Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
PXP4 Partex copper flat pin connector, 4mm², pack 100
Partex PXP4 is a copper flat pin crimp connector designed for terminating 4 mm² copper conductors into compatible electrical terminals, supplied in a pack of 100 for industrial and commercial wiring applications.
£8.78
Why Choose the Partex PXP4 Copper Flat Pin Connector?
The Partex PXP4 is a practical and reliable copper flat pin connector designed for terminating 4 mm² electrical conductors in industrial control panels, electrical distribution equipment and general electrical installations. Featuring a flat pin connection end and a crimp termination barrel, this connector provides a convenient method of preparing stranded copper conductors for connection to compatible electrical terminals.
Manufactured from conductive copper, the PXP4 is designed to establish a secure electrical connection when installed using suitable crimping equipment. Its flat pin configuration allows a terminated conductor to be inserted into compatible screw-clamp or other terminals specifically designed to accept flat pin connectors. This makes it particularly useful for electrical panel wiring, control equipment and applications where a defined connection end is required.
Supplied in a convenient pack of 100 connectors, the Partex PXP4 is suitable for professional electricians, control panel builders, equipment manufacturers and maintenance engineers. Its 4 mm² conductor capacity and compact flat pin design make it a practical cable termination solution for repeat installations and electrical assembly work.
Key Advantages
- Copper construction provides good electrical conductivity for dependable cable terminations.
- 4 mm² conductor capacity suits compatible copper electrical cables.
- Flat pin connection design enables termination into compatible electrical terminal clamps.
- Crimp termination provides secure conductor retention when correctly installed.
- Helps produce consistent cable ends for electrical panel assembly and equipment wiring.
- Suitable for industrial control systems, electrical distribution equipment and machinery wiring.
- Provides an alternative to inserting bare stranded conductors into compatible terminal connections.
- Compact design supports organised electrical wiring and termination work.
- Pack of 100 offers a convenient quantity for electrical installation, manufacturing and maintenance.
Key Features
- Partex PXP flat pin connector range.
- PXP4 manufacturer part number.
- 4 mm² nominal conductor cross-section.
- Copper connector construction.
- Flat pin termination end for compatible electrical terminals.
- Crimp barrel for mechanical and electrical connection to the conductor.
- Designed for use with suitable copper conductors.
- Compatible with appropriate terminal crimping tools and dies.
- Suitable for electrical control panel and switchgear wiring applications.
- Designed for professional electrical installation and assembly work.
- Suitable for repeat cable termination tasks.
- 100 connectors per pack.
Reliable Flat Pin Cable Terminations for Electrical Control Panels
Flat pin connectors are used to prepare electrical conductors for connection to compatible terminal blocks, screw clamps and electrical equipment. The Partex PXP4 combines a crimp barrel for a 4 mm² copper conductor with a flat pin connection end, helping create a defined and secure termination for suitable electrical connection points.
Correct installation requires appropriate conductor preparation, compatible crimping tooling and confirmation that the receiving terminal accepts the connector's pin geometry. The conductor should be fully inserted into the crimp barrel and crimped using the correct die before the flat pin is secured in the electrical terminal. The suitability and current-carrying capability of the completed connection depend on the conductor, connector, terminal and installation conditions.
Typical Applications
- Industrial electrical control panels and automation cabinets.
- Electrical terminal blocks designed for flat pin connections.
- Switchgear and electrical distribution equipment wiring.
- Industrial machinery and equipment manufacturing.
- Commercial electrical control installations.
- Electrical panel building and cable harness assembly.
- Maintenance and replacement of electrical cable terminations.
- General-purpose crimped connections for compatible 4 mm² copper conductors.
Technical Specifications
Tick the specs you need, then view products that match.
| Suitable Conductor Material | Copper | |
|---|---|---|
| Conductor Size | 4 mm² | |
| Material | Copper | |
| Device Type | Pin Terminal | |
| Manufacturer | Partex | |
| Product range | PXP Flat Pin Connectors | |
| Manufacturer part number | PXP4 | |
| Product type | Copper flat pin connector | |
| Terminal configuration | Flat pin | |
| Nominal conductor cross-section | 4 mm² | |
| Connector material | Copper | |
| Termination method | Crimp connection | |
| Connection end | Flat pin | |
| Conductor compatibility | Compatible copper conductors | |
| Installation method | Cable crimping followed by insertion into a compatible electrical terminal | |
| Typical applications | Control panels, terminal connections, industrial equipment and electrical wiring | |
| Pack quantity | 100 pieces | |
| HS Code | 74031900 |
Frequently Asked Questions
What is the Partex PXP4 copper flat pin connector used for?
The Partex PXP4 is designed to terminate 4 mm² copper conductors with a flat pin connection end. It is used in electrical panels, control equipment and other installations where the receiving terminal is designed to accept a flat pin connector.
What cable size is suitable for the Partex PXP4?
The PXP4 is designed for a nominal conductor cross-section of 4 mm². The cable material and construction should be compatible with the connector and the selected crimping tools.
What is the difference between a flat pin connector and a ring terminal?
A flat pin connector has a flat connection end intended for insertion into a compatible electrical terminal, whereas a ring terminal has a circular fixing hole designed for attachment to a stud or bolt. The correct connector depends on the connection arrangement of the equipment.
How should the Partex PXP4 connector be installed?
The copper conductor is prepared and inserted into the connector's crimp barrel, then crimped using an appropriate tool and die. The flat pin is subsequently inserted and secured in a compatible electrical terminal according to the equipment manufacturer's installation instructions.
How many Partex PXP4 connectors are supplied in one pack?
The Partex PXP4 is supplied in a pack of 100 copper flat pin connectors, providing a convenient quantity for electrical panel assembly, cable termination and maintenance work.
Professional Cable Connection and Identification Solutions from Partex
Partex supplies cable identification, connection and electrical installation products for professional applications. The PXP4 copper flat pin connector provides a practical solution for terminating 4 mm² copper conductors, combining conductive copper construction, crimp installation and convenient bulk packaging for industrial electrical wiring projects.
