Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 289772 IP42 Roof 1200 × 800 MCC (7GDS289772R0000) is a protective enclosure roof designed for compatible 1200 × 800 mm motor control centre assemblies requiring an IP42 roof configuration.
£316.15
The ABB 289772 IP42 Roof 1200 × 800 MCC, manufacturer order code 7GDS289772R0000, is a purpose-designed protective roof panel for motor control centre (MCC) enclosures. As part of the ABB GT product group, this enclosure accessory is intended for compatible low-voltage switchgear and motor control centre assemblies requiring an IP42-rated roof configuration.
Designed for MCC enclosures with a nominal footprint of 1200 mm × 800 mm, the roof forms part of the upper enclosure structure and helps protect internal electrical equipment against the ingress of foreign objects and vertically falling water droplets within the limits of the specified protection classification. Its application-specific dimensions support integration into appropriately configured ABB switchgear assemblies.
The IP42 designation identifies protection against solid foreign objects larger than 1 mm and vertically falling water droplets when the enclosure is tilted up to 15 degrees. The ABB 289772 roof is therefore suitable for correctly configured indoor industrial switchgear installations where this level of enclosure protection is required. The complete assembly must be designed and installed appropriately to achieve its intended ingress protection rating.
Motor control centres are used to distribute electrical power and accommodate motor starters, protection devices, switching equipment and associated control components. Their enclosures provide mechanical protection and help limit exposure of internal electrical equipment to environmental conditions. Correctly selected roof panels are important parts of the complete enclosure structure.
The ABB 289772 IP42 Roof 1200 × 800 MCC is intended for compatible motor control centre assemblies with a nominal width of 1200 mm and depth of 800 mm. Its IP42 designation supports applications requiring protection against objects larger than 1 mm and dripping water within the limits defined by IEC/EN 60529.
The ingress protection of a complete MCC depends on the correct combination and installation of its roof, doors, side panels, cable entries, joints and other enclosure components. The ABB 289772 should therefore be installed according to the applicable switchgear assembly documentation, with suitable mounting arrangements and any required sealing components. The roof designation alone does not establish the IP rating of an incomplete or incorrectly assembled enclosure.
| Product group | GT |
|---|---|
| Product reference | 289772 |
| ABB order code | 7GDS289772R0000 |
| Product name | IP42 Roof 1200 × 800 MCC |
| Product type | Protective switchgear enclosure roof |
| Ingress protection designation | IP42 |
| Nominal enclosure width | 1200 mm |
| Nominal enclosure depth | 800 mm |
| Nominal enclosure footprint | 1200 × 800 mm |
| IP code standard | IEC/EN 60529 |
| Solid object protection | Objects larger than 1 mm |
| Water ingress protection | Vertically falling water droplets with enclosure tilted up to 15° |
| Equipment type | Motor control centre (MCC) |
| Installation position | Enclosure roof / top section |
| Component function | Mechanical enclosure covering and ingress protection |
| Application | Compatible low-voltage motor control centre assemblies |
| Equipment category | Switchgear enclosure accessory |
The ABB 289772 is a protective roof panel designed for compatible motor control centre enclosures with a nominal footprint of 1200 × 800 mm. It forms part of the enclosure structure and supports the specified IP42 protection arrangement.
The manufacturer order code is 7GDS289772R0000, corresponding to the ABB 289772 IP42 Roof 1200 × 800 MCC.
IP42 is an ingress protection classification defined by IEC/EN 60529. The first digit indicates protection against solid foreign objects larger than 1 mm, while the second indicates protection against vertically falling water droplets when the enclosure is tilted up to 15 degrees.
The ABB 289772 is designated for a motor control centre enclosure with a nominal width of 1200 mm and depth of 800 mm. Compatibility with the particular enclosure construction should be confirmed before installation.
The IP42 classification provides limited protection against dripping water and does not indicate resistance to driving rain, water jets or prolonged outdoor weather exposure. Outdoor suitability depends on the complete enclosure design and environmental requirements.
No. The IP42 rating of a complete enclosure depends on the design and correct installation of all relevant components, including the roof, doors, panels, cable entries and sealing arrangements. The roof must be used as part of a compatible enclosure configuration.
Yes, it can be selected as a replacement where the existing switchgear assembly specifies the ABB 289772 IP42 Roof 1200 × 800 MCC. The enclosure model, dimensions, mounting arrangement and required protection classification should match the original installation.
ABB switchgear enclosure accessories support the construction and maintenance of industrial electrical distribution and motor control systems. The ABB 289772 IP42 Roof 1200 × 800 MCC provides a specifically identified protective roof component for compatible motor control centre assemblies, helping panel builders and maintenance engineers maintain the intended enclosure configuration and ingress protection arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.