electrical equipment.

The open-fork terminal design allows the connection to be installed or removed by loosening the fastening screw or nut, without necessarily removing it completely. Supplied in a convenient pack of 100 terminals, the Partex RS64/RA is a practical choice for electrical contractors, panel builders, maintenance engineers and equipment manufacturers requiring consistent right-angled cable terminations.

Key Advantages

• Right-angled fork terminal design supports alternative cable routing and connection orientations.
• M6 stud compatibility with a nominal 6.4 mm fork opening.
• Red PVC insulation provides conductor size identification and protection around the crimp connection.
• Suitable for 0.5–1.5 mm² stranded copper conductors.
• Conductive copper construction supports dependable electrical connections.
• Open-fork configuration allows convenient installation and maintenance without complete fastener removal.
• Crimp termination provides a secure conductor connection when installed with suitable tooling.
• Pack of 100 is ideal for repeat electrical assembly, installation and maintenance work.

Key Features

• Partex RS64/RA pre-insulated spade terminal.
• Right-angled fork configuration.
• M6 threaded stud compatibility.
• 6.4 mm nominal fork opening.
• 0.5–1.5 mm² conductor size range.
• Suitable for 22–16 AWG copper conductors.
• High-grade red PVC insulation.
• Copper terminal construction.
• Crimp-on termination for stranded copper wires.
• Open-ended fork connection for convenient servicing.
• 100 terminals per pack.

Reliable Right-Angled M6 Fork Connections for Electrical Wiring

Spade terminals, also known as fork terminals, are widely used to connect electrical conductors to threaded studs, screw terminals and bolted electrical connection points. The Partex RS64/RA features an M6 right-angled fork configuration, allowing the conductor to be routed in a different direction from a conventional straight spade terminal.

The open-ended fork design offers a particular advantage during installation and maintenance. Rather than removing the fastening screw or nut completely, the installer can often loosen the connection sufficiently to insert or remove the terminal. This can simplify servicing in control panels and electrical equipment where multiple connections require periodic inspection or replacement.

The red PVC insulation identifies the terminal as suitable for the 0.5–1.5 mm² conductor category. Colour coding helps installers distinguish between different insulated crimp terminal sizes and select the appropriate tooling. The copper terminal body provides the conductive connection between the crimped wire and the mating electrical contact.

For dependable performance, the conductor should be stripped to the correct length, inserted fully into the crimp barrel and compressed using a suitable crimping tool designed for red pre-insulated terminals. Correct compression is essential for achieving reliable electrical contact and mechanical conductor retention.

The right-angled design is particularly useful where the connection point and cable route require an angled termination. The installer should ensure that the fork is fully seated beneath the fastening assembly, that the connection is tightened to the equipment manufacturer's requirements and that the cable is adequately supported to avoid unnecessary mechanical strain.

Typical Applications

• Termination of 0.5–1.5 mm² copper conductors onto M6 screw and stud connections.
• Electrical control panels and switchgear assemblies.
• Industrial machinery and equipment wiring.
• Bolted terminal connections requiring right-angled cable routing.
• Electrical equipment manufacturing and OEM assembly.
• Maintenance and replacement of existing insulated fork terminals.
• Cable harness manufacturing and electrical wiring workshops.
• Commercial and industrial electrical installations.