Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
OWC6D125 ABB Change-Over Conversion Kit
ABB OWC6D125 is a snap-on change-over conversion kit providing I-O-II operation between two compatible 3- or 4-pole ABB OT30–60 or OT100–125 switch-disconnectors.
£25.55
Why Choose the ABB OWC6D125 Conversion Kit?
The ABB OWC6D125 is a genuine change-over conversion kit designed to connect two compatible ABB switch-disconnectors into a mechanically operated change-over arrangement. Identified by ABB order code 1SCA104494R1001, the kit forms part of the ABB 311020-OT/OETL Accessories product group and provides a compact manufacturer-designed solution for building manual change-over switching assemblies.
The OWC6D125 connects two compatible 3- or 4-pole switch-disconnectors with a mechanism operating between I-O-II positions. This enables selection between two switching sources or circuits with a defined OFF position between them, making the conversion kit suitable for manual transfer and change-over applications in industrial and commercial low-voltage distribution systems.
Designed for compatible ABB OT30–60 and OT100–125 switch-disconnectors, the OWC6D125 uses a compact snap-on mounting arrangement installed on top of the two switches. The mechanism does not require additional footprint area and increases the assembly height by approximately 12 mm, helping maximise available space inside switchboards and electrical enclosures.
Key Advantages
- Genuine ABB conversion kit for compatible OT switch-disconnectors.
- Creates a manual I-O-II change-over mechanism using two switches.
- Suitable for compatible 3- or 4-pole switch-disconnectors.
- Designed for ABB OT30–60 and OT100–125 switching equipment.
- Compact snap-on mounting directly on top of the two switches.
- Requires no additional footprint area within the installation.
- Adds only approximately 12 mm to the assembly height.
Key Features
- ABB OWC6D125 conversion kit.
- ABB order code 1SCA104494R1001.
- Part of the 311020-OT/OETL Accessories product group.
- Change-over switch mechanism for two compatible switch-disconnectors.
- Operates between I-O-II positions.
- Suitable for OT30–60 and OT100–125 switch-disconnectors.
- Supports compatible 3-pole and 4-pole switch arrangements.
- Snap-on installation on top of the switch-disconnectors.
- Approximately 0.09 kg unit weight.
Compact Change-Over Switching for ABB OT Switch-Disconnectors
A change-over mechanism mechanically links two switch-disconnectors so that they operate as a coordinated switching assembly. The ABB OWC6D125 provides I-O-II operation, allowing the mechanism to select the first switch position, move through the central OFF position and then select the second switch position.
The modular design enables a change-over assembly to be constructed from two compatible ABB switch-disconnectors without increasing the installation footprint. The compact snap-on mechanism mounts above the switches and adds approximately 12 mm to the overall height, making it particularly useful where switchboard space is limited.
Typical Applications
- Manual change-over switching systems.
- ABB OT30–60 and OT100–125 switch-disconnector assemblies.
- Industrial electrical switchboards.
- Low-voltage power distribution systems.
- Alternative source and circuit selection.
- Industrial machinery and control panels.
- OEM switchgear and electrical distribution assemblies.
Technical Specifications
| Product group | 311020-OT/OETL Accessories |
|---|---|
| Order code | 1SCA104494R1001 |
| Product type | Conversion kit |
| Mechanism type | Change-over switch mechanism |
| Suitable for | OT30–60 and OT100–125 switch-disconnectors |
| Switch configuration | Two 3- or 4-pole switches |
| Operating positions | I-O-II |
| Mounting type | Snap-on mounting on top of switches |
| Additional footprint required | None |
| Additional assembly height | approx. 12 mm |
| Weight | approx. 0.09 kg |
Frequently Asked Questions
What is the ABB OWC6D125 used for?
The OWC6D125 is a conversion kit for creating a manual change-over mechanism from two compatible ABB switch-disconnectors, providing I-O-II switching operation.
Which ABB switches are compatible with the OWC6D125?
The OWC6D125 is designed for compatible ABB OT30–60 and OT100–125 switch-disconnectors.
What switching positions does the ABB OWC6D125 provide?
The OWC6D125 provides I-O-II operation, allowing selection between two switch positions with a central OFF position.
Can the OWC6D125 be used with 3-pole and 4-pole switches?
Yes. The change-over mechanism is designed to connect two compatible 3- or 4-pole switch-disconnectors.
How is the ABB OWC6D125 installed?
The OWC6D125 uses a compact snap-on mechanism mounted on top of two compatible switch-disconnectors. It requires no additional footprint area and increases the assembly height by approximately 12 mm.
Designed for ABB OT Switch-Disconnectors
ABB OT/OETL conversion accessories provide purpose-designed solutions for building compact manual switching arrangements from compatible ABB switch-disconnectors, supporting dependable change-over operation in industrial and commercial power distribution systems.
