Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 289631 FE Mounting Plate 10E 3 Poles, order code 7GDS289631R0000, is a manufacturer-specific mechanical mounting plate in ABB product group GT intended for compatible three-pole electrical equipment arrangements, panel assembly and replacement maintenance.
£32.43
The ABB 7GDS289631R0000, identified by manufacturer reference 289631, is an FE Mounting Plate 10E 3 Poles intended for use within compatible ABB electrical distribution and control equipment assemblies. Classified under ABB product group GT, this manufacturer-specific mechanical component carries the official product designation 289631 FE MOUNTING PLATE 10E 3 POLES.
Mounting plates provide a defined mechanical foundation for positioning and securing electrical equipment within compatible panel structures. The ABB 289631 is specifically identified for a three-pole arrangement, with the manufacturer's FE and 10E designations distinguishing it from other mounting plate configurations. Correct component selection helps maintain the intended equipment layout, fixing arrangement and mechanical integration.
With the full ABB order code 7GDS289631R0000, this mounting plate can be accurately identified for electrical equipment construction, servicing, refurbishment and spare parts procurement. Specifying the complete manufacturer reference helps engineers, panel builders and purchasing teams select the intended component rather than an unverified alternative.
Electrical distribution and control assemblies rely on correctly specified mounting components to establish the intended position of internal equipment. Mounting plates form part of the mechanical construction of these assemblies and must correspond to the surrounding frame, compartment and equipment configuration. Selecting the appropriate plate helps maintain the intended component arrangement and facilitates installation and maintenance in accordance with the manufacturer's instructions.
The ABB 289631 FE Mounting Plate 10E 3 Poles is identified for a three-pole equipment arrangement. This designation describes the associated mounting configuration and does not mean that the plate itself is a three-pole electrical switching device. Electrical characteristics such as rated current, operating voltage and short-circuit performance depend on the complete equipment assembly and its installed components.
The FE and 10E references are part of ABB's official product designation. The supplied identification does not independently confirm their precise dimensional meaning, the plate material, thickness, load capacity or fixing-hole pattern. These characteristics should be checked against the relevant ABB technical documentation before installation. Using the complete 7GDS289631R0000 order code helps avoid confusion with other ABB mounting plate variants.
| Product group | GT |
|---|---|
| Product reference | 289631 |
| ABB order code | 7GDS289631R0000 |
| Product type | Mounting plate |
| Product category | Electrical panel mounting components and mechanical accessories |
| Manufacturer configuration | FE |
| Manufacturer size or arrangement designation | 10E |
| Pole configuration | 3 poles |
| Component function | Mechanical mounting plate for a compatible three-pole equipment arrangement |
| Application | Compatible ABB electrical distribution and control equipment assemblies |
| Installation type | Integration into the corresponding manufacturer-specified mounting arrangement |
| Replacement reference | ABB 289631 |
| Compatibility | ABB equipment specified for part number 289631 or order code 7GDS289631R0000 |
The ABB 7GDS289631R0000 is an FE mounting plate designated for a three-pole equipment arrangement with the manufacturer's 10E reference. It is intended for compatible ABB electrical equipment assemblies that specify this component.
The manufacturer product reference is 289631, and the full ABB order code is 7GDS289631R0000. The official product designation is 289631 FE MOUNTING PLATE 10E 3 POLES.
The 3 poles designation identifies the associated three-pole equipment arrangement. It does not indicate that the mounting plate itself performs electrical switching or has an independent current rating.
FE and 10E form part of ABB's manufacturer designation for this mounting plate variant. Their precise equipment-specific and dimensional significance should be verified against the relevant ABB technical documentation rather than assumed from the product name alone.
Not without confirmation from ABB's equipment documentation. The ABB 289631 is designated as an FE Mounting Plate 10E 3 Poles, while the ABB 289630 is designated as an FD Mounting Plate Plug-In 8E 3 Poles. Their different manufacturer references and configurations mean that physical compatibility and interchangeability must be verified before substitution.
ABB supplies electrical distribution, control and automation equipment for industrial and commercial applications. The ABB 289631 FE Mounting Plate 10E 3 Poles (7GDS289631R0000) is a manufacturer-identified mechanical component within ABB product group GT, supporting accurate spare parts selection, equipment assembly and maintenance of compatible three-pole electrical equipment arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.