Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 289882 (7GDS289882R0000) is an IP42 roof component for 800 x 600 motor control centre enclosures from the ABB GT product group, designed for upper enclosure protection within compatible industrial MCC assemblies.
£248.76
The ABB 289882 (7GDS289882R0000) is an IP42 roof component for 800 × 600 MCC assemblies, designed for use with compatible industrial motor control centre enclosures. Manufactured by ABB and classified within the ABB GT product group, this roof component forms part of the enclosure construction, providing an upper covering for electrical equipment housed within the appropriate motor control centre configuration.
Motor control centres (MCCs) are widely used in industrial facilities to house motor starters, protective devices, switching equipment and associated electrical control components. Proper enclosure construction helps protect installed equipment against environmental influences and supports safe, organised electrical distribution. The ABB 289882 is specified as an IP42 roof, intended to contribute to the enclosure protection arrangement when installed with compatible MCC equipment.
Designed for an 800 × 600 MCC configuration, the ABB 289882 provides a manufacturer-identified roof component for suitable electrical enclosure assemblies. Its ABB order code, 7GDS289882R0000, enables accurate product identification for new MCC construction, maintenance, refurbishment and replacement part procurement.
Motor control centre enclosures provide the structural housing for electrical equipment used to control, protect and distribute power to industrial motors. Enclosure components such as roof panels, side covers, doors and internal partitions contribute to the overall mechanical construction and environmental protection of the completed assembly.
The ABB 289882 IP42 roof is intended for a compatible 800 × 600 MCC enclosure configuration. The IP42 designation refers to protection against access to hazardous parts with a finger, ingress of solid foreign objects of 1 mm diameter and greater, and vertically falling water drops when the enclosure is tilted by up to 15 degrees. This protection classification is defined under IEC 60529.
The stated IP42 designation applies to the intended roof and enclosure configuration rather than guaranteeing the protection rating of an independently installed component. The protection level of the completed motor control centre depends on the correct combination of enclosure components, installation arrangements, seals and other construction details.
For industrial electrical installations, correctly specified enclosure roof components help maintain the intended equipment arrangement and provide a suitable upper covering. The ABB 289882 should be selected according to the original MCC assembly design and installed in accordance with the relevant manufacturer's instructions.
| Product group | GT |
|---|---|
| Manufacturer reference | 289882 |
| Model / order code | 7GDS289882R0000 |
| Product description | IP42 roof, 800 × 600 MCC |
| Product type | Motor control centre enclosure roof |
| Protection designation | IP42 |
| MCC size designation | 800 × 600 |
| Nominal enclosure configuration | 800 × 600 mm |
| Equipment type | Motor Control Centre (MCC) |
| Component function | Upper enclosure covering and protection |
| Installation position | Roof / top of compatible MCC enclosure |
| Application | Industrial motor control centre enclosure assemblies |
| Equipment compatibility | ABB MCC assemblies specified for part 289882 |
The ABB 289882 is an IP42 roof component intended for compatible 800 × 600 MCC enclosures. It forms part of the upper enclosure construction in industrial motor control centre assemblies.
IP42 is an enclosure protection classification defined by IEC 60529. It indicates protection against access with a finger, solid foreign objects of 1 mm diameter and greater, and vertically falling water drops when the enclosure is tilted by up to 15 degrees. The complete enclosure must be correctly assembled to achieve its specified protection rating.
The ABB 289882 is specified for an 800 × 600 MCC configuration. The exact physical roof dimensions, mounting arrangement and compatible enclosure models should be checked against the applicable ABB assembly documentation.
Yes, the ABB 289882 can be used as a replacement where the original motor control centre assembly specifies this exact component. Compatibility should be verified using the ABB manufacturer reference 289882 and order code 7GDS289882R0000.
No. The ABB 289882 is an individual enclosure roof component. The final IP42 protection rating depends on the design and correct assembly of the complete MCC enclosure, including its doors, covers, seals and associated components.
ABB 289882 (7GDS289882R0000) is a manufacturer-identified IP42 roof component for 800 × 600 MCC configurations within the ABB GT product group, providing a specified upper enclosure component for compatible industrial motor control centre assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.