Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
PXP95 Partex copper flat pin connector, 95mm², pack 20
Partex PXP95 copper flat pin connector designed for crimp termination of 95 mm² electrical conductors into compatible flat pin terminal connections, supplied in a pack of 20.
£72.76
Why Choose the Partex PXP95 Copper Flat Pin Connector?
The Partex PXP95 is a copper flat pin connector designed for terminating 95 mm² electrical conductors in compatible electrical connection equipment. Supplied in a pack of 20, this connector provides a practical solution for electrical contractors, switchgear manufacturers, control panel builders and industrial maintenance engineers requiring crimped cable terminations with a flat pin connection.
As part of the Partex PXP copper flat pin connector range, the PXP95 combines a tubular conductor entry with a flat pin contact. The conductor barrel is designed for crimp termination using appropriately selected tooling, while the flat pin enables connection to suitable terminals designed to accommodate this type of contact.
The Partex PXP95 is particularly relevant to industrial power distribution, electrical switchgear, control panel manufacturing, machinery wiring and electrical equipment maintenance. Its specified 95 mm² conductor capacity makes it suitable for larger cable terminations where a compatible flat pin connection is required, while the 20-piece pack supports installation projects, repetitive assembly work and maintenance stock requirements.
Key Advantages
- Designed for terminating 95 mm² electrical conductors.
- Flat pin connection provides an alternative to ring-type cable lugs where compatible equipment terminals are used.
- Copper construction provides an electrically conductive connection interface.
- Crimp-type conductor barrel supports secure conductor retention when correctly installed.
- Suitable for electrical equipment requiring flat pin conductor terminations.
- Supports practical installation of larger conductors into compatible terminal arrangements.
- Provides a convenient cable termination method for industrial electrical assemblies.
- Suitable for use with correctly matched conductors, crimping tools and dies.
- Pack of 20 connectors supports repetitive installation and maintenance requirements.
- Part of the Partex PXP copper flat pin connector range.
Key Features
- Partex copper flat pin connector.
- Product reference: PXP95.
- 95 mm² nominal conductor size.
- Copper connector construction.
- Flat pin contact configuration.
- Tubular conductor entry for crimp termination.
- Designed for use with compatible electrical conductors.
- Suitable for correctly matched crimping equipment and dies.
- Flat pin designed for insertion into compatible electrical terminals.
- Suitable for fixed electrical connections.
- Practical for switchgear, electrical distribution and industrial equipment wiring.
- Supports cable termination where a flat pin interface is specified.
- Supplied in packs of 20.
Flat Pin Cable Terminations for Industrial Electrical Equipment
Reliable electrical cable termination requires careful consideration of conductor size, terminal compatibility, contact geometry and installation methods. Flat pin connectors provide a useful alternative to ring terminals when electrical equipment features a suitable receiving terminal. Their pin-shaped connection interface can accommodate equipment terminal arrangements where a conventional ring lug is not appropriate.
The Partex PXP95 is designed for 95 mm² conductors and provides a flat pin connection for compatible electrical terminals. Its copper conductor barrel is intended to be crimped onto a suitably prepared cable, creating the conductor-to-terminal connection before the flat pin is installed into the receiving equipment terminal.
During installation, the conductor should be stripped to the appropriate length without damaging its strands. The conductor must be inserted fully into the connector barrel and crimped using a suitable tool and die combination. The completed flat pin connection should then be installed according to the receiving terminal manufacturer's instructions, including any specified clamping or tightening requirements.
Because the PXP95 is intended for 95 mm² conductors, engineers should verify that the equipment terminal accepts the connector's actual flat pin dimensions and is suitable for the intended electrical load. Conductor size alone does not establish the current rating of the complete connection. The 20-piece pack makes the PXP95 a practical option for switchgear manufacturing, electrical panel assembly and industrial maintenance operations.
Typical Applications
- Industrial electrical power distribution equipment.
- Low-voltage switchgear and electrical distribution assemblies.
- Motor control centres with compatible terminal connections.
- Industrial machinery and equipment power wiring.
- Electrical terminals designed to accept flat pin connectors.
- Power distribution cabinets and control panels.
- OEM electrical equipment manufacturing.
- Industrial plant electrical installation and maintenance.
- Replacement of compatible flat pin cable terminations.
- Commercial and industrial electrical infrastructure.
Technical Specifications
Tick the specs you need, then view products that match.
| Material | Copper | |
|---|---|---|
| Device Type | Pin Terminal | |
| Conductor Size | 95 mm² | |
| Manufacturer | Partex | |
| Series | PXP Copper Flat Pin Connectors | |
| Model | PXP95 | |
| Product type | Copper flat pin connector | |
| Terminal configuration | Flat pin | |
| Nominal conductor cross-sectional area | 95 mm² | |
| Connector material | Copper | |
| Conductor termination method | Crimping | |
| Equipment connection type | Flat pin terminal interface | |
| Conductor entry | Tubular barrel | |
| Contact arrangement | Flat pin | |
| Quantity per pack | 20 | |
| Typical application | Electrical cable termination | |
| Installation requirement | Compatible conductor, crimp tooling and receiving terminal | |
| HS Code | 74031900 |
Frequently Asked Questions
What is the Partex PXP95 used for?
The Partex PXP95 is a copper flat pin connector designed to terminate a 95 mm² electrical conductor and connect it to compatible electrical equipment terminals. It is suitable for applications requiring a crimped conductor connection with a flat pin interface.
What cable size is compatible with the Partex PXP95?
The PXP95 is specified for a nominal conductor cross-sectional area of 95 mm². The conductor material, construction and dimensions should be checked against the connector and crimping equipment requirements before installation.
What is the difference between a flat pin connector and a ring terminal?
A flat pin connector is designed for insertion into a compatible receiving terminal, whereas a ring terminal features a circular fixing hole for attachment to a stud or bolted connection. The correct type depends on the electrical equipment's terminal arrangement and connection requirements.
How is the Partex PXP95 copper flat pin connector installed?
The conductor is stripped to the appropriate length, inserted into the connector's tubular barrel and crimped using suitable tooling and dies. The flat pin is then inserted into a compatible equipment terminal and secured according to the terminal manufacturer's installation instructions.
How many Partex PXP95 connectors are supplied in a pack?
The Partex PXP95 is supplied in a pack of 20 connectors, making it suitable for electrical panel manufacturing, industrial wiring projects and maintenance stock.
Trusted by Electrical Engineers and Industrial Installers Worldwide
Partex cable connection and identification products support electrical contractors, industrial maintenance engineers, switchgear manufacturers and control panel builders in producing organised and dependable electrical installations. The PXP95 copper flat pin connector provides a practical solution for terminating 95 mm² conductors into compatible flat pin terminal arrangements, with a 20-piece pack suited to professional electrical equipment assembly, industrial installation and maintenance requirements.
