Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
7GDS289186R0000 ABB 289186 Incoming Stab Module – GT Electrical Connection Component
ABB 289186 Incoming Stab Module (7GDS289186R0000) is a manufacturer-specific electrical connection component from the ABB GT product group, intended for incoming connection arrangements within compatible industrial switchgear and electrical equipment assemblies.
£19.56
Why Choose the ABB 289186 Incoming Stab Module?
The ABB 289186 Incoming Stab Module (7GDS289186R0000) is a manufacturer-specific electrical connection component belonging to the ABB GT product group. Identified by product reference 289186, this component is designated as an incoming stab module and is intended for integration within compatible ABB industrial electrical equipment assemblies.
Incoming stab connections are associated with electrical distribution and switchgear arrangements in which designated contact interfaces provide a connection between compatible equipment sections. In modular switchgear construction, correct alignment and engagement of electrical contacts are important considerations for maintaining the intended connection arrangement. The ABB 289186 is identified specifically as an incoming stab module, distinguishing it from general-purpose mechanical modules and unrelated electrical accessories.
The ABB 289186 Incoming Stab Module provides a dedicated manufacturer reference for original equipment assembly, maintenance and specified replacement applications. Its ABB order code, 7GDS289186R0000, supports accurate identification and procurement. The exact contact arrangement, electrical ratings, mounting dimensions and compatible switchgear configurations should be confirmed using the relevant ABB technical drawings and assembly instructions.
Key Advantages
- ABB manufacturer-specific incoming stab module for compatible GT electrical equipment assemblies.
- Provides a designated component for incoming electrical connection arrangements.
- Supports integration with compatible modular switchgear connection interfaces.
- Helps maintain the manufacturer-specified connection configuration when correctly installed.
- Provides a dedicated product reference for equipment assembly and replacement selection.
- Supports maintenance and refurbishment of compatible industrial electrical distribution equipment.
- Facilitates accurate component identification within ABB equipment documentation and parts lists.
- Unique ABB order code simplifies procurement and spare parts management.
- Helps distinguish the incoming stab module from other ABB GT modules and connection components.
Key Features
- Manufacturer: ABB.
- Product designation: 289186 Incoming Stab Module.
- ABB order code: 7GDS289186R0000.
- Product reference: 289186.
- Product group: GT.
- Incoming stab connection module designation.
- Intended for compatible industrial electrical equipment assemblies.
- Associated with manufacturer-specified incoming electrical connection arrangements.
- Suitable for original equipment assembly where this exact module is specified.
- Supports designated replacement and maintenance requirements.
- Electrical interfaces and mounting requirements determined by the applicable ABB equipment design.
Reliable Incoming Connection Integration for Industrial Switchgear
Industrial switchgear and electrical distribution assemblies depend on correctly specified connection components to establish their intended electrical interfaces. Stab-type connection arrangements commonly rely on suitable contact engagement, mechanical positioning and compatibility between mating components. Incorrectly selected or installed connection parts can affect the integrity of the overall electrical assembly.
The ABB 289186 Incoming Stab Module is identified as a dedicated component within the ABB GT product group. Its manufacturer designation allows equipment builders and maintenance personnel to distinguish the incoming stab module from other modular equipment parts, including components intended for different connection positions or functions.
Before installing or replacing the ABB 289186, the relevant ABB assembly documentation should be consulted to establish the required contact configuration, mating interface, mounting position and electrical ratings. The product designation does not independently confirm a particular rated current, rated voltage, number of poles, contact material or short-circuit withstand capability.
Electrical connection components should be installed and inspected by appropriately qualified personnel following the applicable ABB instructions and electrical safety procedures. Before maintenance, the equipment must be safely isolated, secured against unintended re-energisation and verified as de-energised using an appropriate procedure. Following installation, the connection arrangement should be checked against the manufacturer's requirements before the equipment is returned to service.
Typical Applications
- Compatible ABB GT industrial electrical equipment assemblies.
- Incoming electrical connection arrangements in designated switchgear configurations.
- Industrial low-voltage distribution equipment assembly.
- Modular switchgear connection interfaces where ABB 289186 is specified.
- Original equipment manufacturing requiring an incoming stab module.
- Replacement of designated ABB incoming connection components.
- Electrical switchgear maintenance and refurbishment.
- Spare parts identification and inventory management for compatible ABB equipment.
Technical Specifications
| Product group | GT |
|---|---|
| Product designation | 289186 INCOMING STAB ,MODULE |
| Product reference | 289186 |
| ABB order code | 7GDS289186R0000 |
| Product type | Incoming stab module |
| Component category | Electrical connection module |
| Connection designation | Incoming stab |
| Equipment association | ABB GT product group |
| Primary application | Incoming connection arrangements in compatible electrical equipment assemblies |
| Installation | Manufacturer-specified module position and connection interface |
| Compatibility | Subject to the applicable ABB equipment and assembly documentation |
| Manufacturer identification | ABB 289186 / 7GDS289186R0000 |
Frequently Asked Questions
What is the ABB 289186 Incoming Stab Module used for?
The ABB 289186 Incoming Stab Module is a manufacturer-specific component intended for incoming electrical connection arrangements within compatible ABB GT equipment assemblies. Its precise contact configuration and installation requirements depend on the associated ABB equipment design.
What is the ABB order code for the 289186 Incoming Stab Module?
The manufacturer order code is 7GDS289186R0000, and the associated product reference is 289186. These identifiers should be used when checking equipment parts lists or sourcing a replacement component.
What does incoming stab mean in the ABB 289186 product designation?
An incoming stab generally refers to an electrical contact interface associated with an incoming connection in an equipment assembly. The ABB 289186 is specifically designated as an incoming stab module, but its exact contact geometry, mating components and electrical function must be confirmed using the applicable ABB documentation.
What are the voltage and current ratings of the ABB 289186 Incoming Stab Module?
The supplied product identification does not establish a specific rated voltage, rated current or short-circuit withstand rating. These values must be verified from the relevant ABB technical documentation and the ratings of the complete equipment assembly before the module is selected or installed.
Can the ABB 289186 Incoming Stab Module be replaced with another ABB GT module?
Interchangeability should not be assumed. The ABB 289186 has the dedicated order code 7GDS289186R0000 and an incoming stab module designation. Any proposed replacement must be confirmed as compatible with the original equipment's contact arrangement, mounting interfaces, electrical ratings and ABB assembly requirements.
ABB Incoming Connection Components for Industrial Electrical Equipment
The ABB 289186 Incoming Stab Module provides a manufacturer-identified connection component for compatible ABB GT electrical assemblies. Accurate selection of the specified module supports equipment construction, maintenance and refurbishment by helping technical teams maintain the intended incoming connection arrangement and associated equipment configuration.
