Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HSB-5.5 Partex Heatshrink Butt Connectors, Adhesive Lined, pack 100
Partex HSB-5.5 adhesive-lined heatshrink butt connectors supplied in a pack of 100, designed for crimp joining compatible electrical conductors with heat-activated insulation and protective sealing.
£30.08
Why Choose the Partex HSB-5.5 Adhesive Lined Heatshrink Butt Connectors?
The Partex HSB-5.5 Heatshrink Butt Connectors are designed to provide a secure, insulated connection between two electrical conductors. Combining a crimp butt connector with an adhesive-lined heat shrink sleeve, these connectors offer a practical solution for joining wires while helping protect the connection against moisture, dirt and everyday environmental exposure.
Manufactured by Partex, a specialist in cable identification and electrical installation products, the HSB-5.5 connectors are suitable for professional electrical installation, wiring repairs and cable harness assembly. Their integrated heat shrink insulation contracts around the connection when heated, while the internal adhesive helps form a protective seal around appropriately sized cable insulation.
Supplied in a convenient pack of 100 connectors, the Partex HSB-5.5 is ideal for electrical contractors, maintenance engineers, panel builders and industrial wiring professionals requiring a reliable supply of insulated wire joining terminals. These adhesive-lined heatshrink butt connectors are particularly useful where both electrical continuity and additional protection of the completed connection are important.
Key Advantages
- Integrated heat shrink insulation provides a protective covering around the completed electrical connection.
- Adhesive-lined sleeve helps seal the connection against moisture and contaminants when correctly installed.
- Crimp connection design provides a secure mechanical and electrical joint when used with compatible conductors and tooling.
- Pack of 100 offers a practical quantity for professional electrical installation and maintenance work.
- Butt splice configuration allows two compatible conductors to be joined end to end.
- Helps protect the connection against abrasion and everyday mechanical wear.
- Combines wire joining, insulation and sealing in a single connector.
- Suitable for cable repairs, wiring extensions, equipment maintenance and cable harness assembly.
Key Features
- Partex HSB-5.5 heatshrink butt connectors.
- Adhesive-lined heat shrink insulation.
- Butt connector design for joining two conductors end to end.
- Crimp termination for secure electrical wire connections.
- Heat-activated adhesive helps provide a protective seal around suitable cable insulation.
- Pack quantity of 100 connectors.
- Suitable for compatible stranded electrical conductors.
- Insulated sleeve contracts around the connection when heated.
- Suitable for professional wiring repairs and cable assembly applications.
- Designed for use with an appropriate crimping tool and controlled heat source.
Secure Electrical Connections with Adhesive Lined Heat Shrink Protection
Heatshrink butt connectors are widely used in electrical wiring applications where two conductors need to be joined in a compact, insulated connection. Unlike a basic uninsulated butt splice, an adhesive-lined heat shrink connector combines a crimp termination with an external protective sleeve. This helps simplify installation by providing both the electrical joining component and its insulation within a single product.
The Partex HSB-5.5 is designed for use with compatible conductors and an appropriately sized crimping tool. During installation, the prepared wire ends are inserted into opposite sides of the connector and crimped securely. Once the electrical connection has been made, controlled heat is applied to the outer sleeve, causing it to shrink around the wire insulation.
As the heat shrink sleeve contracts, its internal adhesive lining activates and helps form a protective seal at the ends of the connector. This provides an additional barrier against moisture and contaminants, making adhesive-lined butt connectors particularly useful for wiring installations where environmental protection is desirable. The effectiveness of the seal depends on correct cable sizing, preparation, crimping and heat application.
The HSB-5.5 designation identifies this particular Partex connector variant. Before installation, confirm the manufacturer's specified conductor size range, compatible wire construction, electrical rating and crimp tooling requirements. The connector should not be selected solely by its model number. Where a particular waterproof rating, temperature rating or regulatory approval is required, verify the relevant product specification before use.
Typical Applications
- Electrical wire joining and cable extensions.
- Repair of compatible stranded wire connections.
- Industrial equipment wiring and maintenance.
- Electrical control panel and machine wiring.
- Cable harness manufacturing and assembly.
- Automotive and vehicle electrical repairs where the connector meets the application requirements.
- Commercial electrical equipment maintenance.
- Electrical wiring refurbishment and replacement.
- Connections requiring additional moisture protection.
- Joining compatible conductors in low-voltage wiring systems, subject to the connector's verified electrical ratings.
- Electrical installation and maintenance workshops.
- Professional cable assembly and repair operations.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Butt Connector | |
|---|---|---|
| Insulation Type | Heat-shrink insulated | |
| Manufacturer | Partex | |
| Model / Part number | HSB-5.5 | |
| Product type | Heatshrink butt connector | |
| Connector configuration | Inline butt splice | |
| Termination method | Crimp | |
| Insulation type | Heat shrink sleeve | |
| Adhesive lining | Yes | |
| Product designation | 5.5 | |
| Pack quantity | 100 connectors | |
| Installation method | Crimping followed by heat shrinking | |
| Primary function | Electrical wire joining, insulation and connection protection | |
| Typical applications | Electrical wiring repairs, cable extensions, equipment wiring and cable harness assembly | |
| HS Code | 85369010 |
Frequently Asked Questions
What are the Partex HSB-5.5 heatshrink butt connectors used for?
The Partex HSB-5.5 connectors are used to join two compatible electrical conductors end to end. They combine a crimp butt splice with adhesive-lined heat shrink insulation, making them suitable for wiring repairs, cable extensions, equipment maintenance and cable harness assembly.
What is the benefit of adhesive-lined heat shrink insulation?
The adhesive-lined heat shrink sleeve contracts around the connection when heated. At the same time, the internal adhesive activates and helps create a protective seal around suitable cable insulation. This helps reduce exposure to moisture and contaminants when the connector is correctly installed.
How many connectors are supplied in a pack?
The Partex HSB-5.5 is supplied in a pack of 100 heatshrink butt connectors, providing a practical quantity for electrical contractors, maintenance engineers and cable assembly professionals.
What wire size is suitable for the Partex HSB-5.5?
The HSB-5.5 is a specific connector variant within the Partex heatshrink butt connector range. The compatible conductor cross-sectional area should be confirmed against the manufacturer's technical specifications before installation. Correct wire sizing is essential for achieving a secure crimp and effective insulation seal.
How do you install Partex HSB-5.5 adhesive-lined butt connectors?
Strip the cable ends to the appropriate length, insert the compatible conductors into opposite sides of the connector and crimp using the specified tool and die. Check the crimp is secure, then apply controlled, even heat using a suitable heat gun until the outer sleeve contracts and the adhesive forms a seal around the cable insulation. Always follow the manufacturer's installation instructions and ensure the circuit is safely isolated before working on electrical wiring.
Trusted by Electrical and Industrial Professionals
Partex cable identification and electrical installation products are used by electrical contractors, control panel builders, industrial maintenance engineers and cable assembly professionals. The HSB-5.5 adhesive-lined heatshrink butt connectors provide a practical solution for joining compatible conductors while adding insulation and protective sealing to professional electrical connections.
