Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 289876 Cover Plate, Ventilated, order code 7GDS289876R0000, is a manufacturer-specific ventilated enclosure cover plate designed for designated positions within compatible ABB GT electrical switchgear and power distribution cabinet assemblies.
£91.11
The ABB 289876 Cover Plate, Ventilated is a manufacturer-specific electrical enclosure accessory belonging to the ABB GT product group. Identified by ABB order code 7GDS289876R0000, this ventilated cover plate is intended for compatible electrical switchgear, power distribution cabinets and equipment assemblies requiring the specified ventilated covering arrangement.
Ventilated cover plates provide physical covering for designated equipment openings while incorporating ventilation features that permit air movement through the plate. In appropriately designed electrical enclosures, these features can contribute to the intended airflow arrangement and support the thermal management strategy of the complete assembly.
The ABB 289876 is specifically identified by the manufacturer designation COVER PLATE, VENTILATED. This distinguishes it from closed cover plates and other enclosure accessories with different opening patterns, dimensions or mounting arrangements.
As a dedicated ABB GT component, the 289876 supports accurate product selection for original equipment construction, electrical panel assembly, switchgear maintenance and matching replacement applications. Its exact dimensions, ventilation geometry and installation position should be verified against the relevant ABB equipment documentation.
Electrical switchgear and power distribution cabinets often contain components that generate heat during normal operation. Depending on the equipment design, the enclosure may incorporate designated ventilation openings to support air circulation and help manage internal operating temperatures.
The ABB 289876 Cover Plate, Ventilated provides a manufacturer-specific covering component for a designated location within a compatible ABB GT assembly. Unlike a closed cover plate, its ventilated configuration allows air to pass through openings in the covering surface.
Ventilation can form part of a wider thermal management arrangement involving the cabinet layout, internal heat sources, air circulation paths and ambient operating conditions. However, the presence of a ventilated cover plate does not independently establish a particular cooling capacity, airflow rate or allowable equipment temperature.
The exact opening pattern and free ventilation area of the ABB 289876 are not established by the product designation alone. These characteristics should be confirmed from the relevant ABB technical documentation when assessing airflow requirements or replacement compatibility.
Correct component selection is particularly important because replacing a ventilated cover plate with a closed variant, or vice versa, may alter the intended ventilation arrangement of the equipment. The specified cover configuration should therefore be maintained unless an alternative has been approved for the complete assembly.
A ventilated plate may also affect the completed enclosure's resistance to dust, water ingress or access to internal parts. The IP protection rating, accessibility provisions and any other applicable performance characteristics must be established for the complete installed assembly rather than assumed from the individual cover plate.
During installation, the ABB 289876 should be positioned and secured according to the manufacturer's instructions. Ventilation openings should remain unobstructed where required by the equipment design, and the completed assembly should be checked for correct fitment before energisation.
| Product group | GT |
|---|---|
| Product designation | COVER PLATE, VENTILATED |
| Product type | Ventilated cover plate |
| Cover configuration | Ventilated |
| ABB order code | 7GDS289876R0000 |
| Manufacturer part number | 289876 |
| Component category | Switchgear ventilated cover plates and enclosure accessories |
| Primary function | Physical covering of designated equipment sections with provision for ventilation |
| Application | Electrical switchgear and power distribution cabinet assemblies |
| Component function | Mechanical enclosure covering and airflow provision |
| Compatibility | ABB GT equipment configurations specifying ventilated cover plate 289876 |
| Installation requirements | According to the applicable ABB equipment documentation |
The ABB 289876 is a ventilated cover plate intended for compatible ABB GT electrical switchgear and cabinet assemblies. It provides physical covering for a designated equipment section while allowing airflow through its ventilation openings.
The manufacturer's order code is 7GDS289876R0000, and the product part number is 289876.
A ventilated cover plate incorporates openings that allow air movement through the covering surface, whereas a closed cover plate provides a covering arrangement without dedicated ventilation openings. The correct configuration depends on the requirements of the associated equipment assembly.
No specific cooling capacity, airflow rate or IP protection rating is established by the ABB 289876 product designation. These characteristics depend on the cover plate's detailed construction and the design and verification of the complete electrical enclosure.
No. Ventilated cover plates may differ in dimensions, mounting arrangements, opening patterns and equipment compatibility. The ABB 289876 Cover Plate, Ventilated should only be installed where the relevant ABB equipment documentation specifies this component or confirms its suitability.
ABB supplies electrical distribution and switchgear components for industrial and commercial applications. The ABB 289876 Cover Plate, Ventilated, order code 7GDS289876R0000, provides a manufacturer-specific ventilated enclosure component for compatible ABB GT assemblies, supporting accurate component selection, designated airflow arrangements and effective switchgear maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.