Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2200270 Cembre A7-M14 COPPER TERMINAL
Cembre 2200270 A7-M14 non-insulated tin-plated copper compression ring terminal for terminating 35 mm² copper conductors onto M14 threaded studs.
£3.24
Why Choose the Cembre 2200270 A7-M14 Copper Compression Ring Terminal?
The Cembre 2200270, also designated as the Cembre A7-M14, is a professional non-insulated copper compression ring terminal designed to terminate 35 mm² copper conductors onto M14 threaded studs. Part of the established Cembre A-M cable lug series, it provides a secure, low-resistance connection for industrial switchgear, control panels, machinery and electrical power-distribution equipment.
Manufactured from high-purity electrolytic copper tube, the Cembre A7-M14 combines excellent electrical conductivity with the mechanical strength required to resist vibration and conductor pull-out. The copper is annealed to provide optimum ductility during compression crimping, while the electrolytic tin-plated finish helps protect the terminal against oxidation and corrosion.
The Cembre 2200270 combines a barrel sized for 35 mm² stranded copper cable with a substantial M14 ring palm. Its internally chamfered barrel entry helps guide the conductor strands into position, while the inspection hole allows installers to verify correct conductor insertion before completing the crimp.
Key Advantages
- Designed for dependable termination of 35 mm² copper conductors.
- M14 stud compatibility for secure bolted electrical connections.
- High-purity electrolytic copper provides excellent conductivity.
- Annealed construction supports reliable compression crimping.
- Electrolytic tin plating improves oxidation and corrosion resistance.
- Inspection hole helps confirm full conductor insertion before crimping.
Key Features
- Cembre A-M copper compression ring terminal series.
- Manufacturer part number: 2200270.
- Terminal designation: A7-M14.
- 35 mm² / approximately 2 AWG conductor compatibility.
- M14 ring fixing configuration.
- Internally chamfered barrel for easier conductor insertion.
- Integrated inspection hole for installation verification.
- Suitable for professional compression-crimping systems.
Reliable Compression Termination for M14 Connections
Copper compression terminals create a permanent electrical joint by mechanically compressing the terminal barrel around the conductor strands. When installed with the correct tool and die, the resulting connection provides excellent electrical continuity, strong pull-out resistance and dependable performance under vibration, mechanical stress and thermal cycling.
The M14 ring configuration makes the Cembre A7-M14 suitable for equipment with substantial threaded connection points, while its 35 mm² barrel supports industrial power and distribution conductors. For optimum performance, the terminal should be fitted using compatible Cembre compression tooling selected for the conductor size and terminal series.
Typical Applications
- Industrial switchgear and power-distribution assemblies.
- Control panels and electrical cabinets.
- Busbar and equipment-terminal connections.
- Motor control centres and industrial machinery.
- OEM automation systems and cable assemblies.
- Electrical installation and maintenance projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Number of Fixing Holes | 1 | |
|---|---|---|
| Conductor Size | 35 mm² | |
| Stud Size | M14 | |
| Material | Copper | |
| Palm Angle | Straight (0°) | |
| Suitable Conductor Material | Copper | |
| Device Type | Copper Tube Lug | |
| Series | A-M Ring Terminals | |
| Manufacturer part number | 2200270 | |
| Product type | Non-insulated copper compression ring terminal | |
| Conductor cross-section | 35 mm² | |
| Approximate AWG equivalent | 2 AWG | |
| Compatible conductor | Flexible and stranded copper conductor | |
| Stud size | M14 | |
| Connection angle | 180° / straight | |
| Terminal shape | Ring | |
| Number of fixing holes | 1 | |
| Material | Annealed electrolytic copper tube | |
| Copper purity | Greater than 99.9% | |
| Surface treatment | Electrolytic tin plating | |
| Barrel entry | Internally chamfered | |
| Installation method | Compression crimping | |
| Crimping geometry | Hexagonal or indent, subject to approved tooling | |
| Inspection hole | Yes | |
| Insulated | No | |
| Typical operating temperature | -50 °C to +150 °C | |
| RoHS compliant | Yes | |
| Typical packaging | Bag of 50 terminals | |
| HS Code | 85369010 | |
| Country of Manufacture | Italy |
Frequently Asked Questions
What is the Cembre 2200270 used for?
The Cembre 2200270 is used to terminate 35 mm² copper conductors onto M14 threaded studs in switchgear, machinery and power-distribution equipment.
What conductor size does the Cembre A7-M14 support?
The terminal is designed for 35 mm² flexible or stranded copper conductors, equivalent to approximately 2 AWG.
What stud size is compatible with the Cembre 2200270?
The Cembre 2200270 is manufactured for use with M14 threaded studs and bolts.
Does the Cembre A7-M14 include an inspection hole?
Yes. The barrel incorporates an inspection hole so the installer can confirm that the conductor has been inserted correctly before crimping.
How should the Cembre 2200270 be installed?
The conductor should be stripped to the specified length, inserted fully into the chamfered barrel and compressed using a compatible professional crimping tool with the correct die for a 35 mm² Cembre terminal.
Trusted by Electrical Professionals Worldwide
Cembre A-M copper compression terminals are trusted by electrical contractors, panel builders, OEM manufacturers and maintenance engineers for secure, durable and electrically efficient cable connections.
