Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
7GDS289188R0000 ABB 289188 Incoming Stab Module
ABB 289188 incoming stab module, order code 7GDS289188R0000, an electrical connection component from the ABB GT product group intended for manufacturer-specified incoming connection arrangements in compatible industrial switchgear and power distribution assemblies.
£120.96
Why Choose the ABB 289188 Incoming Stab Module?
The ABB 289188 is a dedicated incoming stab module intended for integration into compatible industrial electrical switchgear and power distribution assemblies. Identified by ABB order code 7GDS289188R0000, this component belongs to the ABB GT product group and provides a manufacturer-identified module for designated incoming electrical connection arrangements.
Incoming stab modules are associated with electrical connection systems in which contact elements interface with corresponding connection points within a switchgear assembly. The ABB 289188 incoming stab module is intended for applications where the manufacturer specifies this particular component as part of the equipment's electrical connection arrangement.
For electrical panel builders, switchgear manufacturers and industrial maintenance engineers, correct component identification is essential when assembling or servicing electrical distribution equipment. The ABB 289188 provides a clearly identified product for compatible ABB GT installations, supporting accurate selection, procurement and replacement through its dedicated manufacturer order code.
Key Advantages
- Dedicated ABB incoming stab module for compatible electrical switchgear assemblies.
- Manufacturer-identified component within the ABB GT product group.
- Intended for designated incoming electrical connection arrangements.
- Supports correct component selection for compatible switchgear connection systems.
- Provides a specific replacement reference for equipment maintenance and refurbishment.
- Relevant to industrial electrical distribution and switchgear assembly projects.
- Supports manufacturer-specified equipment configurations and component identification.
- ABB order code 7GDS289188R0000 enables accurate product identification and procurement.
Key Features
- ABB GT product group.
- 289188 incoming stab module product designation.
- Electrical connection module for compatible switchgear equipment.
- Identified for use in designated incoming connection arrangements.
- Intended for integration with corresponding components in compatible ABB equipment.
- Relevant to manufacturer-specified power distribution connection systems.
- Suitable for compatible equipment assembly and replacement applications.
- Dedicated manufacturer identification for maintenance and procurement.
- ABB manufacturer order code: 7GDS289188R0000.
Incoming Electrical Connections for Industrial Power Distribution
Industrial electrical switchgear and power distribution systems rely on appropriately designed connection arrangements to transfer electrical power between designated sections of an assembly. Depending on the equipment design, these arrangements may incorporate fixed contacts, mating connection elements, busbar interfaces and other specialised electrical components.
The ABB 289188 incoming stab module is a manufacturer-identified component for compatible ABB GT equipment. Its incoming stab designation makes it relevant to switchgear configurations requiring a corresponding connection module as part of the manufacturer's specified electrical arrangement.
Correct selection of an incoming connection component is particularly important because electrical contact systems must be compatible with the complete equipment design. Relevant considerations include the mating connection arrangement, electrical ratings, conductor configuration, insulation requirements, contact alignment and installation method.
The ABB 289188 should be installed only in equipment configurations for which ABB specifies this component. Its rated voltage, current-carrying capacity, short-circuit performance, contact construction and dimensional compatibility must be confirmed against the relevant manufacturer documentation. These characteristics cannot be established from the product designation alone.
Electrical connection modules should be installed, inspected and maintained by appropriately qualified personnel using the manufacturer's approved procedures. Equipment must be safely isolated before installation or servicing, and the complete switchgear assembly must be assessed against its applicable electrical and mechanical requirements.
Typical Applications
- Compatible ABB GT electrical switchgear assemblies.
- Industrial electrical power distribution equipment.
- Manufacturer-specified incoming stab connection arrangements.
- Electrical switchboards incorporating compatible connection modules.
- Industrial switchgear manufacturing and assembly projects.
- Maintenance of designated incoming electrical connection components.
- Refurbishment of existing compatible ABB distribution equipment.
- Replacement of specified incoming stab modules in compatible installations.
Technical Specifications
| Product group | GT |
|---|---|
| Product designation | 289188 INCOMING STAB ,MODULE |
| Product type | Incoming stab module |
| ABB order code | 7GDS289188R0000 |
| Component category | Electrical switchgear connection module |
| Connection designation | Incoming |
| Primary function | Component for a manufacturer-specified incoming stab connection arrangement |
| Application | Compatible industrial electrical switchgear and power distribution assemblies |
| Installation | According to the applicable ABB GT assembly documentation |
| Compatibility | ABB equipment configurations specified for component 289188 |
Frequently Asked Questions
What is the ABB 289188 used for?
The ABB 289188 is an incoming stab module intended for use in compatible ABB GT electrical switchgear and power distribution assemblies. It is identified for manufacturer-specified incoming electrical connection arrangements.
What is an incoming stab module in electrical switchgear?
An incoming stab module is a component associated with an electrical connection arrangement using stab-type contacts or interfaces. Such arrangements may be used to establish electrical connections between designated equipment sections. The exact configuration and function of the ABB 289188 must be confirmed from the applicable ABB documentation.
What is the ABB order code for the 289188 incoming stab module?
The manufacturer order code is 7GDS289188R0000, which identifies the ABB 289188 incoming stab module for product selection, ordering and replacement.
Can the ABB 289188 be used as a replacement component?
Yes, the ABB 289188 may be considered for replacement or refurbishment where the relevant ABB equipment documentation specifies this particular incoming stab module. The mating connection arrangement, equipment configuration and electrical compatibility must be verified before installation.
What are the voltage and current ratings of the ABB 289188?
The voltage and current ratings of the ABB 289188 are not established by the supplied product designation. These values, together with any applicable short-circuit performance and installation requirements, should be confirmed using the official ABB technical documentation for the complete compatible switchgear assembly.
Trusted by Electrical Panel Builders and Industrial Engineers
ABB supplies electrical distribution, automation and switchgear components used by industrial equipment manufacturers, electrical panel builders and maintenance engineers worldwide. The ABB 289188 incoming stab module provides a manufacturer-identified component for compatible electrical switchgear connection arrangements, equipment maintenance and industrial power distribution refurbishment projects.
