Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
PXL95-8 Partex PXL copper tube ring terminal, 95mm², M8 stud, pack 20
Partex PXL95-8 copper tube ring terminal designed for crimp termination of 95 mm² electrical conductors onto compatible M8 stud connections, supplied in a pack of 20.
£63.06
Why Choose the Partex PXL95-8 Copper Tube Ring Terminal?
The Partex PXL95-8 is a copper tube ring terminal designed for terminating 95 mm² electrical conductors onto equipment with an M8 stud connection. Supplied in a convenient pack of 20, this cable lug provides a practical solution for electrical contractors, switchgear manufacturers, control panel builders and industrial maintenance engineers requiring secure crimped electrical connections.
As part of the Partex PXL copper tube terminal range, the PXL95-8 combines a tubular copper conductor entry with a ring-shaped mounting palm. The copper barrel is designed to be crimped onto a compatible conductor using appropriately selected crimping equipment, while the ring connection allows the terminated cable to be secured to a suitable M8 stud or bolted electrical terminal.
The Partex PXL95-8 is particularly suitable for industrial power distribution, electrical switchgear, motor control equipment, machinery power connections and electrical infrastructure. Its specified 95 mm² conductor size and M8 stud compatibility make it a practical choice for larger cable terminations where the equipment provides an appropriately rated M8 connection, while the 20-piece pack supports professional installation and maintenance operations.
Key Advantages
- Designed for secure termination of 95 mm² electrical conductors.
- M8 ring terminal connection for compatible studs and bolted electrical terminals.
- Copper tube construction provides an electrically conductive termination interface.
- Crimp-type barrel supports mechanical conductor retention when correctly installed.
- Ring-shaped mounting palm provides a positive fastening arrangement at the electrical connection point.
- Suitable for larger conductor terminations in industrial electrical installations.
- Supports dependable cable connections when used with compatible conductors and crimping equipment.
- Practical for electrical distribution, switchgear assembly and machinery power wiring.
- Pack of 20 terminals supports installation, equipment manufacturing and maintenance requirements.
- Part of the Partex PXL copper tube terminal range.
Key Features
- Partex PXL copper tube ring terminal.
- Product reference: PXL95-8.
- 95 mm² nominal conductor size.
- M8 stud compatibility.
- Copper tube terminal construction.
- Ring-type mounting palm with a stud fixing hole.
- Tubular conductor entry for crimp termination.
- Designed for use with compatible electrical conductors.
- Suitable for installation using correctly matched crimping tools and dies.
- Designed for fixed electrical connections.
- Suitable for electrical distribution equipment, switchgear and industrial machinery.
- Provides a practical termination method for larger power conductors.
- Supplied in packs of 20.
Secure Large-Conductor Connections for Industrial Power Distribution
Correct electrical cable termination is essential for maintaining mechanical security and electrical continuity in industrial power installations. Larger electrical conductors require appropriately sized cable lugs and carefully controlled crimping procedures to achieve dependable connections. Copper tube ring terminals provide a practical method of connecting power conductors to equipment studs, electrical distribution assemblies and machinery terminals.
The Partex PXL95-8 is designed for 95 mm² conductors and M8 stud connections. Its tubular copper barrel accepts a suitably prepared conductor for crimping, while the ring-shaped mounting palm allows the terminated cable to be mechanically fastened to a compatible electrical connection point. Correct crimp formation is essential for conductor retention and electrical contact performance.
During installation, the conductor should be stripped to the appropriate length without damaging its strands and inserted fully into the terminal barrel. The lug must then be crimped using tooling and dies suitable for the terminal and conductor combination. The completed ring connection should be secured using appropriate fastening hardware and the tightening torque specified by the equipment manufacturer.
Because the PXL95-8 combines a 95 mm² conductor termination with an M8 stud connection, engineers should pay particular attention to the current rating, contact area, mechanical suitability and terminal arrangement of the connected equipment. The 20-piece pack is convenient for electrical switchgear manufacturing, industrial power distribution wiring and maintenance work requiring multiple identical terminations.
Typical Applications
- Industrial electrical power distribution systems.
- Low-voltage switchgear and distribution assemblies.
- Motor control centres and industrial motor power connections.
- Industrial machinery and equipment power wiring.
- Compatible M8 electrical terminal studs and bolted connections.
- Power distribution cabinets and electrical control equipment.
- Industrial plant electrical infrastructure.
- Electrical maintenance and power cable replacement.
- OEM electrical equipment and switchgear manufacturing.
- Commercial and industrial electrical installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Material | Copper | |
|---|---|---|
| Device Type | Copper Tube Lug | |
| Conductor Size | 95 mm² | |
| Stud Size | M8 | |
| Manufacturer | Partex | |
| Series | PXL Copper Tube Terminals | |
| Model | PXL95-8 | |
| Product type | Copper tube ring terminal | |
| Terminal configuration | Ring cable lug | |
| Nominal conductor cross-sectional area | 95 mm² | |
| Stud size | M8 | |
| Terminal material | Copper | |
| Conductor termination method | Crimping | |
| Equipment connection method | Stud or bolted connection | |
| Conductor entry | Tubular barrel | |
| Mounting arrangement | Ring palm | |
| Quantity per pack | 20 | |
| Typical application | Electrical power cable termination | |
| HS Code | 74031900 |
Frequently Asked Questions
What is the Partex PXL95-8 used for?
The Partex PXL95-8 is a copper tube ring terminal designed to connect a 95 mm² electrical conductor to a compatible M8 stud or bolted electrical terminal using a crimped cable termination.
What cable size is compatible with the PXL95-8?
The PXL95-8 is specified for a nominal conductor cross-sectional area of 95 mm². The conductor construction and terminal compatibility should be checked before crimping to ensure the correct termination arrangement.
What stud size does the Partex PXL95-8 fit?
The PXL95-8 is designed for an M8 stud connection. The equipment terminal must be suitable for the conductor size, electrical load and mechanical connection, and the appropriate fastening torque must be observed.
How is the PXL95-8 copper tube ring terminal installed?
The conductor is stripped to the appropriate length, inserted fully into the terminal's tubular copper barrel and crimped using a suitable tool and die. The ring palm is then secured to the compatible M8 connection point using the appropriate fastening arrangement and specified tightening torque.
How many Partex PXL95-8 terminals are supplied in a pack?
The Partex PXL95-8 is supplied in a pack of 20 terminals, making it suitable for industrial power distribution equipment assembly, repetitive electrical installation work and maintenance stock.
Trusted by Electrical Engineers and Industrial Installers Worldwide
Partex cable connection and identification products support electrical contractors, industrial maintenance engineers, switchgear manufacturers and control panel builders in producing organised and dependable electrical installations. The PXL95-8 copper tube ring terminal provides a practical solution for terminating 95 mm² conductors onto compatible M8 stud connections, with a 20-piece pack suited to professional electrical distribution, equipment manufacturing and maintenance requirements.
